| Machinability study of glass fibre-reinforced polymer composites during end milling AI Azmi, RJT Lin, D Bhattacharyya The International Journal of Advanced Manufacturing Technology 64, 247-261, 2013 | 194 | 2013 |
| Kerf taper and delamination damage minimization of FRP hybrid composites under abrasive water-jet machining IW MM, AI Azmi, CC Lee, AF Mansor The International Journal of Advanced Manufacturing Technology 94 (5), 1727-1744, 2018 | 122 | 2018 |
| Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites AAA Nasir, AI Azmi, ANM Khalil Measurement 75, 298-307, 2015 | 117 | 2015 |
| Monitoring of tool wear using measured machining forces and neuro-fuzzy modelling approaches during machining of GFRP composites AI Azmi Advances in Engineering Software 82, 53-64, 2015 | 105 | 2015 |
| Tool wear prediction models during end milling of glass fibre-reinforced polymer composites AI Azmi, RJT Lin, D Bhattacharyya The International Journal of Advanced Manufacturing Technology 67, 701-718, 2013 | 81 | 2013 |
| Delamination and surface roughness analyses in drilling hybrid carbon/glass composite CL Tan, AI Azmi, N Muhammad Materials and Manufacturing Processes 31 (10), 1366-1376, 2016 | 80 | 2016 |
| Experimental study of machinability of GFRP composites by end milling AI Azmi, RJT Lin, D Bhattacharyya Materials and Manufacturing Processes 27 (10), 1045-1050, 2012 | 75 | 2012 |
| Experimental study and empirical analyses of abrasive waterjet machining for hybrid carbon/glass fiber-reinforced composites for improved surface quality IW Ming Ming, AI Azmi, LC Chuan, AF Mansor The International Journal of Advanced Manufacturing Technology 95, 3809-3822, 2018 | 65 | 2018 |
| Roles of new bio-based nanolubricants towards eco-friendly and improved machinability of Inconel 718 alloys MAM Ali, AI Azmi, MN Murad, MZM Zain, ANM Khalil, NA Shuaib Tribology International 144, 106106, 2020 | 60 | 2020 |
| Influence of hydrothermal ageing on the mechanical properties of an adhesively bonded joint with different adherends M Mariam, M Afendi, MSA Majid, MJM Ridzuan, AI Azmi, MTH Sultan Composites Part B: Engineering 165, 572-585, 2019 | 60 | 2019 |
| Effect of Al2O3 nanolubricant with SDBS on tool wear during turning process of AISI 1050 with minimal quantity lubricant ANM Khalil, MAM Ali, AI Azmi Procedia Manufacturing 2, 130-134, 2015 | 60 | 2015 |
| Evaluation of mechanical properties of hybrid fiber reinforced polymer composites and their architecture MMW Irina, AI Azmi, CL Tan, CC Lee, ANM Khalil Procedia Manufacturing 2, 236-240, 2015 | 59 | 2015 |
| Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys MA Mahboob Ali, AI Azmi, AN Mohd Khalil, KW Leong The International Journal of Advanced Manufacturing Technology 92, 117-127, 2017 | 54 | 2017 |
| A review on mode-I interlaminar fracture toughness of fibre reinforced composites N Nasuha, AI Azmi, CL Tan Journal of Physics: Conference Series 908 (1), 012024, 2017 | 44 | 2017 |
| Performance evaluations of carbon/glass hybrid polymer composites CL Tan, AI Azmi, N Muhammad Advanced Materials Research 980, 8-12, 2014 | 36 | 2014 |
| Chip formation studies in machining fibre reinforced polymer composites AI Azmi International Journal of Materials and Product Technology 46 (1), 32-46, 2013 | 35 | 2013 |
| Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models AAA Nasir, AI Azmi, TC Lih, MSA Majid Composites Part B: Engineering 165, 222-232, 2019 | 34 | 2019 |
| The effect of cutting parameters on cutting force and tool wear in machining Nickel Titanium Shape Memory Alloy ASTM F2063 under Minimum Quantity Nanolubricant ANM Khalil, AI Azmi, MN Murad, MAM Ali Procedia Cirp 77, 227-230, 2018 | 32 | 2018 |
| Mechanical properties of carbon and glass fibre reinforced composites produced by additive manufacturing: A short review NWY Omar, NA Shuaib, MHJA Hadi, AI Azmi IOP Conference Series: Materials Science and Engineering 670 (1), 012020, 2019 | 27 | 2019 |
| Effects of minimal quantity lubricants reinforced with nano-particles on the performance of carbide drills for drilling nickel-titanium alloys R Rosnan, MN Murad, AI Azmi, I Shyha Tribology International 136, 58-66, 2019 | 25 | 2019 |
Richard J T LinHonorary Research Academic in the Department of Mechanical Enginering, the University of AucklandVerified email at auckland.ac.nz
