| Successful closed-loop recycling of thermoset composites J Palmer, OR Ghita, L Savage, KE Evans Composites Part A: Applied Science and Manufacturing 40 (4), 490-498, 2009 | 364 | 2009 |
| Discrete element simulation and experimental study of powder spreading process in additive manufacturing S Haeri, Y Wang, O Ghita, J Sun Powder Technology 306, 45-54, 2017 | 336 | 2017 |
| Fused Deposition Modelling of high temperature polymers: Exploring CNT PEEK composites S Berretta, R Davies, YT Shyng, Y Wang, O Ghita Polymer Testing 63, 251-262, 2017 | 216 | 2017 |
| Sheet moulding compound (SMC) from carbon fibre recyclate J Palmer, L Savage, OR Ghita, KE Evans Composites Part A: Applied Science and Manufacturing 41 (9), 1232-1237, 2010 | 184 | 2010 |
| Morphology of polymeric powders in Laser Sintering (LS): From Polyamide to new PEEK powders S Berretta, O Ghita, KE Evans European Polymer Journal 59, 218-229, 2014 | 152 | 2014 |
| Processability of PEEK, a new polymer for high temperature laser sintering (HT-LS) S Berretta, KE Evans, O Ghita European Polymer Journal 68, 243-266, 2015 | 150 | 2015 |
| Additive manufacture of PEEK cranial implants: Manufacturing considerations versus accuracy and mechanical performance S Berretta, K Evans, O Ghita Materials & Design 139, 141-152, 2018 | 107 | 2018 |
| Physico-chemical behaviour of poly (ether ketone)(PEK) in high temperature laser sintering (HT-LS) OR Ghita, E James, R Trimble, KE Evans Journal of Materials Processing Technology 214 (4), 969-978, 2014 | 102 | 2014 |
| A primary study into graphene/polyether ether ketone (PEEK) nanocomposite for laser sintering B Chen, S Berretta, K Evans, K Smith, O Ghita Applied Surface Science 428, 1018-1028, 2018 | 82 | 2018 |
| Predicting processing parameters in high temperature laser sintering (HT-LS) from powder properties S Berretta, KE Evans, OR Ghita Materials & Design 105, 301-314, 2016 | 80 | 2016 |
| Shrinkage behaviour of semi-crystalline polymers in laser sintering: PEKK and PA12 L Benedetti, B Brulé, N Decreamer, KE Evans, O Ghita Materials & Design 181, 107906, 2019 | 77 | 2019 |
| Polymer viscosity, particle coalescence and mechanical performance in high-temperature laser sintering S Berretta, Y Wang, R Davies, OR Ghita Journal of materials science 51, 4778-4794, 2016 | 72 | 2016 |
| The use of near-infrared spectroscopy for the cure monitoring of an ethyl cyanoacrylate adhesive SK Tomlinson, OR Ghita, RM Hooper, KE Evans Vibrational spectroscopy 40 (1), 133-141, 2006 | 67 | 2006 |
| Studies on the reprocessability of poly (ether ether ketone)(PEEK) AR McLauchlin, OR Ghita, L Savage Journal of Materials Processing Technology 214 (1), 75-80, 2014 | 65 | 2014 |
| Mechanical studies of single glass fibres recycled from hydrolysis process using sub-critical water CC Kao, OR Ghita, KR Hallam, PJ Heard, KE Evans Composites Part A: Applied Science and Manufacturing 43 (3), 398-406, 2012 | 65 | 2012 |
| Powder characteristics, microstructure and properties of graphite platelet reinforced Poly Ether Ether Ketone composites in High Temperature Laser Sintering (HT-LS) Y Wang, D Rouholamin, R Davies, OR Ghita Materials & Design 88, 1310-1320, 2015 | 61 | 2015 |
| Studies on the thermal and mechanical behavior of PLA‐PET blends AR McLauchlin, OR Ghita Journal of Applied Polymer Science 133 (43), 2016 | 57 | 2016 |
| The variation in Poisson’s ratio caused by interactions between core and wrap in helical composite auxetic yarns S Bhattacharya, GH Zhang, O Ghita, KE Evans Composites science and technology 102, 87-93, 2014 | 57 | 2014 |
| High Temperature Laser Sintering (HT-LS): An investigation into mechanical properties and shrinkage characteristics of Poly (Ether Ketone)(PEK) structures O Ghita, E James, R Davies, S Berretta, B Singh, S Flint, KE Evans Materials & Design 61, 124-132, 2014 | 57 | 2014 |
| Interfaces in polyethylene oxide modified cellulose nanocrystalá-ápolyethylene matrix composites NH Inai, AE Lewandowska, OR Ghita, SJ Eichhorn Composites Science and Technology 154, 128-135, 2018 | 54 | 2018 |
