Follow
Venkata Timmaraju Mallina
Venkata Timmaraju Mallina
Other namesMallina Venkata Timmaraju
Associate Professor, Department of Mechanical Engineering, Indian Institute of Information
Verified email at iiitdm.ac.in - Homepage
Title
Cited by
Cited by
Year
Development of efficient short/continuous fiber thermoplastic composite automobile suspension upper control arm
P Anandakumar, MV Timmaraju, R Velmurugan
Materials Today: Proceedings 39, 1187-1191, 2021
362021
Influence of imbibed moisture and organoclay on tensile and indentation behavior of polyamide 66/hectorite nanocomposites
MV Timmaraju, R Gnanamoorthy, K Kannan
Composites Part B: Engineering 42 (3), 466-472, 2011
322011
Effect of environment on flexural fatigue behavior of polyamide 66/hectorite nanocomposites
MV Timmaraju, R Gnanamoorthy, K Kannan
International journal of fatigue 33 (4), 541-548, 2011
312011
Effect of initial imbibed moisture content on flexural fatigue behavior of polyamide 66/hectorite nanocomposites at laboratory condition
MV Timmaraju, R Gnanamoorthy, K Kannan
Materials Science and Engineering: A 528 (6), 2960-2966, 2011
112011
Influence of preheating on the fracture behavior of over-molded short/continuous fiber reinforced polypropylene composites
A Paramasivam, MV Timmaraju, R Velmurugan
Journal of Composite Materials 55 (29), 4387-4397, 2021
72021
Thermodynamic analysis of solar low-temperature differential Stirling engine considering imperfect regeneration and thermal losses
S Ramachandran, N Kumar, MV Timmaraju
Journal of Solar Energy Engineering 142 (5), 051012, 2020
62020
Influence of organoclay on flexural fatigue behavior of polyamide 66/hectorite nanocomposites at laboratory condition
MV Timmaraju, R Gnanamoorthy, K Kannan
Polymer composites 31 (11), 1977-1986, 2010
62010
Experimental and numerical prediction of effect of frequency on bending fatigue performance of polyamide 66/hectorite nanocomposite
M Venkata Timmaraju, R Gnanamoorthy, K Kannan, G Sriharsha
Plastics, Rubber and Composites 47 (6), 282-295, 2018
32018
Effect of interface temperature on low‐velocity impact response of injection over‐molded short/continuous fiber reinforced polypropylene composites
A Paramasivam, VT Mallina, V Ramachandran, VV Kumar
Polymer Composites 45 (2), 1165-1177, 2024
22024
Numerical studies on contact behavior in polymer composite sprocket-Roller chain drive under dynamic conditions
S Kanniyappan, M Venkata Timmaraju, G Rajappa
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2022
22022
Thermodynamic investigation of an irreversible combined stirling-organic rankine cycle for maximum power output condition
S Ramachandran, N Kumar, MV Timmaraju
Journal of Engineering for Gas Turbines and Power 143 (7), 071016, 2021
22021
A Comprehensive Perspective of Waste Heat Recovery Potential from Solar Stirling Engines
S Ramachandran, N Kumar, VT Mallina
E3S Web of Conferences 313, 06001, 2021
22021
Effect of imbibed moisture on monotonic and low‐velocity impact behavior of injection over‐molded short/continuous fiber reinforced polypropylene composites
P Anandakumar, MV Timmaraju, R Velmurugan
Journal of Applied Polymer Science 141 (4), e54845, 2024
12024
Quasi-Static and Low-Velocity Impact Behavior of Injection Over-Molded Short/Continuous Fiber Reinforced Polypropylene Composites
P Anandakumar, MV Timmaraju, R Velmurugan
Applied Composite Materials 30 (6), 2025-2046, 2023
12023
Low-velocity impact behavior of injection over-molded short/continuous fiber reinforced polypropylene composites
P Anandakumar, MV Timmaraju, R Velmurugan
Materials Today: Proceedings, 2023
12023
Monotonic and cyclic behavior of polyamide 66/hectorite nanocomposites in marine environment
M Venkata Timmaraju, R Gnanamoorthy, K Kannan
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of …, 2019
12019
Lightweight design of steel sprocket for roller chain drive using explicit dynamic simulation
K Sivakumar, MV Timmaraju, R Gnanamoorthy
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of …, 2024
2024
Numerical prediction of influence of chain length on contact pressure distribution on polymer composite sprocket
K Sivakumar, MV Timmaraju, R Gnanamoorthy
Materials Today: Proceedings, 2023
2023
Effect of Top Losses and Imperfect Regeneration on Power Output and Thermal Efficiency of a Solar Low Delta-T Stirling Engine
S Ramachandran, N Kumar, MV Timmaraju
Proceedings of the 7th International Conference on Advances in Energy …, 2020
2020
Parametric study of a low-temperature differential Stirling engine for low-grade thermal energy recovery
S Ramachandran, N Kumar, MV Timmaraju
Proceedings of the 25th National and 3rd International ISHMT-ASTFE Heat and …, 2019
2019
The system can't perform the operation now. Try again later.
Articles 1–20