Fatigue Study of E-glass Fiber Reinforced Polyester Composite under Fully Reversed Loading and Spectrum Loading DMZ Khelifa Engineering &Technology Journal 26 (10), 2008 | 26 | 2008 |
Tribological Characteristics Evaluation of Mustard Oil Blends M Mohammed Journal of Engineering 24 (3), 1-12, 2018 | 18* | 2018 |
PERFORMANCE FEATURES OF THE SUNFLOWER SEEDS OIL AS A HYDRAULIC BIO FLUID UNDER VARIOUS NORMAL LOADS H Mohammed, Muhannad , Israa Jurnal Teknologi 82 (2), 1-13, 2020 | 9 | 2020 |
Mechanical Properties Comparison of Four Models, Failure Theories Study and Estimation of Thermal Expansion Coefficients for Artificial E-glass Polyester Composite DMZ Khelifa Engineering &Technology Journal 29 (2), 2011 | 9 | 2011 |
T RIBOLOGICAL PERFORMANCE OF MUSTARD SEEDS OIL UNDER DIFFERENT LOADS USING PIN-ON-DISK TRIBOTESTER MZKARA Mohammed H. Jabal The Iraqi Journal For Mechanical And Material Engineering 18 (4), 527-537, 2018 | 6 | 2018 |
Comparative Analysis of Two Alloys (GTD-111 and IN-738) used in Blade of Gas Turbine Model MS9001E at South Baghdad Station AJO Alaa Jasim Abdulah, Muhannad Z. Khalifa Journal of Physics: Conference Series 1973 (012035), 1-14, 2021 | 5* | 2021 |
Pore formation during sintering of two different composites materials (Fe-Cu) & (Fe-Cu-C) and its effects on wear behavior KD Salman, MZ Khalifa, AM Mohammd Journal of Engineering and Sustainable Development 20 (5), 64-74, 2016 | 5 | 2016 |
The Dynamic Coefficients and Elastic Deformation with Thermal Effect For Cylindrical Pivot Tilting 5-Pad Bearing DMZ Khelifa Engineering &Technology Journal 27 (15), 2009 | 5 | 2009 |
Reducing Vibrations Generated in a Gas Turbine Model MS9001E Used in South Baghdad Power Plant Station by Improving the Design of Bearings with Damper AJO Alaa Jasim Abdulah, Muhannad Z. Khalifa Engineering and Technology Journal 39 (9), 1454-1462, 2021 | 4 | 2021 |
Optimize path planning for medical robot in iraqi hospitals ZD Hussein, MZ Khalifa, IS Kareem Engineering and Technology Journal 33 (5), 1009-1022, 2015 | 4 | 2015 |
Enhancement of Wind Turbine Performance Using Air- Blowing Technique by Modified Strong Implicit Procedure(MSIP) Optimization Solver Method DMZ Khelifa Engineering. & Technology Journal 32 (Part (A), No.6), 2014 | 4 | 2014 |
Optimization of Design Parameters for Manufacturing a Radial Active Magnetic Bearing with 12-Poles MZKJAKM Mohamed N. Hamad Engineering and Technology Journal 40 (1), 207-216, 2022 | 3 | 2022 |
THE EFFECTS OF MULTI-LAYERS SURFACES ON THE ELASTIC DEFORMATION OF JOURNAL BEARING MZ KHALIFA Journal of Engineering Science and Technology 16 (4), 3521-3533, 2021 | 3 | 2021 |
Modeling study of PV power Plants in Different Iraq's Governorates MZF Abdulmunem R.Abdulmunem, Mohammad Hassan Jabal The Iraqi Journal For Mechanical And Material Engineering 18 (4), 628, 2018 | 3 | 2018 |
Theoretical Analyses of the Dynamic Behaviour of Composite Cantilever Beam Manufactured From E-glass Polyester DMZ Khelifa Engineering &Technology Journal 27 (9), 2009 | 3 | 2009 |
Dynamically Loaded Analysis of The Adjustable Hydrodynamic Pads Bearing MZ Khelifa, AH Z’aibel, HK Mehbas Engineering and Technology Journal 26 (8), 1002-1015, 2008 | 2 | 2008 |
Numerical Analysis for Determination of the Vibrations and other Parameters of the First Stage Blade of the Gas Turbine Model (MS9001E) MZKAJO Alaa Jasim Abdulah AIP Conference Proceedings 2415 (060008), 1-11, 2022 | 1 | 2022 |
Planetary Gearbox and Spacing Between Two Sets of Blades To Increase Performance Efficiency for Manufactured Dual Small Wind Turbine RS SALIH, MZ KHALIFA, SF ABD ALKARIM Journal of Engineering Science and Technology 17 (1), 0327-0342, 2022 | 1 | 2022 |
Comparing stress distribution, strain, and total deformation in contact surface for the three types of rack and pinion MZ KHALIFA Periodicals of Engineering and Natural Sciences 9 (4), 956-968, 2021 | 1 | 2021 |
Optimized manufacturing of the small dual wind turbine used to generate electricity in central Iraq areas MZ Khalefa, SF Abd Alkarim, RS Salih IOP Conference Series: Materials Science and Engineering 765 (1), 012023, 2020 | 1 | 2020 |