| Experimental and analytical study of ultrasonic elliptical vibration cutting on AISI 1045 for sustainable machining of round-shaped microgroove pattern R Kurniawan, ST Kumaran, S Ali, DA Nurcahyaningsih, G Kiswanto, TJ Ko The International Journal of Advanced Manufacturing Technology 98, 2031-2055, 2018 | 45 | 2018 |
| Development of a three-dimensional ultrasonic elliptical vibration transducer (3D-UEVT) based on sandwiched piezoelectric actuator for micro-grooving R Kurniawan, S Ali, KM Park, CP Li, TJ Ko International journal of precision engineering and manufacturing 20, 1229-1240, 2019 | 27 | 2019 |
| Development of 3D resonant elliptical vibration transducer for dual-frequency micro-dimple surface texturing S Ali, R Kurniawan, TJ Ko International Journal of Precision Engineering and Manufacturing 22 (8 …, 2021 | 15 | 2021 |
| Measurement of wettability on rhombohedral pattern fabricated by using 3D-UEVT R Kurniawan, S Ali, TJ Ko Measurement 160, 107784, 2020 | 14 | 2020 |
| Development of cryogenic assisted machining strategy to reduce the burr formation during micro-milling of ductile material F Ahmed, F Ahmad, ST Kumaran, M Danish, R Kurniawan, S Ali Journal of Manufacturing Processes 85, 43-51, 2023 | 13 | 2023 |
| Experimental study of microgroove surface using three-dimensional elliptical vibration texturing R Kurniawan, S Ali, KM Park, ST Jung, TJ Ko Journal of Micro-and Nano-Manufacturing 7 (2), 024502, 2019 | 12 | 2019 |
| Analysis of the influence of input parameters of EDM on material removal rate and surface roughness for machining stainless steel 304 F Ahmed, TJ Ko, S Ali International Journal of Machining and Machinability of Materials 20 (1), 78-89, 2018 | 12 | 2018 |
| Analytical, FEA, and experimental research of 2D-Vibration Assisted Cutting (2D-VAC) in titanium alloy Ti6Al4V R Kurniawan, F Ahmed, S Ali, GC Park, TJ Ko The International Journal of Advanced Manufacturing Technology 117 (5), 1739 …, 2021 | 11 | 2021 |
| Tribological properties of hierarchical micro-dimples produced on a cylindrical surface by dual-frequency texturing S Ali, R Kurniawan, PG Chul, TJ Ko Friction 11 (2), 246-258, 2023 | 9 | 2023 |
| Modal simulation analysis of novel 3D elliptical ultrasonic transducer R Kurniawan, S Ali, TJ Ko IOP Conference Series: Materials Science and Engineering 324 (1), 012063, 2018 | 7 | 2018 |
| Effect of micro-dimple geometry on the tribological characteristics of textured surfaces S Ali, R Kurniawan, M Xu, F Ahmed, M Danish, K Aslantas Lubricants 10 (12), 328, 2022 | 5 | 2022 |
| Characterization of Elliptical Dimple Fabricated with Dual Frequency Vibration Assisted Machining GC Park, TJ Ko, R Kurniawan, S Ali Journal of the Korean Society of Manufacturing Process Engineers 20 (2), 23-31, 2021 | 5 | 2021 |
| Evaluation of tribological characteristics for HVOF deposited Ni based self-lubricating coatings with different h-BN composition RKS Gautam, R Tyagi, S Singh, S Ali, S Kumar, H Nautiyal Surface and Coatings Technology 464, 129549, 2023 | 3 | 2023 |
| Enhancement of machinability study in longitudinal ultrasonic vibration-assisted milling Inconel 718 using high-frequency-vibration spindle M Xu, S Chen, R Kurniawan, C Li, Y In Kwak, S Ali, MK Choo, PW Han, ... The International Journal of Advanced Manufacturing Technology 126 (7), 3523 …, 2023 | 3 | 2023 |
| Ultrasonic and electrical discharge–assisted milling of the Ti-6Al-4 V alloy M Xu, C Li, R Kurniawan, C Jielin, YI Kwak, S Ali, MK Choo, TJ Ko The International Journal of Advanced Manufacturing Technology 122 (3), 1897 …, 2022 | 3 | 2022 |
| Analyzing Friction Coefficient and Wettability of Micro-Dimple Fabricated Using Elliptical Vibration Texturing Method GC Park, TJ Ko, R Kurniawan, S Ali Journal of the Korean Society of Manufacturing Process Engineers 19 (5), 38-44, 2020 | 3 | 2020 |
| FE simulation, analytical prediction, and experimentation of cutting force in longitudinal vibration-assisted milling (LVAM) during Ti-6Al-4 V cutting R Kurniawan, TJ Ko, PW Han, M Xu, J Chen, YI Kwak, S Ali The International Journal of Advanced Manufacturing Technology 126 (3), 1417 …, 2023 | 2 | 2023 |
| Effect of burrs on the friction performance of hierarchical micro-dimple textured AISI 1045 steel GC Park, S Ali, R Kurniawan, TJ Ko Journal of Mechanical Science and Technology 35, 5631-5642, 2021 | 2 | 2021 |
| Effect of machining Parameters on Micro-Dimple Characteristics in Dual-Frequency 3D Elliptical Resonant Vibration Surface Texturing S Ali, P Geoncheol, R Kurniawan, TJ Ko 한국기계가공학회 춘추계학술대회 논문집, 118-118, 2019 | 2 | 2019 |
| Characterization and Heat Transfer Assessment of CuO-Based Nanofluid Prepared through a Green Synthesis Process SK Shanmugam, A Arivendan, S Govindan Selvamani, T Dheivasigamani, ... Ceramics 6 (4), 1926-1936, 2023 | 1 | 2023 |
Rendi KurniawanDepartment of Mechanical Engineering, Faculty of Engineering, Universitas Indonesia, www.ui.ac.idVerified email at eng.ui.ac.id
