Crack detection in beams using experimental modal data and finite element model H Nahvi, M Jabbari International Journal of Mechanical Sciences 47 (10), 1477-1497, 2005 | 332 | 2005 |
Effects of TiO2/SiC/SiO2 coating on graphite electrode consumption in sublimation and oxidation states as determined by EAF simulation and experimental methods HA Moghadam, M Jabbari, S Daneshmand, SR Jazi, A Khosravi Surface and Coatings Technology 420, 127340, 2021 | 10 | 2021 |
Energy harvesting of a multilayer piezoelectric beam in resonance and off-resonance cases M Jabbari, M Ghayour, HR Mirdamadi Journal of Engineering Materials and Technology 139 (3), 031008, 2017 | 9 | 2017 |
Experimental and numerical results of dynamics behavior of a nonlinear piezoelectric beam M Jabbari, M Ghayour, HR Mirdamadi Mechanics of Advanced Materials and Structures 23 (8), 853-864, 2016 | 9 | 2016 |
The effect of strain nodes on the energy harvesting of the cantilever piezoelectric beam with the vibration mode excitation M Jabbari Modares Mechanical Engineering 17 (10), 65-72, 2018 | 8 | 2018 |
Investigation of the TiO2/SiC/SiO2 Coating Effect On the Wear Rate of Needle Graphite Electrode by using Electrical Discharge Machining. HA Moghadam, M Jabbari, S Daneshmand, SR Jazi, A Khosravi International Journal of Advanced Design & Manufacturing Technology 14 (2), 2021 | 2 | 2021 |
Increasing the performance of energy harvesting in vibration mode shapes M Jabbari, M Ghayour, HR Mirdamadi Adv. Comput. Des 1 (2), 155-173, 2016 | 2 | 2016 |
Dynamics analysis of the steady and transient states of a nonlinear piezoelectric beam by a finite element method M Jabbari, M Ghayour, HR Mirdamadi JOURNAL OF SOLID MECHANICS 8 (2), 247-261, 2016 | 2 | 2016 |
FABRICATION OF PROTECTIVE SiC/TiO2/SiO2 COATING FOR GRAPHITE ELECTRODES HA Moghadam, M Jabbari, S Daneshmand, SR Jazi, A Khosravi Surface Review and Letters 28 (05), 2150038, 2021 | 1 | 2021 |
Increasing the electric power harvesting from the piezoelectric micro beam by the genetic algorithm method by optimizing the geometrical shape and material M Eghdami, M Jabbari Aerospace Knowledge and Technology Journal 11 (2), 165-181, 2023 | | 2023 |
Stabilized crack-opening stresses as a function of R-ratios and stress levels R Chermahini, M Jabbari Journal of Simulation and Analysis of Novel Technologies in Mechanical …, 2022 | | 2022 |
The Electric Response of Piezoelectric Beam Using Dynamic Stiffness Method M Jabbari, B Ahmadi Journal of Applied and Computational Sciences in Mechanics 31 (2), 2020 | | 2020 |
The Effect of Polyurethane Mandrels and NBR in the Bending Process of Steel Pipe with using the Numerical Simulation and Experimental Test SA Poursayed Rezaee, M Jabbari Journal of Mechanical Engineering and Vibration 10 (3), 13-21, 2019 | | 2019 |
Effect of Dynamic Parameters and Fluid Impurities on Abrasion of Centrifugal Compressor Impeller of the Gas Transmission Center using Experimental and Analytical Methods H Keshaverzian, M Jabbari, M Soheili Modares Mechanical Engineering 19 (11), 2645-2651, 2019 | | 2019 |
Electric Response of Piezoelectric Nonlinear Beam with the Harmonic Base Excitation and Change Concentrated Mass M Jabbari Modares Mechanical Engineering 19 (2), 467-474, 2019 | | 2019 |
تاثیر گرههای کرنشی در برداشت انرژی تیر پیزوالکتریک با تحریک مودهای ارتعاشی جباری مهندسی مکانیک مدرس 17 (10), 65-72, 2018 | | 2018 |
Fatigue crack growth and closure behaviour under multiaxial loading RG Chermahini, M Jabbari Procedia Engineering 2 (1), 2021-2026, 2010 | | 2010 |
CRACK IDENTIFICATION IN CANTILEVER BEAMS USING EXPERIMENTAL FREQUENCIES AND FINITE ELEMENT MODEL H Nahvi, M Jabbari Sound and Vibration 11, 14, 2005 | | 2005 |
TheEffect of Support and Concentrated Mass on the Performance of Piezoelectric Beam Actuator and Fre-quencies M Jabbari, M Ghayour | | |