Influence of laser welding process parameters on weld pool geometry and duty cycle A.,P., Tadamalle, Y., P., Reddy, E., Ramjee Advances in Production Engineering & Management 8 (1), 52-58, 2013 | 57 | 2013 |
Evaluation of Nd: YAG Laser Welding Efficiencies for 304L Stainless Steel A., P., Tadamalle, Y., P., Reddy, E., Ramjee, K., V.,K., Reddy Procedia Materials Science 6, 1731-1739, 2014 | 29 | 2014 |
Optimization of laser welding process by fuzzy logic technique V., D., Bhujbal, A., P., Tadamalle International journal of engineering science and innovative technology 2 (4 …, 2013 | 11 | 2013 |
Optimization of Tractor Trolley Chassis By Using Orthogonal Array Method R., V., Patil, J., U., Marathe, A., P., Tadamalle, Y., P., Reddy Materials Today: Proceedings 4 (8), 2214-7853, 2017 | 9* | 2017 |
Influence of welding speed on the melting efficiency of Nd: YAG laser welding A., P., Tadamalle, Y., P., Reddy, E., Ramjee, V., K., Reddy Advances in Production Engineering & Management 9 (3), 128, 2014 | 8 | 2014 |
Characterization of fully and partially penetrated Nd: YAG laser-weld dissimilar metal joints A., P.,Tadamalle,Y., P., Reddy, E., Ramjee, K., V., K.,Reddy Journal of Mechanical Science and Technology 32 (2), 615-621, 2018 | 7 | 2018 |
Analysis and Optimization of Lower Control Arm. A., Kale, A., P., Tadamalle Evolutions Mech Eng 1 (1), 1-6, 2018 | 7 | 2018 |
Determination of impact absorbing capacity and toughness of aluminum honeycomb sandwich panel in bumper beam RV Patil, PR Lande, AP Tadamalle, YP Reddy Materials Today: Proceedings 4 (8), 8816-8826, 2017 | 7 | 2017 |
Review of real-time temperature measurement for process monitoring of laser conduction welding J., M., Musale, A., P., Tadamalle Eng. Sci. Technol. An Int. J 2 (5), 946-950, 2012 | 6 | 2012 |
Evaluation of Deep drawing force in sheet metal forming V., S., Vedpathak, A., P., Tadamalle, D., H., Burande International Journal of Engineering Research and Technology 8 (7), 854-859, 2019 | 5 | 2019 |
Characterization of stainless steel and galvanized iron 0.5 mm thick laser weld joints AP Tadamalle, YP Reddy, E Ramjee, KV Reddy The International Journal of Advanced Manufacturing Technology 90, 383-395, 2017 | 5 | 2017 |
Automatic Solar Tracking System N., Parasnis, A, P., Tadamalle International Journal of Innovations in Engineering Research and technology …, 2016 | 5* | 2016 |
Estimation of Weld Pool Geometry and Cooling Rate in Laser Welding Tadamalle, A., P., Reddy, Y., P., Ramjee, E., Reddy, K., V. 5th All India international conference on Manufacturing technology, Design …, 2014 | 5* | 2014 |
Thermal stress and creep analysis of failed tube of secondary super heater AN Parit, AP Tadamalle, V Ramaswamy 5th International & 26th All India Manufacturing Technology, Design and …, 2014 | 4 | 2014 |
Evaluation of Distortion and Residual Stresses in Dissimilar Metal Laser Welds A., P., Tadamalle, Y., P., Reddy, E., Ramjee, Vijayakumar, Reddy Lasers in Manufacturing and Materials Processing, 1-13, 2019 | 3* | 2019 |
Topology Optimization of lower control arm for LMV S., V., Yende, D., H., Burande, A., P., Tadamalle International Journal of Engineering Research and Technology 8 (7), 829-834, 2019 | 3* | 2019 |
A Stereo Correspondence Cost Function for FPGAs GS Joshi, AP Tadamalle International Journal of Emerging Technology and Advanced Engineering 3 (2 …, 2013 | 3 | 2013 |
Design and analysis of multi port fuel injection CNG engine manifold system KN Dadas, AP Tadamalle, TA Jadhav, VN Kapatkar, SD Lokhande Int. Res. J. Eng. Technol.(IRJET) 6 (7), 1428-1433, 2019 | 2 | 2019 |
Design and Development of a Regenerative Shok Absorber K., M., Afzal, A., P.,Tadamalle International Journal of Inovations in Engineering Rresearch and Technology …, 2016 | 2* | 2016 |
Optimization of Nd: YAG Laser Welding Process Parameters for Dissimilar Metals A., P., Tadamalle, Y., P., Reddy, E.,Ramjee IWW, international conference, 8-10, 2013 | 2 | 2013 |