| Parametric effects of single point incremental forming on hardness of AA1100 aluminium alloy sheets SM Najm, I Paniti, T Trzepieciński, SA Nama, ZJ Viharos, A Jacso Materials 14 (23), 7263, 2021 | 28 | 2021 |
| Predication of Forming Limit Diagram and Spring-back during SPIF process of AA1050 and DC04 Sheet Metals MT Mezher, OS Barrak, SA Nama, RA Shakir Journal of Mechanical Engineering Research and Developments 44 (1), 337-345, 2021 | 15 | 2021 |
| The influence of nano particles additive on tribological properties of aa2024-t4 coated with tin or sin thin films NSM Namer, SA Nama, MT Mezher J. Mech. Eng. Res. Dev 42, 30-34, 2019 | 13 | 2019 |
| NUMERICAL AND EXPERIMENTAL INVESTIGATION OF USING LUBRICANT WITH NANO POWDER ADDITIVES IN SPIF PROCESS MT Mezher, NSM Namer, SA Nama International Journal of Mechanical Engineering and Technology (IJMET) 9 (13 …, 2018 | 13 | 2018 |
| The effect of using grease on the surface roughness of aluminum 1100 sheet during the single point incremental forming process SA Nama, NSM Namer, SM Najm Trends Mach. Des 1, 53-56, 2014 | 9 | 2014 |
| MODELING AND ANALYSIS OF A HELICAL MACHINED SPRINGS SA Nama The Iraqi Journal for Mechanical and Materials Engineering 15 (2), 152-163, 2015 | 8 | 2015 |
| Influence of Lubricant Viscosity on the Surface Roughness of PEHD and PVC Plastic Sheets in Single Point Incremental Forming Process MTM Nasri S. Namer , Sami Ali Nama International Journal of Engineering and Applied Sciences 7 (2), 27-30, 2015 | 7 | 2015 |
| Effect of infill percentage for 3D printed dies on spring back for aluminum sheets FE Nouman, SA Nama, HH Mahdi International Journal on Technical and Physical Problems of Engineering 13 …, 2021 | 6 | 2021 |
| Effect of Pitch Angle on Static Characteristics of a Helical Machined Spring SA Nama The Iraqi Journal for Mechanical and Materials Engineering 15 (3), 181-190, 2015 | 5 | 2015 |
| Effect of Pre-hole Diameter on Bushing Dimensions for Friction Drilling Process of A6063-T6 Aluminum Alloy ITA Sami Ali Nama , Nassri S. Namer Journal of Al Rafidain University College, 373-387, 2016 | 4* | 2016 |
| Bending titanium sheets with 3D-printed PETG tools WH Hanoon, NSM Namer, SA Nama Revue des Composites et des Materiaux Avances 32 (1), 39, 2022 | 3 | 2022 |
| Numerical Study for Vibration Analysis of Hole Flanged Rectangular Plate SANSM Khazaal IOP Conference Series: Materials Science and Engineering 518 (3), 2019 | 3 | 2019 |
| Investigating the Effect of Embossing and Restoration Process on The Natural Frequency of Rectangular Plate SA Nama, SM Khazaal Journal of Mechanical Engineering Research & Developments 44 (1), 75-82, 2020 | 2 | 2020 |
| Holeclinching joint of polymer to titanium sheets, experimental and numerical analysis LS Jameel, NSM Namer, SA Nama Journal of Mechanical Engineering Research and Development 44 (3), 242-250, 2021 | 1 | 2021 |
| Free Vibration of Rectangular Plates with Flanged Obround Opening SA Nama Journal of Mechanical Engineering Research & Developments 44 (1), 223-231, 2021 | 1 | 2021 |
| Numerical and Experimental Investigation of The Dimpling Process for Aluminum Alloy SM Khazaal, SA Nama Journal of Mechanical Engineering Research & Developments 44 (1), 215-222, 2021 | 1 | 2021 |
| Experimental and Numerical Investigation on the Free Vibration Characteristics of 3D Printed Springs with Square Cross Sections. HH Mahdi, SA Nama, S Mustafa Mathematical Modelling of Engineering Problems 10 (6), 2023 | | 2023 |
| Effect of Graphite & TiO2 as a Lubricant additive in Single Point Incremental Forming on Titanium G2 Sheets IN ABDULHASAN, NSM NIMER, SALI NAMA The Second Engineering Conference for Graduate Research Middle Technical …, 2017 | | 2017 |
| Numerical and Experimental Study on Deep Drawing Process for AA2024-T4Sheet JWT Nasri S. M. Namer , Sami Ali Nama مجلة اتحاد الجامعات العربية للدراسات والبحوث الهندسية 23 (2), 113-123, 2016 | | 2016 |
| INFLUENCE OF FORGING PROCESS ON THE MECHANICAL BEHAVIOR OF (AL/SIC) AND (AL/SIC/CU)-MMC’S PRODUCED BY P/M COMPACTS ZK Ibrahim, SN Ali, NSM Nemer Journal of Techniques 28 (1), 2015 | | 2015 |
