Effect of homogenization and solution treatments time on the elevated-temperature mechanical behavior of Inconel 718 fabricated by laser powder bed fusion EM Fayed, M Saadati, D Shahriari, V Brailovski, M Jahazi, M Medraj Scientific Reports 11 (1), 2020, 2021 | 59 | 2021 |
Influence of homogenization and solution treatments time on the microstructure and hardness of Inconel 718 fabricated by laser powder bed fusion process EM Fayed, D Shahriari, M Saadati, V Brailovski, M Jahazi, M Medraj Materials 13 (11), 2574, 2020 | 51 | 2020 |
Cold spray deposition characteristic and bonding of CrMnCoFeNi high entropy alloy R Nikbakht, M Saadati, TS Kim, M Jahazi, HS Kim, B Jodoin Surface and Coatings Technology 425, 127748, 2021 | 36 | 2021 |
On the hot cracking of HSLA steel welds: Role of epitaxial growth and HAZ grain size M Saadati, AKE Nobarzad, M Jahazi Journal of Manufacturing Processes 41, 242-251, 2019 | 27 | 2019 |
Twin-assisted precipitation during hot compression of an Mg-Gd-Zn-Zr magnesium alloy M Saadati, RA Khosroshahi, G Ebrahimi, M Jahazi Materials Science and Engineering: A 706, 142-152, 2017 | 24 | 2017 |
Cold spray deformation and deposition of blended feedstock powders not necessarily obey the rule of mixture R Nikbakht, H Assadi, K Jahani, M Saadati, B Jodoin Surface and Coatings Technology 424, 127644, 2021 | 23 | 2021 |
Optimization of the post-process heat treatment of Inconel 718 superalloy fabricated by laser powder bed fusion process EM Fayed, M Saadati, D Shahriari, V Brailovski, M Jahazi, M Medraj Metals 11 (1), 144, 2021 | 19 | 2021 |
Dynamic microstructure evolution in cold sprayed NiTi composite coatings R Nikbakht, M Saadati, H Assadi, K Jahani, B Jodoin Surface and Coatings Technology 421, 127456, 2021 | 15 | 2021 |
Formation of precipitates in parallel arrays on LPSO structures during hot deformation of GZ41K magnesium alloy M Saadati, RA Khosroshahi, G Ebrahimi, M Jahazi Materials Characterization 131, 234-243, 2017 | 11 | 2017 |
EBSD Analysis Enhancement of Cold Sprayed Composite Materials: Sample Preparation, Annealing, and Scan Optimization R Nikhbakht, M Saadati, M Jahazi, H Assadi, B Jodoin | 7 | 2020 |
Influence of initial microstructure on hot deformation behavior of duplex stainless steels M Pooyamanesh, B Eghbali, GR Ebrahimi, M Saadati Journal of Advanced Materials and Processing 1 (2), 61-67, 2012 | 3 | 2012 |
A COMPARISON BETWEEN HOT DEFORMATION BEHAVIOR OF TWO AS-CAST DUPLEX STAINLESS STEELS M POOYAMANESH, B EGHBALI, GHR EBRAHIMI, M SAADATI JOURNAL OF NEW MATERIALS 1 (2), 49-54, 2011 | | 2011 |