Follow
Gnanamoorthy R
Gnanamoorthy R
Professor, Indian Institute of Technology Madras, India and Founder Former Director, IIITDM
Verified email at iitm.ac.in - Homepage
Title
Cited by
Cited by
Year
Tribological behaviour of clay–thermoset polyester nanocomposites
P Jawahar, R Gnanamoorthy, M Balasubramanian
Wear 261 (7-8), 835-840, 2006
1562006
Sliding wear performance of polyamide 6–clay nanocomposites in water
G Srinath, R Gnanamoorthy
Composites science and technology 67 (3-4), 399-405, 2007
1542007
Effect of rotational speed on the performance of unreinforced and glass fiber reinforced Nylon 6 spur gears
S Senthilvelan, R Gnanamoorthy
Materials & design 28 (3), 765-772, 2007
1382007
Damage mechanisms in injection molded unreinforced, glass and carbon reinforced nylon 66 spur gears
S Senthilvelan, R Gnanamoorthy
Applied composite materials 11, 377-397, 2004
1312004
Damping characteristics of unreinforced, glass and carbon fiber reinforced nylon 6/6 spur gears
S Senthilvelan, R Gnanamoorthy
Polymer testing 25 (1), 56-62, 2006
1292006
Effect of nanoclay reinforcement on tensile and tribo behaviour of Nylon 6
G Srinath, R Gnanamoorthy
Journal of Materials Science 40, 2897-2901, 2005
1202005
Impact force of low velocity liquid droplets measured using piezoelectric PVDF film
AS Grinspan, R Gnanamoorthy
Colloids and Surfaces A: Physicochemical and Engineering Aspects 356 (1-3 …, 2010
1162010
Effect of gear tooth fillet radius on the performance of injection molded Nylon 6/6 gears
S Senthilvelan, R Gnanamoorthy
Materials & design 27 (8), 632-639, 2006
1062006
Transmission efficiency of polyamide nanocomposite spur gears
S Kirupasankar, C Gurunathan, R Gnanamoorthy
Materials & Design 39, 338-343, 2012
842012
Transmission efficiency of polyamide nanocomposite spur gears
S Kirupasankar, C Gurunathan, R Gnanamoorthy
Materials & Design 39, 338-343, 2012
842012
Effect of short fibre reinforcement on the friction and wear behaviour of nylon 66
G Srinath, R Gnanamoorthy
Applied Composite Materials 12, 369-383, 2005
842005
Influence of plasma nitriding on fretting wear behaviour of Ti–6Al–4V
MM Ali, SGS Raman, SD Pathak, R Gnanamoorthy
Tribology International 43 (1-2), 152-160, 2010
812010
Influence of plasma nitriding on fretting wear behaviour of Ti–6Al–4V
MM Ali, SGS Raman, SD Pathak, R Gnanamoorthy
Tribology International 43 (1-2), 152-160, 2010
812010
Abrasive wear behavior of sintered steels prepared with MoS2 addition
S Dhanasekaran, R Gnanamoorthy
Wear 262 (5-6), 617-623, 2007
782007
Development of a fretting wear test rig and preliminary studies for understanding the fretting wear properties of steels
R Ramesh, R Gnanamoorthy
Materials & design 27 (2), 141-146, 2006
712006
Gear tooth wear in sintered spur gears under dry running conditions
S Dhanasekaran, R Gnanamoorthy
Wear 265 (1-2), 81-87, 2008
672008
Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti–6Al–4V
SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy
Tribology International 57, 107-114, 2013
622013
Influence of counterbody material on fretting wear behaviour of surface mechanical attrition treated Ti–6Al–4V
SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy
Tribology International 57, 107-114, 2013
622013
Fretting wear behaviour of surface mechanical attrition treated alloy 718
SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy
Surface and Coatings Technology 206 (21), 4425-4432, 2012
612012
Fretting wear behaviour of surface mechanical attrition treated alloy 718
SA Kumar, SGS Raman, TSNS Narayanan, R Gnanamoorthy
Surface and Coatings Technology 206 (21), 4425-4432, 2012
612012
The system can't perform the operation now. Try again later.
Articles 1–20