Seguir
SONIA E RUIZ
SONIA E RUIZ
Dirección de correo verificada de ii.unam.mx - Página principal
Título
Citado por
Citado por
Año
Seismic failure rates of multistory frames
L Esteva, SE Ruiz
Journal of Structural Engineering 115 (2), 268-284, 1989
1181989
Influence of ground motion intensity on the effectiveness of tuned mass dampers
R Soto‐Brito, SE Ruiz
Earthquake engineering & structural dynamics 28 (11), 1255-1271, 1999
1081999
Comparing vector-valued intensity measures for fragility analysis of steel frames in the case of narrow-band ground motions
E Bojórquez, I Iervolino, A Reyes-Salazar, SE Ruiz
Engineering Structures 45, 472-480, 2012
1072012
Energy-based damage index for steel structures
E Bojórquez, A Reyes-Salazar, A Terán-Gilmore, SE Ruiz
Steel and Composite Structures 10 (4), 331-348, 2010
1062010
The Mexico earthquake of September 19, 1985—Nonstationary models of seismic ground acceleration
M Grigoriu, SE Ruiz, E Rosenblueth
Earthquake Spectra 4 (3), 551-568, 1988
1041988
Reliability-based evaluation of steel structures using energy concepts
E Bojorquez, SE Ruiz, A Teran-Gilmore
Engineering Structures 30 (6), 1745-1759, 2008
872008
The Mexico Earthquake of September 19, 1985–
SE Ruiz, E Rosenblueth, M EERI, R Diederich
Earthquake Spectra 5 (1), 89-102, 1989
76*1989
Structural reliability evaluation considering capacity degradation over time
MA Torres, SE Ruiz
Engineering Structures 29 (9), 2183-2192, 2007
752007
Evaluation of structural reliability of steel frames: interstory drift versus plastic hysteretic energy
E Bojórquez, A Terán-Gilmore, SE Ruiz, A Reyes-Salazar
Earthquake Spectra 27 (3), 661-682, 2011
482011
A new ground motion intensity measure IB
E Bojórquez, R Chávez, A Reyes-Salazar, SE Ruiz, J Bojórquez
Soil Dynamics and Earthquake Engineering 99, 97-107, 2017
442017
Influence of structural capacity uncertainty on seismic reliability of buildings under narrow‐band motions
MA Montiel, SE Ruiz
Earthquake engineering & structural dynamics 36 (13), 1915-1934, 2007
432007
Reliability-based optimal load factors for seismic design of buildings
J Bojórquez, SE Ruiz, B Ellingwood, A Reyes-Salazar, E Bojórquez
Engineering Structures 151, 527-539, 2017
392017
Reduction factors for seismic design spectra for structures with viscous energy dampers
T Castillo, SE Ruiz
Journal of Earthquake Engineering 18 (3), 323-349, 2014
362014
Structural reliability of reinforced concrete buildings under earthquakes and corrosion effects
J Bojórquez, S Ponce, SE Ruiz, E Bojórquez, A Reyes-Salazar, M Barraza, ...
Engineering Structures 237, 112161, 2021
332021
Reliability of short and slender reinforced-concrete columns
SE Ruiz, JC Aguilar
Journal of Structural Engineering 120 (6), 1850-1865, 1994
321994
Strength reduction factors for the valley of Mexico taking into account low cycle fatigue effects
E Bojórquez, SE Ruiz
13º World Conference on Earthquake Engineering, 2004
292004
Direct displacement-based design for buildings with hysteretic dampers, using best combinations of stiffness and strength ratios
VA Segovia, SE Ruiz
Journal of Earthquake Engineering 21 (5), 752-775, 2017
272017
Escalamiento de acelerogramas y número mínimo de registros requeridos para el análisis de estructuras
SMC Dorado, SER Gómez, MAM Ortega
Revista de Ingeniería Sísmica, 1-24, 2005
252005
Design live loads for office buildings in Mexico and the United States
SE Ruiz, A Soriano
Journal of Structural Engineering 123 (6), 816-822, 1997
251997
Demands and distribution of hysteretic energy in moment resistant self-centering steel frames
A López-Barraza, SE Ruiz, A Reyes-Salazar, E Bojórquez
Steel and Composite Structures 20 (5), 1155-71, 2016
242016
El sistema no puede realizar la operación en estos momentos. Inténtalo de nuevo más tarde.
Artículos 1–20