| Characterization of wire arc additively manufactured titanium aluminide functionally graded material: microstructure, mechanical properties and oxidation behaviour J Wang, Z Pan, Y Ma, Y Lu, C Shen, D Cuiuri, H Li Materials Science and Engineering: A 734, 110-119, 2018 | 119 | 2018 |
| Precipitates and particles coarsening of 9Cr–1.7 W–0.4 Mo–Co ferritic heat-resistant steel after isothermal aging Q Gao, Y Zhang, H Zhang, H Li, F Qu, J Han, C Lu, B Wu, Y Lu, Y Ma Scientific reports 7 (1), 5859, 2017 | 44 | 2017 |
| Innovative analysis of Luders band behaviour in X80 pipeline steel J Han, C Lu, B Wu, J Li, H Li, Y Lu, Q Gao Materials Science and Engineering: A 683, 123-128, 2017 | 34 | 2017 |
| Analysis of flow behaviour and strain partitioning mechanism of bimetal composite under hot tensile conditions Z Li, J Zhao, F Jia, Y Lu, Q Zhang, S Jiao, Z Jiang International Journal of Mechanical Sciences 169, 105317, 2020 | 26 | 2020 |
| Synergistic effects of TiC and graphene on the microstructure and tribological properties of Al2024 matrix composites F Lin, J Wang, H Wu, F Jia, Y Lu, M Ren, M Yang, Z Chen, Z Jiang Advanced Powder Technology 32 (10), 3635-3649, 2021 | 25 | 2021 |
| Influence of hot compressive parameters on flow behaviour and microstructure evolution in a commercial medium carbon micro-alloyed spring steel Y Lu, H Xie, J Wang, Z Li, F Jia, H Wu, J Han, Z Jiang Journal of Manufacturing Processes 58, 1171-1181, 2020 | 20 | 2020 |
| Fabrication of TiC-graphene dual-reinforced self-lubricating Al matrix hybrid nanocomposites with superior mechanical and tribological properties F Lin, M Ren, H Wu, Y Lu, M Huo, M Yang, Z Chen, Z Jiang Tribology International 171, 107535, 2022 | 19 | 2022 |
| Characteristic flow behaviour prediction and microstructure analysis of a commercial Si–Cr micro-alloyed spring steel under isothermal compression Y Lu, H Xie, J Wang, Z Li, F Lin, J Han, J Han, Z Jiang Vacuum 186, 110066, 2021 | 18 | 2021 |
| Hot deformation behaviour and interfacial characteristics of bimetal composite at elevated temperatures Z Li, J Zhao, F Jia, Y Lu, X Liang, X Yuan, S Jiao, C Zhou, Z Jiang Intermetallics 125, 106893, 2020 | 18 | 2020 |
| Influences of load and microstructure on tribocorrosion behaviour of high strength hull steel in saline solution H Wu, Y Li, Y Lu, Z Li, X Cheng, M Hasan, H Zhang, Z Jiang Tribology Letters 67, 1-12, 2019 | 14 | 2019 |
| The kinetics mechanism of MgB2 layer formation within MgB2 superconducting wire fabricated using improved internal Mg diffusion process Y Liu, F Cheng, Q Cai, W Qiu, Y Lu, Z Ma Journal of Alloys and Compounds 697, 37-42, 2017 | 14 | 2017 |
| Investigation of microstructure and tribological performances of high-fraction TiC/graphene reinforced self-lubricating Al matrix composites F Lin, M Ren, H Wu, F Jia, Y Lu, M Huo, M Yang, Z Chen, Z Jiang Tribology International 177, 108018, 2023 | 13 | 2023 |
| Study on deformation characteristics and microstructure evolution of 2205/ah36 bimetal composite in a novel hot forming process Z Li, H Xie, F Jia, Y Lu, X Yuan, S Jiao, Z Jiang Metals 10 (10), 1375, 2020 | 13 | 2020 |
| Strain hardening and strengthening mechanism of laser melting deposition (LMD) additively manufactured FeCoCrNiAl0. 5 high-entropy alloy L Zhu, K Geng, J Wang, D Sun, M Shan, Y Lu, X Zhang, Y Cai, J Han, ... Materials Characterization 194, 112365, 2022 | 12 | 2022 |
| Effects of inter-layer remelting frequency on the microstructure evolution and mechanical properties of equimolar CoCrFeNiMn high entropy alloys during in-situ powder-bed arc … J Wang, Y Lu, F Jia, W Xia, F Lin, J Han, R Wang, Z Pan, H Li, Z Jiang Journal of Materials Science & Technology 113, 90-104, 2022 | 11 | 2022 |
| Characterisation of microstructure, microhardness and tribological properties of Al matrix hybrid nanocomposites reinforced with B4C and in-situ GNSs F Lin, M Ren, H Wu, Y Lu, M Yang, Z Chen, Z Jiang Wear 522, 204691, 2023 | 9 | 2023 |
| Additive manufacturing of a functionally graded high entropy alloy using a hybrid powder-bed wire-based direct energy deposition approach Y Lu, J Wang, S Williams, L Zhu, J Ding, C Diao, Z Jiang Additive Manufacturing 63, 103424, 2023 | 9 | 2023 |
| Improvement in the transport critical current density and microstructure of isotopic Mg11B2 monofilament wires by optimizing the sintering temperature W Qiu, H Jie, D Patel, Y Lu, V Luzin, A Devred, M Somer, M Shahabuddin, ... Scientific Reports 6 (1), 36660, 2016 | 9 | 2016 |
| A novel Ti/Al interpenetrating phase composite with enhanced mechanical properties Z Li, H Mo, J Tian, J Li, X Hu, S Xia, Y Lu, Z Jiang Materials Letters 357, 135723, 2024 | 7 | 2024 |
| Simulation, microstructure and austenite reconstruction of a medium carbon micro-alloyed steel subjected to an austenitising bending process Y Lu, H Xie, J Wang, F Jia, Z Li, F Lin, D Pan, J Han, Z Jiang Materials Letters 305, 130772, 2021 | 6 | 2021 |
Zhengyi JiangUniversity of WollongongVerified email at uow.edu.au
