| Enhanced heat transfer RL Webb, NY Kim Taylor and Francis, NY, 2005 | 3218 | 2005 |
| Air-side heat transfer and friction correlations for plain fin-and-tube heat exchangers with staggered tube arrangements NH Kim, B Youn, RL Webb | 178 | 1999 |
| Heat transfer and friction correlations for wavy plate fin-and-tube heat exchangers NH Kim, JH Yun, RL Webb | 128 | 1997 |
| Condensation heat transfer of R-22 and R-410A in flat aluminum multi-channel tubes with or without micro-fins NH Kim, JP Cho, JO Kim, B Youn International Journal of Refrigeration 26 (7), 830-839, 2003 | 112 | 2003 |
| Refrigerant distribution in a parallel flow heat exchanger having vertical headers and heated horizontal tubes HW Byun, NH Kim Experimental Thermal and Fluid Science 35 (6), 920-932, 2011 | 106 | 2011 |
| Particulate fouling of water in tubes having a two-dimensional roughness geometry K Nae-Hyun, RL Webb International journal of heat and mass transfer 34 (11), 2727-2738, 1991 | 99 | 1991 |
| Nucleate pool boiling on structured enhanced tubes having pores with connecting gaps NH Kim, KK Choi International Journal of Heat and Mass Transfer 44 (1), 17-28, 2001 | 98 | 2001 |
| Distribution of air–water annular flow in a header of a parallel flow heat exchanger NH Kim, SP Han International Journal of Heat and Mass Transfer 51 (5-6), 977-992, 2008 | 91 | 2008 |
| Effect of inlet configuration on the refrigerant distribution in a parallel flow minichannel heat exchanger NH Kim, DY Kim, HW Byun International journal of refrigeration 34 (5), 1209-1221, 2011 | 84 | 2011 |
| Two-phase flow distribution of air–water annular flow in a parallel flow heat exchanger NH Kim, TR Sin International Journal of Multiphase Flow 32 (12), 1340-1353, 2006 | 83 | 2006 |
| An experimental investigation on the airside performance of fin-and-tube heat exchangers having sinusoidal wave fins B Youn, NH Kim Heat and mass transfer 43, 1249-1262, 2007 | 49 | 2007 |
| Forced convective boiling of pure refrigerants in a bundle of enhanced tubes having pores and connecting gaps NH Kim, JP Cho, B Youn International journal of heat and mass transfer 45 (12), 2449-2463, 2002 | 44 | 2002 |
| Condensation heat transfer and pressure drop in flattened smooth tubes having different aspect ratios NH Kim, EJ Lee, HW Byun Experimental thermal and fluid science 46, 245-253, 2013 | 38 | 2013 |
| Improvement of two-phase refrigerant distribution in a parallel flow minichannel heat exchanger using insertion devices NH Kim, EJ Lee, HW Byun Applied Thermal Engineering 59 (1-2), 116-130, 2013 | 37 | 2013 |
| Dry and wet air-side performance of a louver-finned heat exchanger having flat tubes NH Kim, SH Kim Journal of Mechanical Science and Technology 24, 1553-1561, 2010 | 37 | 2010 |
| Particulate fouling in enhanced tubes RL Webb, NH Kim 1989 National Heat Transfer Conference, HTD 108, 315, 1989 | 37 | 1989 |
| Air-side performance of louver-finned flat aluminum heat exchangers at a low velocity region NH Kim, JP Cho Heat and mass transfer 44, 1127-1139, 2008 | 34 | 2008 |
| Enhanced tubes for electric utility steam condensers RL Webb, H Jaber, L Chamra, NH Kim EG and G Idaho, Inc., Idaho Falls, ID (USA), 1990 | 33 | 1990 |
| Airside performance of oval tube heat exchangers having sine wave fins under wet condition NH Kim, KJ Lee, YB Jeong Applied thermal engineering 66 (1-2), 580-589, 2014 | 32 | 2014 |
| Effect of inlet configuration on upward branching of two-phase refrigerant in a parallel flow heat exchanger NH Kim, HW Byun International journal of refrigeration 36 (3), 1062-1077, 2013 | 31 | 2013 |
