| Investigation of physical properties for jatropha oil in different temperature as lubricant oil I Golshokouh, M Golshokouh, FN Ani, E Kianpour, S Syahrullail Life Science Journal 10 (8), 110-119, 2013 | 41 | 2013 |
| Dynamic analysis of flow field at the end of combustor simulator E Kianpour, NAC Sidik, MASM Bozorg Jurnal Teknologi 58 (2), 2012 | 18 | 2012 |
| Thermodynamic analysis of flow field at the end of combustor simulator E Kianpour, NAC Sidik, MASM Bozorg International Journal of Heat and Mass Transfer 61, 389-396, 2013 | 15 | 2013 |
| Film cooling effectiveness in a gas turbine engine: a review E Kianpour, NAC Sidik, I Golshokouh Jurnal Teknologi 71 (2), 25-35, 2014 | 12 | 2014 |
| Measurement of film effectiveness for cylindrical and row trenched cooling holes at different blowing ratios E Kianpour, NAC Sidik, I Golshokouh Numerical Heat Transfer, Part A: Applications 66 (10), 1154-1171, 2014 | 8 | 2014 |
| Film cooling effectiveness using cylindrical and compound cooling holes at the end wall of combustor simulator S Salimi, A Fazeli, E Kianpour Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 1 (1 …, 2014 | 8 | 2014 |
| Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90o at Different Blowing Ratios E Kianpour, NAC Sidik, MA Wahid CFD Letters 5 (4), 165-173, 2013 | 8 | 2013 |
| The Effect of Blowing Ratio on Film Cooling Effectiveness Using Cylindrical and Row Trenched Cooling Holes with Alignment Angle of 90 Degrees N Azwadi, E Kianpour Mathematical Problems in Engineering 2014, 2014 | 6 | 2014 |
| Thermodynamic Analysis of Flow Field at the End of Combustor Simulator E Kianpour, NAC Sidik, MASM Bozorg Applied Mechanics and Materials 225, 261-266, 2012 | 5 | 2012 |
| Numerical Simulation of Steady and Unsteady Flow and Entropy Generation by Nanofluid Within a Sinusoidal Channel E Kianpour, NAC Sidik, SMHR Dehkordi, SNA Yusof Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 89 (2 …, 2022 | 3 | 2022 |
| Investigation of natural convection heat transfer of MHD hybrid nanofluid in a triangular enclosure AA Rashidi, E Kianpour Journal of Computational & Applied Research in Mechanical Engineering …, 2021 | 3 | 2021 |
| Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor endwall E Kianpour, NAC Sidik Case Studies in Thermal Engineering 4, 76-84, 2014 | 3 | 2014 |
| Film-Cooling Techniques at the End of Combustor and Inlet of Turbine in a Gas Turbine Engine: A Review NA Che Sidik, K Ehsan Applied Mechanics and Materials 554, 236-240, 2014 | 3 | 2014 |
| Compound cooling holes for film cooling of combustor simulator: a review S Salimi, E Kianpour, A Fazeli J. Adv. Rev. Sci. Res. 1 (1), 10-15, 2014 | 3 | 2014 |
| Dynamic and Thermodynamic Analysis of Film-Cooling NAC Sidik, E Kianpour, I Golshokouh International Review of Mechanical Engineering (I. RE. ME) 7 (3), 2013 | 3 | 2013 |
| Modeling, exergy analysis and optimization of cement plant industry H Abutorabi, E Kianpour Journal of Mechanical and Energy Engineering 6 (1), 2022 | 2 | 2022 |
| Flow field, heat transfer and entropy generation of nanofluid in a microchannel using the finite volume method M Kerdarian, E Kianpour Journal of Computational & Applied Research in Mechanical Engineering …, 2019 | 2 | 2019 |
| Palm fatty acid as a new renewable source for industrial lubricant I Golshokouh, S Syahrullail, E Kianpour European Online Journal of Natural and Social Sciences 3 (3 (s)), pp. 383-389, 2014 | 2 | 2014 |
| The effects of row trench holes with alignment angle of+ 60 degrees on film cooling effectiveness at low blowing ratios E Kianpour Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 4 (1 …, 2014 | 2 | 2014 |
| Computational investigation of film cooling from cylindrical and row trenched cooling holes near the combustor end wall NA Che Sidik, K Ehsan Applied Mechanics and Materials 554, 225-229, 2014 | 2 | 2014 |
Samion SyahrullailLecturer of Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, MalaysiaVerified email at fkm.utm.my
