| Optimization of printing parameters for improvement of mechanical and thermal performances of 3D printed poly (ether ether ketone) parts A El Magri, K El Mabrouk, S Vaudreuil, H Chibane, ME Touhami Journal of Applied Polymer Science 137 (37), 49087, 2020 | 118 | 2020 |
| Mechanical properties of CF-reinforced PLA parts manufactured by fused deposition modeling AE Magri, K El Mabrouk, S Vaudreuil, ME Touhami Journal of Thermoplastic Composite Materials 34 (5), 581-595, 2021 | 117 | 2021 |
| An overview on the influence of process parameters through the characteristic of 3D-printed PEEK and PEI parts A El Magri, S Vanaei, S Vaudreuil High Performance Polymers 33 (8), 862-880, 2021 | 61 | 2021 |
| Experimental investigation and optimization of printing parameters of 3D printed polyphenylene sulfide through response surface methodology A El Magri, K El Mabrouk, S Vaudreuil, M Ebn Touhami Journal of Applied Polymer Science 138 (1), 49625, 2021 | 60 | 2021 |
| 3D printed and conventional membranes—a review BG Thiam, A El Magri, HR Vanaei, S Vaudreuil Polymers 14 (5), 1023, 2022 | 41 | 2022 |
| An investigation to study the effect of process parameters on the strength and fatigue behavior of 3D-printed PLA-graphene A El Magri, S Vanaei, M Shirinbayan, S Vaudreuil, A Tcharkhtchi Polymers 13 (19), 3218, 2021 | 37 | 2021 |
| Preparation and characterization of poly (ether ether ketone)/poly (ether imide)[PEEK/PEI] blends for fused filament fabrication A El Magri, K El Mabrouk, S Vaudreuil Journal of Materials Science 56 (25), 14348-14367, 2021 | 32 | 2021 |
| Effects of printing parameters on the tensile behavior of 3D‐printed acrylonitrile styrene acrylate (ASA) material in Z direction A El Magri, SE Ouassil, S Vaudreuil Polymer Engineering & Science 62 (3), 848-860, 2022 | 31 | 2022 |
| Investigating the effect of printing conditions and annealing on the porosity and tensile behavior of 3D‐printed polyetherimide material in Z‐direction SE Ouassil, A El Magri, HR Vanaei, S Vaudreuil Journal of Applied Polymer Science 140 (4), e53353, 2023 | 27 | 2023 |
| Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering A El Magri, SE Bencaid, HR Vanaei, S Vaudreuil Polymers 14 (17), 3674, 2022 | 27 | 2022 |
| Printing temperature effects on the structural and mechanical performances of 3D printed Poly-(phenylene sulfide) material A El Magri, S Vaudreuil, K El Mabrouk, ME Touhami IOP Conference Series: Materials Science and Engineering 783 (1), 012001, 2020 | 21 | 2020 |
| Numerical–experimental analysis toward the strain rate sensitivity of 3D-printed nylon reinforced by short carbon fiber HR Vanaei, AE Magri, MA Rastak, S Vanaei, S Vaudreuil, A Tcharkhtchi Materials 15 (24), 8722, 2022 | 18 | 2022 |
| An overview on the progress and development of modified sulfonated polyether ether ketone membranes for vanadium redox flow battery applications BG Thiam, A El Magri, S Vaudreuil High Performance Polymers 34 (2), 131-148, 2022 | 18 | 2022 |
| Optimizing the mechanical properties of 3D-printed PLA-graphene composite using response surface methodology A El Magri, S Vaudreuil Archives of Materials Science and Engineering 112 (1), 2021 | 11 | 2021 |
| Effects of power and laser speed on the mechanical properties of AlSi7Mg0. 6 manufactured by laser powder bed fusion S Vaudreuil, SE Bencaid, HR Vanaei, A El Magri Materials 15 (23), 8640, 2022 | 10 | 2022 |
| A combined experimental and computational (DFT, RDF, MC and MD) investigation of epoxy resin as a potential corrosion inhibitor for mild steel in a 0.5 M H2SO4 environment R Hsissou, K Dahmani, A El Magri, A Hmada, Z Safi, N Dkhireche, ... Polymers 15 (8), 1967, 2023 | 9 | 2023 |
| Effect of printing parameters on tensile, thermal and structural properties of 3D‐printed poly (ether ketone ketone) PEKK material using fused deposition modeling A El Magri, S Vaudreuil, A Ben Ayad, A El Hakimi, R El Otmani, ... Journal of Applied Polymer Science 140 (29), e54078, 2023 | 6 | 2023 |
| Synthesis Characterization and Highly Protective Efficiency of Tetraglycidyloxy Pentanal Epoxy Prepolymer as a Potential Corrosion Inhibitor for Mild Steel in 1 M HCl Medium R Hsissou, R Lachhab, A El Magri, S Echihi, HR Vanaei, M Galai, ... Polymers 14 (15), 3100, 2022 | 5 | 2022 |
| Chemical composition of essential oils of Citrus limon peel from three Moroccan regions and their antioxidant, anti-inflammatory, antidiabetic and dermatoprotective properties M El Aboubi, DB Hdech, S Bikri, A Benayad, A El Magri, Y Aboussaleh Journal of Herbmed Pharmacology 12 (1), 118-127, 2022 | 4 | 2022 |
| New xanthene diones compounds as a corrosion inhibitor of mild steel in acid medium: electrochemical, surface characterization and theoretical insights K Dahmani, M Galai, M Ouakki, Z Benzekri, A El Magri, R lachhab, S Kaya, ... Chemistry Africa 6 (4), 2049-2069, 2023 | 3 | 2023 |
Sebastien VaudreuilEuromed University of FesVerified email at ueuromed.org
