Thermo-mechanical analysis and estimation of turbine blade tip clearance of a small gas turbine engine under transient operating conditions R Kumar, VS Kumar, MM Butt, NA Sheikh, SA Khan, A Afzal Applied Thermal Engineering 179, 115700, 2020 | 49 | 2020 |
Determination of non-recrystallization temperature for niobium microalloyed steel MN Akhtar, M Khan, SA Khan, A Afzal, R Subbiah, SN Ahmad, M Husain, ... Materials 14 (10), 2639, 2021 | 34 | 2021 |
Nano-composites and their applications: A review SH Din, MA Shah, NA Sheikh, MM Butt Characterization and Application of Nanomaterials 3 (1), 40-48, 2020 | 32 | 2020 |
Engineered synthetic diamond film as a protective layer for tribological and machining applications: a review KA Najar, NA Sheikh, MM Butt, S Mushtaq, MA Shah Journal of Bio-and Tribo-Corrosion 5 (3), 59, 2019 | 31 | 2019 |
Enhancing the wear resistance of WC–Co cutting inserts using synthetic diamond coatings KA Najar, NA Sheikh, MM Butt, MA Shah Industrial Lubrication and Tribology 70 (7), 1224-1233, 2018 | 16 | 2018 |
A study on friction and wear characteristics of Fe–Cu–Sn alloy with MoS2 as solid lubricant under dry conditions S Mushtaq, MF Wani, M Nadeem, KA Najar, M Mursaleen Sādhanā 44 (12), 240, 2019 | 11 | 2019 |
Development of a dual-layered diamond-coated WC–Co cutting tool for enhancing tool life in the dry machining of mild-steel alloy KA Najar Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …, 2019 | 10 | 2019 |
CVD diamond SH Din, MA Shah, NA Sheikh, MM Butt transactions of the Indian Institute of Metals 72, 1-9, 2019 | 8 | 2019 |
Experimental evaluation of multilayered CVD- and PVD-coated carbide turning inserts in severe machining of AISI-4340 steel alloy Mohammad Mursaleen Butt 1, Kaleem Ahmad Najar 2* jurnal Tribologi 29, 117-143, 2021 | 6 | 2021 |
Investigations on a Two Stroke Cycle Spark Ignition Engine Using Gasoline Direct Injection MM Wani, M Mursaleen, S Parvez Energy and Power 2, 116-22, 2012 | 6 | 2012 |
Modeling and analysis of debonding in a smart beam in sensing mode, using variational formulation MM Butt, SN Ahmad Journal of King Saud University-Science 32 (1), 29-43, 2020 | 3 | 2020 |
Fluid flow characteristics and heat transfer performance in microchannel heat sinks: A review M Jan, MM Butt, MM Hassan Proceedings of the Institution of Mechanical Engineers, Part E: Journal of …, 2023 | 2 | 2023 |
Study of the failure of condenser tube in water cooled centrifugal chiller MA Reshi, M Mursaleen Journal of Physics: Conference Series 1240 (1), 012152, 2019 | 2 | 2019 |
Mechanical and Tribological Behavior of Microcrystalline CVD Diamond Coatings SH Din, NA Sheikh, MM Butt Journal of Bio-and Tribo-Corrosion 4, 1-10, 2018 | 2 | 2018 |
Design and analysis of composite leaf spring under static loading MM Reddy, S Sharma, D Tharun, M Mursaleen AIJR Abstracts, 62, 2021 | 1 | 2021 |
Design and analysis of an automotive single plate friction clutch using different materials SUD Hajam, M Mursaleen AIJR Abstracts, 119, 2021 | 1 | 2021 |
Design and manufacturing of low cost SCARA robot RU Haq, U Kumar, N Kumar, Y Baranwal, M Mursaleen, NA Sheikh Int J Eng Res Technol 10 (06), 2021 | 1 | 2021 |
Mathematical Analysis carried outon the Study of Compatibility, De-lamination and Load-bearing Capacity of Synthetic Diamond Coatings Deposited on Tungsten Carbide Composites KA Najar, NA Sheikh, MM Butt, MA Shah | 1 | 2019 |
Nano-Composites and their Applications: A MM Sajad Hussain | 1 | |
Coupled Thermo-Mechanical Finite Element Analysis of Cranial Implants Using Micromechanical Representative Volume Element Approach AA Lone, NA Sheikh, MM Butt Journal of The Institution of Engineers (India): Series C, 1-12, 2024 | | 2024 |