| Application of nano-fluids as coolant in heat exchangers: a review MA Khattak, A Mukhtar, SK Afaq Journal of Advanced Research in Materials Science 66 (1), 8-18, 2020 | 60 | 2020 |
| Application of Sayong ball clay membrane filtration for Ni (ii) removal from industrial wastewater SFM Noor, N Ahmad, MA Khattak, MS Khan, A Mukhtar, S Kazi, ... Journal of Taibah University for Science 11 (6), 949-954, 2017 | 22 | 2017 |
| Root cause analysis (RCA) of fractured ASTM A53 carbon steel pipe at oil & gas company MA Khattak, N Zareen, A Mukhtar, S Kazi, A Jalil, Z Ahmed, MM Jan Case Studies in Engineering Failure Analysis 7, 1-8, 2016 | 20 | 2016 |
| Common root causes of pressure vessel failures: a review MA Khattak, KA Khan, A Mukhtar Journal of Advanced Research in Applied Mechanics 21 (1), 22-37, 2016 | 15 | 2016 |
| A review on application of non destructive techniques on composites A Mukhtar, MA Khattak, IS Shahid, MSM Sufian Journal of Advanced Research in Applied Mechanics 20 (1), 12-21, 2016 | 10 | 2016 |
| Removal of heavy metal from wastewater: a review of current treatment processes SFM Noor, N Ahmad, MA Khattak, A Mukhtar, S Badshah, RU Khan Journal of Advanced Research in Materials Science 58 (1), 1-9, 2019 | 9 | 2019 |
| Reactor pressure vessel (RPV) design and fabrication: a literature review A Mukhtar, MA Khattak, AF Rafique, N Zareen Journal of Advanced Research in Applied Mechanics 22 (1), 1-12, 2016 | 9 | 2016 |
| Green initiatives: a review of ethanol as an alternate automobile fuel MA Khattak, A Mukhtar, N Zareen, S Kazi, MM Jan Journal of Advanced Research in Materials Science 59 (1), 1-13, 2019 | 8 | 2019 |
| Greener energy: Evaluating wind energy potential in Pakistan MA Khattak, A Mukhtar, AF Rafique Journal of Advanced Review on Scientific Research 23, 1-15, 2016 | 6 | 2016 |
| Performance evaluation of four-stroke SI (Spark ignition) engine using ethanol-gasoline blend E50 at variable load and compression ratio MA Khattaka, A Mukhtarb, MW Anjumb, SK Afaqb, MA Ahadc, M Khand, ... J. Teknol 79 (1), 63-68, 2017 | 2 | 2017 |
| Metallurgical Analysis of Stainless Steel Failed Shaft Due to Excessive Precipitation A Mukhtar, MS Malik, MA Khattak, ISS Ghumman Journal of Failure Analysis and Prevention 22 (5), 1965-1969, 2022 | | 2022 |
| Root cause failure analysis of a domestic pressure cooker through metallurgical characterization and computational simulation MA Khattak, A Mukhtar, ISS Ghumman, MM Jan Journal of failure analysis and prevention 18, 274-279, 2018 | | 2018 |
| DEGRADATION ASSESSMENT OF NUCLEAR POWER PLANT EXTRACTION STEAM PIPING AFTER LONG TERM SERVICE MA Khattaka, A Mukhtarb, ISS Ghummanb, S Badshahc, R Khanc, ... JURNAL TEKNOLOGI 78 (9), 143-148, 2016 | | 2016 |
| Reduction in Fuel Consumption Through Eco-Driving: A Review MA Khattak, A Mukhtar, S Khan, SA Hussain, U Akram, A Anwar, S Kazi Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 22 (1), 1-7, 2016 | | 2016 |
| Role of Eddy Current Non-Destructive Testing in the Fitness-For-Purpose Assessment of Steel Components MA Khattak, M Khan, T Subhani, KA Khan, A Mukhtar Journal of Advanced Research in Materials Science 20 (1), 1-5, 2016 | | 2016 |
M.A.KhattakFaculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310, Skudai, Johor, malaysiaVerified email at utm.my
