Simulation of material flow in friction stir processing of a cast Al–Si alloy S Tutunchilar, M Haghpanahi, MKB Givi, P Asadi, P Bahemmat Materials & Design 40, 415-426, 2012 | 172 | 2012 |
Study on dissimilar friction stir butt welding of AA7075-O and AA2024-T4 considering the manufacturing limitation P Bahemmat, M Haghpanahi, MK Besharati Givi, K Reshad Seighalani The International Journal of Advanced Manufacturing Technology 59, 939-953, 2012 | 108 | 2012 |
Study on mechanical, micro-, and macrostructural characteristics of dissimilar friction stir welding of AA6061-T6 and AA7075-T6 P Bahemmat, M Haghpanahi, MK Besharati, S Ahsanizadeh, H Rezaei Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2010 | 89 | 2010 |
Investigations on the effects of the tool material, geometry, and tilt angle on friction stir welding of pure titanium K Reshad Seighalani, MK Besharati Givi, AM Nasiri, P Bahemmat Journal of materials engineering and performance 19, 955-962, 2010 | 89 | 2010 |
Study on governing parameters of thermal history during underwater friction stir welding H Papahn, P Bahemmat, M Haghpanahi, C Sommitsch The International Journal of Advanced Manufacturing Technology 78, 1101-1111, 2015 | 52 | 2015 |
Mechanical, micro-, and macrostructural analysis of AA7075–T6 fabricated by friction stir butt welding with different rotational speeds and tool pin profiles P Bahemmat, MK Besharati, M Haghpanahi, A Rahbari, R Salekrostam Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2010 | 50 | 2010 |
Enhancing metallurgical and mechanical properties of friction stir lap welding of Al–Cu using intermediate layer M Akbari, P Bahemmat, M Haghpanahi, MK Besharati Givi Science and Technology of Welding and Joining 18 (6), 518-524, 2013 | 42 | 2013 |
3-D transient analytical solution based on Green’s function to temperature field in friction stir welding M Haghpanahi, S Salimi, P Bahemmat, S Sima Applied Mathematical Modelling 37 (24), 9865-9884, 2013 | 37 | 2013 |
Influence of friction stir processing parameters on the fabrication of SiC/316L surface composite R Salekrostam, MKB Givi, P Asadi, P Bahemmat Defect and diffusion forum 297, 221-226, 2010 | 34 | 2010 |
Experimental study on the effect of rotational speed and tool pin profile on aa2024 aluminium friction stir welded butt joints P Bahemmat, A Rahbari, M Haghpanahi, MK Besharati ASME Early Career Technical Conference, Miami, Florida, USA, 2008 | 34 | 2008 |
A 3D transient analytical solution to the temperature field during dissimilar welding processes S Salimi, P Bahemmat, M Haghpanahi International Journal of Mechanical Sciences 79, 66-74, 2014 | 31 | 2014 |
Effect of cooling media on residual stresses induced by a solid-state welding: underwater FSW H Papahn, P Bahemmat, M Haghpanahi The International Journal of Advanced Manufacturing Technology 83, 1003-1012, 2016 | 25 | 2016 |
Effect of friction stir welding tool on temperature, applied forces and weld quality H Papahn, P Bahemmat, M Haghpanahi, I Pour Aminaie IET Science, Measurement & Technology 9 (4), 475-484, 2015 | 20 | 2015 |
Fabrication of cooling channels employing worm voids caused by friction stir based process: considering cooling and fluid parameters S Salimi, M Haghpanahi, P Bahemmat Journal of Manufacturing Processes 35, 61-70, 2018 | 13 | 2018 |
Ultrasonic measurements of residual stresses caused by severe thermomechanical deformation during FSW H Papahn, P Bahemmat, M Haghpanahi, A Valipour Experimental Mechanics 54, 1587-1596, 2014 | 12 | 2014 |
An analytical solution to the thermal problems with varying boundary conditions around a moving source S Salimi, P Bahemmat, M Haghpanahi Applied Mathematical Modelling 40 (13-14), 6690-6707, 2016 | 11 | 2016 |
Analytical model for the temperature field around a nonuniform three-dimensional moving heat source: friction stir welding modelling S Salimi, P Bahemmat, M Haghpanahi Journal of Engineering Mathematics 98, 71-91, 2016 | 11 | 2016 |
Study on residual stresses caused by underwater friction stir welding: FE modeling and ultrasonic measurement S Salimi, P Bahemmat, M Haghpanahi Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2019 | 10 | 2019 |
Thermal analysis of the rotor of large air-cooled turbo generators M Mohammadi, H Ansari, P Bahemmat, AA Kharamani The 3rd Conference on Thermal Power Plants, 1-6, 2011 | 9 | 2011 |
Using a novel fixture to study of temperature and applied forces during friction stir welding H Papahn, M Haghpanahi, P Bahemmat Journal of the Brazilian Society of Mechanical Sciences and Engineering 39 …, 2017 | 5 | 2017 |