Mechanical characterizations of composite material with short Alfa fibers reinforcement H Mechakra, A Nour, S Lecheb, A Chellil Composite Structures 124, 152-162, 2015 | 68 | 2015 |
Impact of the fuselage damping characteristics and the blade rigidity on the stability of helicopter A Chellil, A Nour, S Lecheb, H Kebir, Y Chevalier Aerospace Science and Technology 29 (1), 235-252, 2013 | 12 | 2013 |
Dynamic prediction fatigue life of composite wind turbine blade S Lecheb, A Nour, A Chellil, H Mechakra, H Ghanem, H Kebir Steel and Composite Structures 18 (3), 673-691, 2015 | 10 | 2015 |
Characterization of low-velocity impact and post-impact damage of luffa mat composite using acoustic emission and digital image correlation M Grabi, A Chellil, M Habibi, H Grabi, L Laperriere Journal of Composite Materials 56 (11), 1651-1665, 2022 | 8 | 2022 |
Dynamic modeling of milling and effect of tool path on machining stability K Ikkache, A Chellil, S Lecheb, H Mechakra international journal of manufacturing technology 121 (3-4), 1769-1783, 2022 | 5 | 2022 |
An advanced dynamic repair of edge crack aluminum plate with a composite patch S Lecheb, A Nour, A Chellil, H Mechakra, A Amarache, H Kebir Materials Science Forum 794, 716-721, 2014 | 4 | 2014 |
Strain and damage assessment of treated and untreated luffa mat composite using acoustic emission and digital image correlation M Grabi, A Chellil, M Habibi, L Laperriere, H Grabi Journal of Natural Fibers 19 (16), 12536-12547, 2022 | 3 | 2022 |
Parameter identification of crack growth in helicopter blade A Chellil, A Nour, S Lecheb, M Chibani, H Kebir Key Engineering Materials 577, 673-676, 2014 | 3 | 2014 |
Aeroelastic stability analysis of composite rotor blade A Chellil, AT Settet, S Lecheb, A Nour, A Yahiaoui, H Kebir 2013 5th International Conference on Modeling, Simulation and Applied …, 2013 | 3 | 2013 |
Fatigue crack initiation and vibration prediction life of turbine blade S Lecheb, T Djedid, A Chellil, A Nour, M Cherigui, H Kebir 2013 5th International Conference on Modeling, Simulation and Applied …, 2013 | 3 | 2013 |
Experimental and numerical investigation of impact behavior in honeycomb sandwich composites A Djellab, A Chellil, S Lecheb, B Safi, H Mechakra, A Houari, H Kebir, ... Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2024 | 2 | 2024 |
Alkaline Treatment’s Effect on Mechanical Properties and Damage Assessment Through Acoustic Emission of Luffa Fiber Composite M Grabi, A Chellil, M Habibi, L Laperriere Fibers and Polymers 23 (10), 2855-2865, 2022 | 2 | 2022 |
Effect of stitch orientation on tensile and flexural bending mechanical properties and damage mechanisms of glass/epoxy composites laminate H Mechakra, S Lecheb, A Chellil, B Safi International Journal of Materials Engineering Innovation 12 (4), 310-324, 2022 | 2 | 2022 |
Foamed glass granulated-based self-compacting mortars: open-porosity effect on rheological and mechanical properties S Lecheb, A Chellil, K Chahour, B Safi Cement-Wapno-Beton= Cement Lime Concrete 26 (3), 242-252, 2021 | 2 | 2021 |
Material Fracture of Dynamic VAWT Blade S Lecheb, A Chellil, H Mechakra, B Safi, Y Beggah, Y Lounici Proceedings of the Third International Symposium on Materials and …, 2018 | 2 | 2018 |
Stress intensity factor for dynamic cracking of composite material by x-fem method S Lecheb, A Nour, A Chellil, H Mechakra, N Hamad, H Kebir Int J Math, Comput, Phys, Electr Comput Eng 8 (5), 809-15, 2014 | 2 | 2014 |
Mechanical characteristics on fatigue crack propagation in aluminium plate A Chellil, A Nour, S Lecheb, H Mechakra, L Addar, H Kebir International Journal of Computer and Systems Engineering 8 (5), 1018-1021, 2014 | 2 | 2014 |
Identification et modélisation par éléments finis des charges dynamiques du rotor principale d'hélicoptère A Chellil Boumerdes, Université M'hamed Bougara. Faculté des sciences de l'ingenieur, 2008 | 2 | 2008 |
Impact Behavior Analysis of Luffa/Epoxy Composites Under Low-Velocity Loading M Grabi, A Chellil, S Lecheb, H Grabi, A Nour Applied Composite Materials, 1-32, 2024 | 1 | 2024 |
Prediction of a chatter stability of thin-walled parts during high-speed milling considering a variation of dynamic characteristics based on surface roughness measurement M Damous, N Zeroudi, A Chellil, K Ikkache The International Journal of Advanced Manufacturing Technology 127 (11-12 …, 2023 | 1 | 2023 |