Investigations on mechanical properties of aluminum hybrid composites DS Prasad, C Shoba, N Ramanaiah Journal of materials research and technology 3 (1), 79-85, 2014 | 378 | 2014 |
Mechanical and tribological properties of AA7075–TiC metal matrix composites under heat treated (T6) and cast conditions RR Veeravalli, R Nallu, SMM Mohiuddin Journal of Materials research and Technology 5 (4), 377-383, 2016 | 158 | 2016 |
Evaluation of mechanical properties of aluminium alloy (Al-2024) reinforced with molybdenum disulphide (MOS2) metal matrix composites B Rebba, N Ramanaiah Procedia Materials Science 6, 1161-1169, 2014 | 103 | 2014 |
Effect of shotpeening on sliding wear and tensile behavior of titanium implant alloys BKC Ganesh, W Sha, N Ramanaiah, A Krishnaiah Materials & Design (1980-2015) 56, 480-486, 2014 | 98 | 2014 |
Effect of reinforcement on the cutting forces while machining metal matrix composites–an experimental approach C Shoba, N Ramanaiah, DN Rao Engineering Science and Technology, an International Journal 18 (4), 658-663, 2015 | 83 | 2015 |
Tribological properties of aluminium metal matrix composites (AA7075 reinforced with titanium carbide (TiC) particles) VR Rao, N Ramanaiah, MMM Sarcar International Journal of Advanced Science and Technology 88, 13-26, 2016 | 67 | 2016 |
Partially melted zone cracking in AA6061 welds KP Rao, N Ramanaiah, N Viswanathan Materials & design 29 (1), 179-186, 2008 | 63 | 2008 |
Studies on mechanical properties of 2024 Al–B4C composites B Rebba, N Ramanaiah Advanced Materials Manufacturing & Characterization 4 (1), 42-46, 2014 | 56 | 2014 |
Dry sliding wear behavior of TiC–AA7075 metal matrix composites VR Rao, N Ramanaiah, MMM Sarcar International Journal of Applied Science and Engineering 14 (1), 27-37, 2016 | 44 | 2016 |
Fabrication and investigation on Properties of TiC reinforced Al7075 metal matrix composites V Rama Koteswara Rao, N Ramanaiah, MMM Sarcar Applied Mechanics and Materials 592, 349-353, 2014 | 43 | 2014 |
Optimization of process parameters for friction Stir welding of dissimilar Aluminum alloys (AA2024-T6 and AA6351-T6) by using Taguchi method P Krishna, N Ramanaiah, K Roa International journal of industrial engineering computations 4 (1), 71-80, 2013 | 39 | 2013 |
Influence of dislocation density on the residual stresses induced while machining Al/SiC/RHA hybrid composites C Shoba, N Ramanaiah, DN Rao Journal of Materials Research and Technology 4 (3), 273-277, 2015 | 33 | 2015 |
Dissimilar metals AISI 304 steel and AA 2219 aluminium alloy joining by friction welding method GA Rao, N Ramanaiah Materials Today: Proceedings 19, 902-907, 2019 | 29 | 2019 |
Influence of heat treatment on mechanical and corrosion properties of aluminium metal matrix composites (AA 6061 reinforced with MoS2) ES Rao, N Ramanaiah Materials Today: Proceedings 4 (10), 11270-11278, 2017 | 29 | 2017 |
Process Parameters Optimization for Producing AA6061/TiB Composites by Friction Stir Processing DR Santha, N Ramanaiah Strojnícky časopis-Journal of Mechanical Engineering 67 (1), 101-118, 2017 | 28 | 2017 |
Optimizing the machining parameters for minimum surface roughness in turning Al/6% SiC/6% RHA hybrid composites C Shoba, N Ramanaiah, DN Rao Procedia Materials Science 10, 220-229, 2015 | 28 | 2015 |
Utilization of azolla as rabbit feed. O Sreemannarayana, K Ramachandraiah, KM Sudarshan Kumar, ... | 28 | 1993 |
Optimisation of process parameters for minimum volumetric wear rate on AA7075-TiC metal matrix composite V RamakoteswaraRao, N Ramanaiah, MS Rao, MMM Sarcar, G Kartheek International Journal of Automotive and Mechanical Engineering 13 (3), 3669-3680, 2016 | 25 | 2016 |
Investigations on mechanical behaviour of B4C and MoS2 reinforced AA2024 hybrid composites B Rebba, N Ramanaiah Journal for Manufacturing Science and Production 15 (4), 339-343, 2015 | 25 | 2015 |
An experimental study on the effect of weld parameters on mechanical and micro structural properties of dissimilar aluminium alloy FS welds R Madhusudhan, MMM Sarcar, N Ramanaiah, K PrasadaRao International Journal of Modern Engineering Research (IJMER) 2 (4), 1459-1463, 2012 | 24 | 2012 |