| Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning H Mirzadeh, M Roostaei, MH Parsa, R Mahmudi Materials & Design 68, 228-231, 2015 | 114 | 2015 |
| Hot compression behavior of GZ31 magnesium alloy M Roostaei, MH Parsa, R Mahmudi, H Mirzadeh Journal of Alloys and Compounds 631, 1-6, 2015 | 60 | 2015 |
| Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy M Roostaei, M Shirdel, MH Parsa, R Mahmudi, H Mirzadeh Materials Characterization 118, 584-592, 2016 | 36 | 2016 |
| Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation H Mirzadeh, M Roostaei, MH Parsa, R Mahmudi International Journal of Materials Research 107 (3), 277-279, 2016 | 21 | 2016 |
| Elucidating the effects of cold rolling route on the mechanical properties of AISI 316L austenitic stainless steel S Mohammadzehi, H Mirzadeh, MJ Sohrabi, M Roostaei, R Mahmudi Materials Science and Engineering: A 865, 144616, 2023 | 14 | 2023 |
| Unveiling the strengthening mechanisms of as-cast micro-alloyed CrMnFeCoNi high-entropy alloys MR Zamani, H Mirzadeh, M Malekan, I Weißensteiner, M Roostaei Journal of Alloys and Compounds 957, 170443, 2023 | 13 | 2023 |
| Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature M Roostaei, R Darabi Materials Science and Technology 36 (13), 1476-1486, 2020 | 8 | 2020 |
| Fabrication of al/mg bimetallic thin-walled ultrafine-grained tube by severe plastic deformation SM Hosseini, M Roostaei, M Mosavi Mashhadi, H Jabbari, G Faraji Journal of Materials Engineering and Performance 31 (5), 4098-4107, 2022 | 7 | 2022 |
| Tailoring the microstructure and mechanical properties of (CrMnFeCoNi) 100-xCx high-entropy alloys: Machine learning, experimental validation, and mathematical modeling MR Zamani, M Roostaei, H Mirzadeh, M Malekan, M Song Current Opinion in Solid State and Materials Science 27 (5), 101105, 2023 | 6 | 2023 |
| Severe plastic deformation close to the melting point enables Mg-Fe nanocomposites with exceptional strength M Roostaei, PJ Uggowitzer, R Pippan, O Renk Scripta Materialia 230, 115428, 2023 | 3 | 2023 |
| Unveiling the effects of Ti microalloying and thermomechanical processing on recrystallization behavior and mechanical properties of type 316 stainless steel S Valeh, H Mirzadeh, M Roostaei, MJ Sohrabi Journal of Materials Research and Technology 27, 6412-6423, 2023 | 1 | 2023 |
| Tailoring the microstructure and mechanical properties of superaustenitic stainless steel by cold rolling and recrystallization annealing MJ Sohrabi, H Mirzadeh, M Roostaei, O Renk, AR Geranmayeh, ... Archives of Civil and Mechanical Engineering 23 (4), 247, 2023 | 1 | 2023 |
| Effect of sigma (σ) phase precipitation on the recrystallization kinetics of AISI 904L superaustenitic stainless steel MJ Sohrabi, M Roostaei, H Mirzadeh, F Spieckermann, AR Geranmayeh, ... Vacuum 220, 112830, 2024 | | 2024 |
| Assessment of different processing strategies to fabricate bulk Mg-Fe nanocomposites M Roostaei, PJ Uggowitzer, R Pippan, O Renk Journal of Alloys and Metallurgical Systems 4, 100034, 2023 | | 2023 |
Hamed Mirzadehhmirzadeh@ut.ac.ir, University of Tehran, Materials Science and Metallurgical EngineeringVerified email at ut.ac.ir
