| Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites AAA Nasir, AI Azmi, ANM Khalil Measurement 75, 298-307, 2015 | 117 | 2015 |
| Roles of new bio-based nanolubricants towards eco-friendly and improved machinability of Inconel 718 alloys MAM Ali, AI Azmi, MN Murad, MZM Zain, ANM Khalil, NA Shuaib Tribology International 144, 106106, 2020 | 60 | 2020 |
| Effect of Al2O3 nanolubricant with SDBS on tool wear during turning process of AISI 1050 with minimal quantity lubricant ANM Khalil, MAM Ali, AI Azmi Procedia Manufacturing 2, 130-134, 2015 | 60 | 2015 |
| Evaluation of mechanical properties of hybrid fiber reinforced polymer composites and their architecture MMW Irina, AI Azmi, CL Tan, CC Lee, ANM Khalil Procedia Manufacturing 2, 236-240, 2015 | 59 | 2015 |
| Experimental study on minimal nanolubrication with surfactant in the turning of titanium alloys MA Mahboob Ali, AI Azmi, AN Mohd Khalil, KW Leong The International Journal of Advanced Manufacturing Technology 92, 117-127, 2017 | 54 | 2017 |
| The effect of cutting parameters on cutting force and tool wear in machining Nickel Titanium Shape Memory Alloy ASTM F2063 under Minimum Quantity Nanolubricant ANM Khalil, AI Azmi, MN Murad, MAM Ali Procedia Cirp 77, 227-230, 2018 | 32 | 2018 |
| Grey relational analyses for multi-objective optimization of turning S45C carbon steel AHA Shah, AI Azmi, ANM Khalil IOP Conference Series: Materials Science and Engineering 114 (1), 012023, 2016 | 22 | 2016 |
| Parametric study on the residual tensile strength of flax natural fibre composites after drilling operation AAA Nasir, AI Azmi, ANM Khalil Procedia Manufacturing 2, 97-101, 2015 | 22 | 2015 |
| Specific cutting energy of Inconel 718 under dry, chilled-air and minimal quantity nanolubricants MAM Ali, AI Azmi, ANM Khalil Procedia CIRP 77, 429-432, 2018 | 19 | 2018 |
| An optimization of shrinkage in injection molding parts by using Taguchi method MT Mustaffa, H Radhwan, AF Annuar, H Azmi, MZ Zakaria, ANM Khalil Journal of Advanced Research in Applied Mechanics 10 (1), 1-8, 2015 | 19 | 2015 |
| Effect of Al2O3 nanolubrication with Sodium Dodecylbenzene Sulfonate (SDBS) on surface roughness and tool wear under MQL during turning of Ti-6AL-4T. MAM Ali, ANM Khalil, AI Azmi IOP Conference Series: Materials Science and Engineering 114 (1), 012110, 2016 | 16 | 2016 |
| Low concentration vegetable oil based nanofluid: Dielectric properties, AC breakdown voltage and kinematic viscosity N Hussin, NA Subri, NA Azizie, ANM Khalil, MKM Jamil, R Abd-Rahman, ... Journal of Physics: Conference Series 1878 (1), 012037, 2021 | 14 | 2021 |
| Minimization on Warpage Defect in Injection Molding Part of ABS (Acrylonitrile Butadiene Styrene) Material by Using Design of Experiment (DOE) H Radhwan, AN Khalil, MF Hamzas International review of Mechanical engineering, 1057-1061, 2014 | 14 | 2014 |
| Tensile behaviour of open hole flax/epoxy composites: influence of fibre lay-up and drilling parameters AA Abdul Nasir, AI Azmi, T Chye Lih, AN Mohd. Khalil, N Kyeun Kim Journal of Composite Materials 53 (4), 445-454, 2019 | 12 | 2019 |
| Optimization of cutting parameters for surface roughness under MQL, using Al2O3 nanolubricant, during Turning of Inconel 718 MAM Ali, ANM Khalil, AI Azmi, HM Salleh IOP Conference Series: Materials Science and Engineering 226 (1), 012067, 2017 | 12 | 2017 |
| The effects of the size of Al2O3 particles in nanolubricant with added SDBS on surface roughness and tool wear during turning of mild steel MAM Ali, ANM Khalil, AI Azmi, HM Salleh AIP Conference Proceedings 1885 (1), 2017 | 11 | 2017 |
| Coupled effects of vortex tube hybrid cooling with minimal quantity reinforced nanoparticle lubricants in turning NiTi alloys ANM Khalil, AI Azmi, MN Murad, AF Annuar, MAM Ali The International Journal of Advanced Manufacturing Technology 105, 3007-3015, 2019 | 9 | 2019 |
| Design and development of a freezer and chiller delivery box MZ Zakaria, GC Hung, MSIM Dawi, R Hussin, ANM Khalil, MKM Naim, ... AIP Conference Proceedings 1885 (1), 2017 | 9 | 2017 |
| Design of transplanting mechanism for system of rice intensification (SRI) transplanter in Kedah, Malaysia MS Imran, MSA Manan, ANM Khalil, MK MdNaim, RN Ahmad IOP Conference Series: Materials Science and Engineering 226 (1), 012036, 2017 | 8 | 2017 |
| Multi-Objective Optimization in CNC Turning of S45C Carbon Steel using Taguchi and Grey Relational Analysis Method AHA Shah, AI Azmi, ANM Khalil Journal of advanced research in applied mechanics 11, 8-15, 2015 | 7 | 2015 |
Ir. Ts. Dr. Azwan Iskandar AzmiAssoc. Prof., Universiti Malaysia PerlisVerified email at unimap.edu.my
