Additive manufacturing post-processing treatments, a review with emphasis on mechanical characteristics A Diniță, A Neacșa, AI Portoacă, M Tănase, CN Ilinca, IN Ramadan Materials 16 (13), 4610, 2023 | 24 | 2023 |
Optimization of 3D printing parameters for enhanced surface quality and wear resistance AI Portoacă, RG Ripeanu, A Diniță, M Tănase Polymers 15 (16), 3419, 2023 | 13 | 2023 |
Innovative Strategies for Technical-Economical Optimization of FDM Production DG Zisopol, M Tănase, AI Portoacă Polymers 15 (18), 3787, 2023 | 7 | 2023 |
Experimental Study Regarding the Influence of Welding Parameters on the Mechanical Behavior of High Density Polyethylene Pipes I RAMADAN, M TANASE Materiale plastice 57 (4), 2020 | 7 | 2020 |
Buckling analysis of a thin-walled cylindrical shell strengthened by fiber-reinforced polymers G Lvov, A Pupazescu, D Beschetnikov, M Zaharia Materiale Plastice 52 (1), 28-31, 2015 | 7 | 2015 |
Dimensional Accuracy of 3D Printed Dog-bone Tensile Samples: A Case Study DG Zisopol, AI Portoaca, M Tanase Engineering, Technology & Applied Science Research 13 (4), 11400-11405, 2023 | 6 | 2023 |
Energy in the Era of Industry 5.0—Opportunities and Risks MT Marius Gabriel Petrescu, Adrian Neacșa, Eugen Laudacescu Industry 5.0, 71-90, 2023 | 6* | 2023 |
Experimental Research on the Wear Behavior of Materials Used in the Manufacture of Components for Cement Concrete Mixers A Niță, MG Petrescu, T Dumitru, A Burlacu, M Tănase, E Laudacescu, ... Materials 16 (6), 2326, 2023 | 5 | 2023 |
A Study regarding the Technical-Economical Optimization of Structural Components for enhancing the Buckling Resistance in Stiffened Cylindrical Shells M Tanase, DG Zisopol, AI Portoaca Engineering, Technology & Applied Science Research 13 (5), 11511-11516, 2023 | 4 | 2023 |
Improving the Impact Resistance through Annealing in PLA 3D Printed Parts DG Zisopol, AI Portoaca, M Tanase Engineering, Technology & Applied Science Research 13 (5), 11768-11772, 2023 | 4 | 2023 |
Influence of technological parameters on the behaviour in operation of the asphalt milling equipment T Dumitru, C Ilincă, M Tănase IOP Conference Series: Materials Science and Engineering 1262 (1), 012018, 2022 | 4 | 2022 |
Optimizing the trajectory of aggregates in drying units from the asphalt plants CIMGP A I Burlacu, M Tănase IOP Conference Series: Materials Science and Engineering, 2022 | 4 | 2022 |
Advancements in Fiber-Reinforced Polymer Composites: A Comprehensive Analysis A Diniță, RG Ripeanu, CN Ilincă, D Cursaru, D Matei, RI Naim, M Tănase, ... Polymers 16 (1), 2, 2023 | 2 | 2023 |
Multi-Response Optimization Analysis of the Milling Process of Asphalt Layer Based on the Numerical Evaluation of Cutting Regime Parameters T Dumitru, MG Petrescu, M Tănase, CN Ilincă Processes 11 (8), 2401, 2023 | 2 | 2023 |
Experimental Research Regarding the Effect of Mineral Aggregates on the Wear of Mixing Blades of Concrete Mixers A Niță, E Laudacescu, MG Petrescu, T Dumitru, A Burlacu, DG Bădoiu, ... Materials 16 (14), 5047, 2023 | 2 | 2023 |
Numerical Approach Regarding the Effect of the Flight Shape on the Performance of Rotary Dryers from Asphalt Plants A Burlacu, MG Petrescu, T Dumitru, A Niță, M Tănase, E Laudacescu, ... Processes 10 (11), 2339, 2022 | 2 | 2022 |
Comparative study concerning the methods of calculation of the critical axial buckling load for stiffened cylindrical shells M Zaharia, A Pupazescu, CM Petre Revista de Chimie 69 (8), 2000-2004, 2018 | 2 | 2018 |
The Application of Tribological Tests to Study the Wear Behavior of Asphalt Cutter Teeth: An Experimental Investigation Using Baroid Tribometer T Dumitru, MG Petrescu, M Tănase, E Laudacescu Coatings 13 (7), 1251, 2023 | 1 | 2023 |
Reliability of manufacturing technologies MG Petrescu, C Ilincă, M Tănase Innovation and Sustainable Manufacturing, 29-65, 2023 | 1 | 2023 |
Analytical and numerical assessment of buckling strength of silos with corrugated walls under uniform external pressure C Ilincă, M Tănase Asian Journal of Civil Engineering 23 (2), 289-298, 2022 | 1 | 2022 |