Follow
Dr.Ahmed AYASH
Dr.Ahmed AYASH
Assistant Professor of Chemical Engineering, Mustansiriyah University, Materials Eng. Dept.
Verified email at uomustansiriyah.edu.iq
Title
Cited by
Cited by
Year
CO2 absorption using diethanolamine-water solutions in a rotating spiral contactor
JM MacInnes, AA Ayash, GRM Dowson
Chemical Engineering Journal 307, 1084-1091, 2017
272017
Mass transfer characteristics of rotating spiral gas-liquid contacting
JM MacInnes, AA Ayash
Chemical Engineering Science 175, 320-334, 2018
102018
Effect of NCO/OH on the Mechanical properties of Polyurethane Elastomers
MM Mohammed, MM ALJarrah, AAA Lateef
Al-Nahrain Journal for Engineering Sciences 11 (3), 485-493, 2008
82008
An investigation of flaxseed effect on the mechanical behaviour of cement mortar
AA Ayash, RM Raouf, YK Ibrahim
Materials Today: Proceedings 42, 2616-2620, 2021
52021
Analysis of Circulating Tumour Cells Separation in a Curved Microchannel under a High Gravitational Field
AA Ayash
Chemical Engineering Science, 118235, 2022
42022
2-D parametric analysis of gas- liquid contacting in a spinning spiral contactor
AA Ayash
FFHMT 19, 2019
42019
Mass transfer prediction of gas-liquid contacting in a rotating spiral channel
AA Ayash, JM MacInnes
International Conference on Fluid Flow, Heat and Mass Transfer,(August), 2017
32017
Analysis and Simulation of Blood Cells Separation in a Polymeric Serpentine Microchannel under Dielectrophoresis Effect
AA Ayash, HH Al-Moameri, AA Salman, AA Lubguban, RM Malaluan
Sustainability 15 (4), 3444, 2023
22023
Conventional and non-conventional gas-liquid contacting methods: A critical review and a quantitative evaluation
AA Ayash, MA Mahmood
AIP Conference Proceedings 2660, 2022
22022
Counter-current gas-liquid contacting in a Rotating Spiral Channel: Experimental and Theoretical Study
A Ayash
University of Sheffield, 2018
22018
Simulation Study of the Liquid–Solid Multistage Adsorption Process
HH Al-Moameri, AA Ayash, SZA Al-Najjar, AA Lubguban, RM Malaluan
Sustainability 15 (4), 3345, 2023
12023
Mechanical Characteristics of Asphalt Mixture Modified by Polypropylene Waste
AA Ayash, RM Raouf, KM Eweed
Defect and Diffusion Forum 398, 90-97, 2020
12020
Evaluation the influence of cesium 137 source on some physical properties and molecular weight of poly vinyl acetate at room temperature
RM Raouf, BJ Nabhan, AA Ayash
Materials Today: Proceedings 20, 478-481, 2020
12020
A NEW CORRELATION FOR SPECIFIC HEAT OF NORMAL ALKANES (C1-C30) AS A FUNCTION OF TEMPERATURE AND CARBON NUMBER
AAH Ayash
Journal of Engineering and Sustainable Development 23 (3), 166-174, 2019
12019
Proposed Method for Calculating Void Fraction and Flow Pattern of Unsteady-State Homogenous Approach of Two-Phase Flow in Vertical Oil Extraction Pipe
MA Khalid, TWM Salih, AA Ayash
Journal of Babylon University/Engineering Sciences, 197-207, 2013
12013
Limits of Performance of Polyurethane Blowing Agents
L Jaf, HH Al-Moameri, AA Ayash, AA Lubguban, RM Malaluan, T Ghosh
Sustainability 15 (8), 6737, 2023
2023
Simulation Study of the Liquid-Solid Multistage Adsorption Process. Sustainability 2023, 15, 3345
HH Al-Moameri, AA Ayash, SZA Al-Najjar, AA Lubguban, RM Malaluan
2023
THERMAL AND MECHANICAL BEHAVIOR OF FIBRE-REINFORCED EPOXY CONTAINING LOW CONTENT OF NANO-CuO PARTICLES
AA Ayash
polymer 1, 8, 2023
2023
Biochar filler for the production of conductive bio-epoxy composites
MA Mahmood, AA Ayash, KM Eweed
AIP Conference Proceedings 2660 (1), 2022
2022
STUDYING THE EFFECT OF DIFFERENT ADDITIVES ON THE THERMAL CONDUCTIVITY AND MECHANICAL CHARACTERISTICS OF EPOXY-BASED COMPOSITE MATERIALS
HM Nhoo, RM Fenjan, AA Ayash
Journal of Engineering and Sustainable Development (JEASD), 2021
2021
The system can't perform the operation now. Try again later.
Articles 1–20