Follow
Sameer Ali
Sameer Ali
Department of Mechanical Engineering - University of Technology - Baghdad - Iraq
Verified email at uotechnology.edu.iq
Title
Cited by
Cited by
Year
 Akeel Zeki Mahdi, Samir Ali Amin, and Sadeq Hussein Bakhy, Influence of Refill Friction Stir Welding Technique on the Mechanical Properties and Microstructure of …
2020
 Akeel Z. Mahdi, Samir A Amin, and Sadeq H. Bakhy, Effect of Different Friction Stir Spot Welding Techniques on the Mechanical Properties and Microstructure of Aluminum AA2024 …
2019
 Samir A. Amin and Ali Y. Hassan, Experimental and Numerical Study of Smart Polymeric Composite Beam Embedded with Ni-Ti Shape Memory Alloy, Thi-Qar University Journal for …
2019
 Mohannad Yousif Hanna, Samir Ali Amin and Abdulaziz Saud Khider, Study of Mechanical Properties of Carbon Steel Plate SA-516 Gr. 70 Welded by SAW Using Square-Shape Joint …
2019
 Samir Ali Amin Alrabii, Mohannad Yousif Hanna, and Abdlaziz Saud Khider, Study of Mechanical Properties of carbon Steel Plate SA-516 Gr.70 Welded by SAW Using V-shape Joint …
2019
 Samir Ali Amin Alrabii, Burr Formation Mechanisms during Slot-End Milling Operations for Low Carbon and Stainless Steels, Accepted and to be published in Journal of …
2019
 Shaker S. Hassan, Samir A. Amin and Asaad. A. Dabish, Using RSM Technique for Modeling and Optimization the Influence of Cutting Parameters on Tool Wear and Cutting Forces in …
2018
 Samir A. Amin and Ali Y. Hassan, Experimental Study of Mechanical Properties of Type Linear Low Density Polyethylene and Mold Design, Engineering and Technology Journal, Vol …
2018
 Samir Ali Amin and Ali Yasser Hassan, Experimental and Finite Elements Analysis Study of Warming Effect on Deboned Force for Embedded NiTinol Wire into Linear Low Density …
2018
 Sadeq H. Bakhy, Samir A. Amin, and Fouad A. Abdullah, Influence of SAW Welding Parameters on Microhardness of Steel A516-Gr60, Engineering and Technology Journal, Vol. 36 …
2018
 Samir Ali Amin, Sadeq Hussein Bakhy, and Fouad Ali Abdullah, "Study the effect of welding parameters on the residual stresses induced by submerged arc welding process", Al …
2017
 Samir Ali Amin, “Burr Formation Mechanisms during Drilling Operations of Low Carbon and Stainless Steels”, Journal of Engineering and Technology,Vol.34, Part (A), No.6, pp …
2016
 Ahmed Naif Al-Khazraji, Samir Ali Al-Rabii, and Hameed Shamkhi,“ Validation of Derived Equation Using Energy Technique for Calculating the Critical Buckling Load for …
2016
 Ahmed Naif Al-Khazraji, Samir Ali Al-Rabii, and Hameed Shamkhi Al- Khazalli, “Enhancement of buckling resistance of Aluminized Long Columns of Stainless …
2016
 Ahmed Naif Ibrahim, Samir Ali Amin and Saad Mahmood Ali, “The effect of SiC powder mixing electrical discharge machining on white layer thickness, heat flux and fatigue life …
2016
 Ahmed Naif Al-Khazraji, Samir Ali Al-Rabii, and Hameed Shamkhi Al-Khazalli, “Optimization of Hot-Dip Aluminizing Process Parameters of AISI 303 Stainless Steel Using RSM …
2015
 Ahmed Naif Ibrahim, Samir Ali Amin and Saad Mahmood Ali, “Studying and Modeling the Effect of Graphite Powder Mixing Electrical Discharge Machining on the Main Process …
2015
 Ahmed Naif Ibrahim, Samir Ali Amin and Saad Mahmood Ali, “Prediction of Surface Roughness, Material Removal Rate and Tool Wear Ratio Models for Sic Powder Mixing EDM …
2015
 Ahmed Naif Ibrahim, Samir Ali Amin and Saad Mahmood Ali, “Study the effect of the Graphite Powder Mixing Electric Discharge Machining on Creation of Surface Residual …
2015
 Ahmed Naif Ibrahim, Samir Ali Amin and Saad Mahmood Ali, “Effect of SiC Powder Mixing (PMEDM) on Surface Residual Stresses Using Copper and Graphite Electrodes”, Elixir Mech …
2015
The system can't perform the operation now. Try again later.
Articles 1–20