| Dry Sliding Wear Behaviour of Al2O3 Coatings for AISI 410 Grade Stainless Steel KG Girisha, C Durga Prasad, KC Anil, KV Sreenivas Rao Applied Mechanics and Materials 766, 585-589, 2015 | 47 | 2015 |
| Effect of cutting parameters on surface finish and machinability of graphite reinforced Al-8011 matrix composite KC Anil, MG Vikas, BS Teja, KVS Rao IOP conference series: materials science and engineering 191 (1), 012025, 2017 | 36 | 2017 |
| Wear behaviour of the Ni-Cu alloy hybrid composites processed by sand mould casting J Kumaraswamy, A KC, V Shetty, C Shashishekar Advances in Materials and Processing Technologies 9 (2), 351-367, 2023 | 29 | 2023 |
| Mechanical behaviour and fractured surface analysis of bauxite residue and graphite reinforced aluminium hybrid composites KC Anil, J Kumaraswamy, M Reddy, B Prakash Frattura ed Integrità Strutturale 16 (62), 168-179, 2022 | 29 | 2022 |
| Experimental arrangement for estimation of metal-mold boundary heat flux during gravity chill casting KC Anil, J Kumaraswamy Materials Today: Proceedings, https://doi. org/10.1016/j. matpr 399, 2022 | 26 | 2022 |
| Akash KG Girisha, KC Anil Mechanical Pro–perties Of Jute And Hemp Reinforced Epoxy/Polyester, Hybrid …, 2014 | 25 | 2014 |
| Mechanical characterization of red mud reinforced Al-8011 matrix composite KV Sreenivasrao, KG Girish ARPN Journal of Engineering and Applied Sciences 11 (1), 229-234, 2016 | 23 | 2016 |
| Development of Ni-Cu based alloy hybrid composites through induction furnace casting J Kumaraswamy, KC Anil, V Shetty Materials Today: Proceedings 72, 2268-2274, 2023 | 20 | 2023 |
| Evaluation of Fracture Toughness of Red Mud Reinforced Aluminium Matrix Composite KVSR Harshavardhan R, Anil K.C Materials Today: Proceedings 5, 24854–24861, 2018 | 17 | 2018 |
| A study on effect of graphite particles on tensile, hardness and machinability of aluminium 8011 matrix material BL Shankar, KC Anil, PJ Karabasappagol IOP Conference Series: Materials Science and Engineering 149 (1), 012060, 2016 | 13 | 2016 |
| Optimization of wear behaviour of AA8011-Gr composite using Taguchi technique BL Shankar, PM Nagaraj, KC Anil Materials Today: Proceedings 4 (10), 10739-10745, 2017 | 12 | 2017 |
| Effect of particle size on mechanical properties of al-rmp metal matrix composites KVS Rao, KC Anil, KG Girisha Materials Today: Proceedings 4 (10), 11154-11157, 2017 | 10 | 2017 |
| Air Jet Erosion studies on Aluminum-Red Mud Composites using Taguchi Design. KC Anil, M Reddy, KM Mamatha Transdisciplinary Research and Education Center for Green Technologies …, 2023 | 8 | 2023 |
| Three-body abrasive wear behavior of Al-8011 alloy reinforced with graphite and red mud particulates KC Anil, S Gadge, RK Srivastva, KV Sreenivas Rao Int. J. of Science, Engineering and Management (IJSEM) 2 (2), 2017 | 8 | 2017 |
| A study on 3-body abrasive wear behaviour of aluminium 8011/graphite metal matrix composite BL Shankar, KC Anil, R Patil IOP Conference Series: Materials Science and Engineering 149 (1), 012099, 2016 | 8 | 2016 |
| Experimental investigation on erosive wear behaviour of plasma spray coated stainless steel KG Girisha, KVS Rao, KC Anil, S Sanman IOP Conference Series: Materials Science and Engineering 191 (1), 012022, 2017 | 7 | 2017 |
| Effect of fibre orientation on specific gravity, hardness, flexural strength and tensile properties of jute/hemp hybrid laminate composite A Akash, KC Anil, KG Girisha, KV Sreenivas Rao Applied Mechanics and Materials 766, 75-78, 2015 | 7 | 2015 |
| Investigating the mechanical properties of Al 7075 alloy for automotive applications: synthesis and analysis KC Anil, TR Veena, G Purushotham, S Kumar Transdisciplinary Research and Education Center for Green Technologies …, 2023 | 6 | 2023 |
| Vidyasagar Shetty and C Shashishekar. Wear behaviour of the Ni-Cu alloy hybrid composites processed by sand mold casting, Advances in Materials and Processing Technologies, Vol. 2 J Kumaraswamy, KC Anil | 6 | |
| Influence of particulates on microstructure, Mechanical and Fractured behaviour on Al-7075 alloy composite by FEA J Kumaraswamy, KC Anil, TR Veena, M Reddy, K Sunil Kumar Australian Journal of Mechanical Engineering, 1-15, 2023 | 5 | 2023 |
Dr. Kumaraswamy JAssistant Professor, Department of Mechanical Engineering, R. L. Jalappa Institute of TechnologyVerified email at rljit.in
