The design of an intelligent mechanical active prosthetic knee R Borjian, J Lim, MB Khamesee, W Melek 2008 34th Annual Conference of IEEE Industrial Electronics, 3016-3021, 2008 | 40 | 2008 |
Time-optimal trajectory generation for 5-axis on-the-fly laser drilling K Erkorkmaz, A Alzaydi, A Elfizy, S Engin CIRP annals 60 (1), 411-414, 2011 | 35 | 2011 |
Hydraulic actuator modeling for optimization of mechatronic and adaptronic systems O Gomis-Bellmunt, F Campanile, S Galceran-Arellano, ... Mechatronics 18 (10), 634-640, 2008 | 24 | 2008 |
Active prosthetic knee fuzzy logic-PID motion control, sensors and test platform design AA Alzaydi, A Cheung, N Joshi, S Wong International Journal of Scientific & Engineering Research 2 (12), 1-17, 2011 | 21 | 2011 |
Environmental dust repelling from hydrophilic/hydrophobic surfaces under sonic excitations AA Abubakar, BS Yilbas, H Al-Qahtani, A Alzaydi Scientific reports 10 (1), 19348, 2020 | 14 | 2020 |
Time-optimized hole sequence planning for 5-axis on-the-fly laser drilling K Erkorkmaz, A Alzaydi, A Elfizy, S Engin CIRP annals 63 (1), 377-380, 2014 | 14 | 2014 |
Demand, practices and properties of compost in the western region of the Kingdom of Saudi Arabia A Alzaydi, S Alsolaimani, M Ramadan Australian Journal of Basic and Applied Sciences, 7 (7), 2013 | 13 | 2013 |
Hydraulic controlled polyester-based micro adaptive mirror with adjustable focal length AA Alzaydi, J Yeow, S Lee Mechatronics 18 (2), 61-70, 2008 | 13 | 2008 |
Time-optimal, minimum-jerk, and acceleration continuous looping and stitching trajectory generation for 5-axis on-the-fly laser drilling A Alzaydi Mechanical systems and signal processing 121, 532-550, 2019 | 11 | 2019 |
Time-Optimal Trajectory Generation and Way-Point Sequencing for 5-Axis Laser Drilling A Alzaydi University of Waterloo, 2016 | 6 | 2016 |
Trajectory generation and optimization for five-axis on-the-fly laser drilling: a state-of-the-art review A Alzaydi Optical Engineering 57 (12), 120901-120901, 2018 | 5 | 2018 |
Recycling potential of construction and demolition waste in GCC countries A Alzaydi Scientific Forum in the Recycling of Municipal Solid Waste. The Centre of …, 2014 | 4 | 2014 |
Time-Optimal Trajectory Generation for Laser Drilling A Alzaydi | 4 | 2011 |
Time optimal trajectory generation for 5-axis on-the-fly drilling A Alzaydi MA Sc Thesis University of Waterloo, Waterloo, Ontario, 2011 | 4 | 2011 |
Droplet motion on sonically excited hydrophobic meshes AA Abubakar, BS Yilbas, H Al-Qahtani, A Alzaydi Scientific Reports 12 (1), 6759, 2022 | 3 | 2022 |
Time-Optimal Trajectory Generation for 5-Axis On-the-Fly Laser Drilling A Alzaydi University of Waterloo, 2011 | 3* | 2011 |
Water droplet behavior in between hydrophilic and hydrophobic surfaces and dust mitigation BS Yilbas, AA Abubakar, JE Adukwu, G Hassan, H Al-Qahtani, ... RSC advances 12 (44), 28788-28799, 2022 | 2 | 2022 |
Task-Point Sequencing and Trajectory Generation/Optimization with Benchmarking for Multi-axis Percussion Laser Drilling of Jet Engine Combustion Chamber Panels A Alzaydi Arabian Journal for Science and Engineering 45 (8), 6923-6947, 2020 | 2 | 2020 |
Robotic manipulator task sequencing and minimum snap trajectory generation A Alzaydi, M Sahaluddin, M Islam, S Al-Helou Arabian Journal for Science and Engineering 45, 6865-6886, 2020 | 2 | 2020 |
Time-optimal connection between on-the-fly drilling trajectories and rest boundary conditions A Alzaydi Arabian Journal for Science and Engineering 44 (12), 10181-10194, 2019 | 2 | 2019 |