| Fatigue life and mechanistic modeling of interior micro-defect induced cracking in high cycle and very high cycle regimes ML Zhu, L Jin, FZ Xuan Acta Materialia 157, 259-275, 2018 | 144 | 2018 |
| Correlation between microstructure, hardness and strength in HAZ of dissimilar welds of rotor steels ML Zhu, FZ Xuan Materials Science and Engineering: A 527 (16-17), 4035-4042, 2010 | 128 | 2010 |
| Very high cycle fatigue behavior of a low strength welded joint at moderate temperature ML Zhu, FZ Xuan, YN Du, ST Tu International journal of fatigue 40, 74-83, 2012 | 77 | 2012 |
| Effect of load ratio on fatigue crack growth in the near-threshold regime: A literature review, and a combined crack closure and driving force approach ML Zhu, FZ Xuan, ST Tu Engineering Fracture Mechanics 141, 57-77, 2015 | 71 | 2015 |
| Effects of temperature on tensile and impact behavior of dissimilar welds of rotor steels ML Zhu, FZ Xuan Materials & Design 31 (7), 3346-3352, 2010 | 68 | 2010 |
| Effect of frequency on very high cycle fatigue behavior of a low strength Cr–Ni–Mo–V steel welded joint ML Zhu, LL Liu, FZ Xuan International Journal of Fatigue 77, 166-173, 2015 | 59 | 2015 |
| Effect of microstructure on strain hardening and strength distributions along a Cr−Ni−Mo−V steel welded joint ML Zhu, FZ Xuan Materials & Design 65, 707-715, 2015 | 59 | 2015 |
| Effect of long-term aging on microstructure and local behavior in the heat-affected zone of a Ni–Cr–Mo–V steel welded joint ML Zhu, DQ Wang, FZ Xuan materials Characterization 87, 45-61, 2014 | 56 | 2014 |
| Effect of microstructure on fatigue crack propagation behavior in a steam turbine rotor steel ML Zhu, FZ Xuan, GZ Wang Materials Science and Engineering: A 515 (1-2), 85-92, 2009 | 54 | 2009 |
| Influence of microstructure and microdefects on long-term fatigue behavior of a Cr–Mo–V steel ML Zhu, FZ Xuan, J Chen Materials Science and Engineering: A 546, 90-96, 2012 | 43 | 2012 |
| Correlation of local strain with microstructures around fusion zone of a Cr-Ni-Mo-V steel welded joint DQ Wang, ML Zhu, FZ Xuan Materials Science and Engineering: A 685, 205–212, 2017 | 42 | 2017 |
| Digital twin for integration of design-manufacturing-maintenance: An overview Y Fu, G Zhu, M Zhu, F Xuan Chinese Journal of Mechanical Engineering 35 (1), 80, 2022 | 39 | 2022 |
| In Situ Experimental Study of Near-Tip Strain Evolution of Fatigue Cracks YW Lu, C Lupton, ML Zhu, J Tong Experimental Mechanics 55 (6), 1175-1185, 2015 | 38 | 2015 |
| Failure mechanisms and design of dissimilar welds of 9% Cr and CrMoV steels up to very high cycle fatigue regime WC Zhang, ML Zhu, K Wang, FZ Xuan International Journal of Fatigue 113, 367-376, 2018 | 37 | 2018 |
| Interpreting load ratio dependence of near-threshold fatigue crack growth by a new crack closure model ML Zhu, FZ Xuan, ST Tu International Journal of Pressure Vessels and Piping 110, 9-13, 2013 | 36 | 2013 |
| Spatial Resolution and Measurement Uncertainty of Strains in Bone and Bone-Cement Interface using Digital Volume Correlation ML Zhu, QH Zhang, C Lupton, J Tong Journal of the Mechanical Behavior of Biomedical Materials 57, 269-279, 2016 | 33 | 2016 |
| Near-tip strain evolution and crack closure of growing fatigue crack under a single tensile overload R Chen, ML Zhu, FZ Xuan, SC Wu, YN Fu International Journal of Fatigue 134, 105478, 2020 | 31 | 2020 |
| Investigations on a novel cold plate achieved by topology optimization for lithium-ion batteries C Guo, H Liu, Q Guo, X Shao, M Zhu Energy 261, 125097, 2022 | 30 | 2022 |
| Observation and modeling of physically short fatigue crack closure in terms of in-situ SEM fatigue test ML Zhu, FZ Xuan, ST Tu Materials Science and Engineering: A 618, 86-95, 2014 | 28 | 2014 |
| In situ near‐tip normal strain evolution of a growing fatigue crack ML Zhu, YW Lu, C Lupton, J Tong Fatigue & Fracture of Engineering Materials & Structures 39 (8), 950-955, 2016 | 26 | 2016 |
Xuan FZProfessor of Mechanical Engineering, East China University of Science & TechnologyVerified email at ecust.edu.cn
