| Solidification pattern, microstructure and texture development in Laser Powder Bed Fusion (LPBF) of Al10SiMg alloy H Qin, V Fallah, Q Dong, M Brochu, MR Daymond, M Gallerneault Materials Characterization 145, 29-38, 2018 | 93 | 2018 |
| Rapid solidification and non-equilibrium phase constitution in laser powder bed fusion (LPBF) of AlSi10Mg alloy: analysis of nano-precipitates, eutectic phases, and hardness … H Qin, Q Dong, V Fallah, MR Daymond Metallurgical and Materials Transactions A 51, 448-466, 2020 | 81 | 2020 |
| Irradiation damage and hardening in pure Zr and Zr-Nb alloys at 573 K from self-ion irradiation Q Dong, H Qin, Z Yao, MR Daymond Materials & Design 161, 147-159, 2019 | 49 | 2019 |
| Strengthening and toughening austenitic steel by introducing gradient martensite via cyclic forward/reverse torsion N Guo, Z Zhang, Q Dong, H Yu, B Song, L Chai, C Liu, Z Yao, ... Materials & Design 143, 150-159, 2018 | 37 | 2018 |
| Effect of solidification cooling rate on kinetics of continuous/discontinuous Al3 (Sc, Zr) precipitation and the subsequent age-hardening response in cold-rolled AlMgSc (Zr) sheets Q Dong, A Howells, DJ Lloyd, M Gallerneault, V Fallah Materials Science and Engineering: A 772, 138693, 2020 | 35 | 2020 |
| Effect of pack-chromizing temperature on microstructure and performance of AISI 5140 steel with Cr-coatings J Hu, Y Zhang, X Yang, H Li, H Xu, C Ma, Q Dong, N Guo, Z Yao Surface and Coatings Technology 344, 656-663, 2018 | 29 | 2018 |
| Precipitation-induced mitigation of recrystallization in ultra-thin, cold-rolled AlScZrMn (Mg) sheets at brazing temperatures: The critical effect of alloy composition and … Q Dong, A Howells, MF Gallerneault, V Fallah Acta Materialia 186, 308-323, 2020 | 28 | 2020 |
| Effect of pre-existing dislocations on the formation of dislocation loops: Pure magnesium under electron irradiation Q Dong, Z Yao, P Saidi, MR Daymond Journal of Nuclear Materials 511, 43-55, 2018 | 24 | 2018 |
| Study of microstructure and precipitates of a Zr-2.5 Nb-0.5 Cu CANDU spacer material Q Dong, H Yu, Z Yao, F Long, L Balogh, MR Daymond Journal of Nuclear Materials 481, 153-163, 2016 | 24 | 2016 |
| Dislocation evolution at a crack-tip in a hexagonal close packed metal under plane-stress conditions Z Wang, C Cochrane, T Skippon, Q Dong, MR Daymond Acta Materialia 164, 25-38, 2019 | 23 | 2019 |
| Enhancing as-built microstructural integrity and tensile properties in laser powder bed fusion of AlSi10Mg alloy using a comprehensive parameter optimization procedure A Salandari-Rabori, P Wang, Q Dong, V Fallah Materials Science and Engineering: A 805, 140620, 2021 | 22 | 2021 |
| Influences of laser surface alloying with Cr on microstructural characteristics and hardness of pure Ti T Wang, L Zeng, Z Li, L Chai, T Cheng, L Zhang, V Fallah, Q Dong, Z Yao Metallurgical and Materials Transactions A 50, 3794-3804, 2019 | 20 | 2019 |
| Precipitate stability in a Zr–2.5 Nb–0.5 Cu alloy under heavy ion irradiation Q Dong, Z Yao, Q Wang, H Yu, MA Kirk, MR Daymond Metals 7 (8), 287, 2017 | 20 | 2017 |
| Cold rolled nanostructured super-pure Al (99.9996%) containing 1% Si particles: structure and strength T Huang, Q Dong, X Gong, N Hansen, Q Liu, X Huang Journal of Materials Science 47 (22), 7914-7920, 2012 | 17 | 2012 |
| Effect of input powder attributes on optimized processing and as-built tensile properties in laser powder bed fusion of AlSi10Mg alloy P Wang, A Salandari-Rabori, Q Dong, V Fallah Journal of Manufacturing Processes 64, 633-647, 2021 | 16 | 2021 |
| Crack propagation path selection and plastic deformation at a crack tip in zirconium Z Wang, Q Dong, N Guo, MR Daymond Materials Science and Engineering: A 779, 139143, 2020 | 15 | 2020 |
| Effect of annealing treatment on microstructure and properties of Cr-coatings deposited on AISI 5140 steel by brush-plating J Hu, J Jiang, H Li, X Yang, H Xu, Y Jin, C Ma, Q Dong, N Guo Coatings 8 (5), 193, 2018 | 14 | 2018 |
| Stacking faults observed in {101− 2} extension twins in a compressed high Sn content Zr alloy H Yu, Q Dong, Z Yao, MR Daymond Scripta Materialia 141, 72-75, 2017 | 14 | 2017 |
| Effect of the addition of Cu on irradiation induced defects and hardening in Zr-Nb alloys Q Dong, H Qin, Z Yao, Q Wang, MR Daymond Journal of Nuclear Materials 519, 10-21, 2019 | 12 | 2019 |
| A direct comparison of annealing in TEM thin foils and bulk material: Application to Zr-2.5 Nb-0.5 Cu alloy Q Dong, P Saidi, H Yu, Z Yao, MR Daymond Materials Characterization 151, 175-181, 2019 | 12 | 2019 |
Mark DaymondProfessor, Canada Research Chair, NSERC Industrial Reseach Chair, Dept. Mechanical & MaterialsVerified email at queensu.ca
