| Tool wear mechanisms and multi-response optimization of tool life and volume of material removed in turning of N-155 iron–nickel-base superalloy using RSM B Davoodi, B Eskandari Measurement 68, 286-294, 2015 | 115 | 2015 |
| Multi-objective optimization of parameters in turning of N-155 iron-nickel-base superalloy using gray relational analysis B Eskandari, B Davoodi, H Ghorbani Journal of the Brazilian Society of Mechanical Sciences and Engineering 40, 1-12, 2018 | 31 | 2018 |
| Evaluation of surface roughness and optimization of cutting parameters in turning of AA2024 alloy under different cooling-lubrication conditions using RSM method SH Musavi, B Davoodi, B Eskandari Journal of Central South University 27 (6), 1714-1728, 2020 | 25 | 2020 |
| Pre-cooling intensity effects on cooling efficiency in cryogenic turning SH Musavi, B Davoodi, B Eskandari Arabian journal for science and engineering 44 (12), 10389-10396, 2019 | 16 | 2019 |
| Turning of Inconel 718 using liquid nitrogen: multi-objective optimization of cutting parameters using RSM B Eskandari, S Bhowmick, AT Alpas The International Journal of Advanced Manufacturing Technology 120 (5), 3077 …, 2022 | 7 | 2022 |
| Investigation of wear mechanisms and tool life in turning of N-155 iron-nickel-base superalloy using response surface methodology B Davoodi, B Eskandari Modares Mechanical Engineering 14 (15), 51-58, 2015 | 7 | 2015 |
| Effect of WS2 particles in cutting fluid on tribological behaviour of Ti–6Al–4V and on its machining performance S Bhowmick, B Eskandari, G Krishnamurthy, AT Alpas Tribology-Materials, Surfaces & Interfaces 15 (4), 229-242, 2021 | 6 | 2021 |
| Evaluation of surface damage mechanisms and optimisation of cutting parameters in turning of N-155 iron-nickel-base superalloy B Davoodi, B Eskandari International Journal of Machining and Machinability of Materials 21 (1-2 …, 2019 | 6 | 2019 |
| Surface Roughness Optimization in Machining of N-155 Iron-Nickel-Base Superalloy Using the Taguchi Method B Davoodi, B Eskandari | 5 | 2015 |
| Flooded drilling of Inconel 718 using graphene incorporating cutting fluid B Eskandari, S Bhowmick, AT Alpas The International Journal of Advanced Manufacturing Technology 112, 1-14, 2021 | 4 | 2021 |
| Investigation of the role of tribolayer formation in improving drilling performance of Ti-6Al-4V using minimum quantity of lubrication S Bhowmick, B Eskandari, MZU Khan, AT Alpas Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2021 | 2 | 2021 |
| Low Friction and High Wear Resistance of Plasma Electrolytic Oxidation (PEO)-Coated AZ31 Mg Alloy Sliding against Hydrogenated DLC (aCH) at Elevated Temperatures S Bhowmick, F Muhaffel, B Eskandari, H Cimenoglu, AT Alpas Coatings 12 (5), 607, 2022 | 1 | 2022 |
| Machining of Inconel 718 nickel-based superalloy using nano-lubricants and liquid nitrogen B Eskandari University of Windsor (Canada), 2020 | | 2020 |
Behnam DavoodiAssociate Professor, Iran University of Science and TechnologyVerified email at iust.ac.ir
