| SiC cantilever resonators with electrothermal actuation L Jiang, R Cheung, J Hedley, M Hassan, AJ Harris, JS Burdess, ... Sensors and Actuators A: Physical 128 (2), 376-386, 2006 | 79 | 2006 |
| Fabrication of SiC microelectromechanical systems using one-step dry etching L Jiang, R Cheung, M Hassan, AJ Harris, JS Burdess, CA Zorman, ... Journal of Vacuum Science & Technology B: Microelectronics and Nanometer …, 2003 | 64 | 2003 |
| Mechanical properties of a 3C-SiC film between room temperature and 600 C M Pozzi, M Hassan, AJ Harris, JS Burdess, L Jiang, KK Lee, R Cheung, ... Journal of Physics D: Applied Physics 40 (11), 3335, 2007 | 41 | 2007 |
| Voice-based control of a DC servo motor M Hassan, H Mahjoub, M Obed American Journal of Engineering and Applied Sciences 5 (1), 2012 | 29 | 2012 |
| Dry release fabrication and testing of SiC electrostatic cantilever actuators L Jiang, M Hassan, R Cheung, AJ Harris, JS Burdess, CA Zorman, ... Microelectronic Engineering 78, 106-111, 2005 | 25 | 2005 |
| A low-stress and low temperature gradient microgripper for biomedical applications E Gaafar, M Zarog, IEEE Senior Member Microsystem Technologies 23, 5415-5422, 2017 | 24 | 2017 |
| Optimized V-shaped beam micro-electrothermal actuator using particle swarm optimization (PSO) technique SE Osman, M Zarog Micro and Nanosystems 11 (1), 62-67, 2019 | 9 | 2019 |
| Materials investigation for lower limb Prosthetic socket M Ahmed, M Abd-alrahman, M Abdallah, M Zarog International Journal of Mechanical and Industrial Technology 6 (1), 18-22, 2018 | 8 | 2018 |
| Pt/3C-SiC electrothermal cantilever for MEMS-based mixers M Hassan Microsystem technologies 17 (3), 425-428, 2011 | 8 | 2011 |
| Electrostatically actuated 3C-SiC MEMS for frequency mixing M Hassan Journal of Mechatronics 1 (1), 21-24, 2012 | 6 | 2012 |
| Thermal analysis of electrostatic micro actuator A Abdallah, A Ishag, SED Osman, M Yousif, M Hassan International Journal of Mechatronics, Electrical and Computer Technology 4 (10), 2014 | 4 | 2014 |
| Using look-up tables to model an electromagnetic suspension system M Hassan American Journal of Applied Sciences 9 (8), 1199, 2012 | 4 | 2012 |
| Piezoelectric ceramic for energy harvesting from ambient vibration M Zarog Energetika 67 (1-2), 2021 | 3 | 2021 |
| Determination of residual stresses in a single crystalline 3C-SiC micro-fabricated structure using FE model and measured resonance frequencies M Hassan Microsystem technologies 18 (3), 319-324, 2012 | 3 | 2012 |
| Modelling Electromagnetic Suspension Force Using Measured Inductance-Airgap Data M Hassan Electrical and Electronic Engineering 2 (2), 64-67, 2012 | 3 | 2012 |
| Electronic cough monitor M Hassan, A Satti, A Hussien, T Tag El-Din American Journal of Biomedical Engineering, 2012 | 3 | 2012 |
| The effect of the electrode position on the dynamic behavior of an electrostatically actuated microcantilever MA Eshag, M Zarog Acta Universitatis Sapientiae, Electrical and Mechanical Engineering 11 (1 …, 2019 | 2 | 2019 |
| A CAD model of DC-contact MEMS series switch A Obeid, M Hassan Int J Mechatron Electr Comput Technol 4 (11), 610-615, 2014 | 2 | 2014 |
| Application of fuzzy logic in evaluating the authenticity of hadith and narrators M Zarog International Journal of Reasoning-based Intelligent Systems 15 (2), 156-164, 2023 | 1 | 2023 |
| A Pilot Study for Evaluating Economic and Societal Impact of Engineering Research: A Pilot Study for Evaluating Economic and Societal Impact of Engineering Research M Zarog Journal of Arts and Social Sciences [JASS] 11 (3), 5-16, 2020 | 1 | 2020 |
