Failure analysis of adhesively bonded composite joints under transverse impact and different temperatures O Sayman, V Arikan, A Dogan, IF Soykok, T Dogan Composites Part B: Engineering 54, 409-414, 2013 | 65 | 2013 |
Failure analysis of mechanically fastened glass fiber/epoxy composite joints under thermal effects IF Soykok, O Sayman, M Ozen, B Korkmaz Composites Part B: Engineering 45 (1), 192-199, 2013 | 61 | 2013 |
Effects of hot water aging on failure behavior of mechanically fastened glass fiber/epoxy composite joints IF Soykok, O Sayman, A Pasinli Composites Part B: Engineering 54, 59-70, 2013 | 46 | 2013 |
End geometry and pin-hole effects on axially loaded adhesively bonded composite joints IF Soykok Composites Part B: Engineering 77, 129-138, 2015 | 31 | 2015 |
Effects of carbon nanotube inclusion into the carbon fiber reinforced laminated composites on flexural stiffness: A numerical and theoretical study H Taş, IF Soykok Composites Part B: Engineering 159, 44-52, 2019 | 29 | 2019 |
Degradation of single lap adhesively bonded composite joints due to hot water ageing IF Soykok The Journal of Adhesion 93 (5), 357-374, 2017 | 27 | 2017 |
Effects of axial impacts at different temperatures on failure response of adhesively bonded woven fabric glass fiber/epoxy composite joints O Sayman, IF Soykok, T Dogan, A Dogan, V Arikan Journal of Composite Materials 49 (11), 1331-1344, 2015 | 19 | 2015 |
Low temperature and tightening torque effects on the failure response of bolted glass fiber/epoxy composite joints IF Soykok, O Sayman, M Ozen Journal of composite materials 47 (26), 3257-3268, 2013 | 16 | 2013 |
Investigation of the low velocity impact behaviour of shear thickening fluid impregnated Kevlar, hybrid (Kevlar/carbon) and carbon fabrics H Taş, IF Soykok Fibers and Polymers 22 (9), 2626-2634, 2021 | 12 | 2021 |
Strength comparison of ductile and brittle adhesives under single and repeated impacts U Kemiklioglu, O Sayman, T Batar, IF Soykok, T Akderya, E Akan Applied Adhesion Science 3, 1-9, 2015 | 11 | 2015 |
Evaluation of the failure responses of filament wound and pre-preg wrapped glass fiber/epoxy composite tubes under quasi-static torsional loading IF Soykok, AR Ozcan, H Tas Materials Research Express 6 (5), 2019 | 10 | 2019 |
Puncture resistance of STF impregnated MWCNTs-grafted carbon fabrics H Taş, IF Soykok Materials Today Communications 28, 102692, 2021 | 8 | 2021 |
Effect of drop weight impact on the torsional-loading behavior of filament wound and prepreg-wrapped composite tubes IF Soykok, H Tas, O Ozdemir, H Kandas Polymers and Polymer Composites 29 (6), 617-628, 2021 | 7 | 2021 |
The mechanical behaviour of adhesively bonded composite joints under repeated axial impacts at different temperatures U Kemiklioglu, O Sayman, IF Soykok, T Akderya, R Dere Science and Engineering of Composite Materials 24 (6), 865-873, 2017 | 6 | 2017 |
Multi-linear stress analysis in adhesively bonded double-lap joint O Sayman, V Arikan, A Dogan, IF Soykok Journal of Composite Materials 48 (12), 1497-1504, 2014 | 5 | 2014 |
Tabakalı hibrit kompozit profillerin doğal frekanslarının sonlu elemanlar metodu ile belirlenmesi H TAŞ, İF SOYKÖK Journal of Science and Engineering 20 (60), 1045-1056, 2018 | 1 | 2018 |
Torsional Loading Behaviors of Slotted Filament Wound Glass Fiber Reinforced Composite Tubes İF Soykök Akademik Platform Mühendislik ve Fen Bilimleri Dergisi 6 (2), 45-54, 2018 | 1 | 2018 |
Effects of natural mica particle fillers on the mechanical properties of glass fiber/epoxy composite plates IF Soykok, H Taş Journal of the Brazilian Society of Mechanical Sciences and Engineering 46 …, 2024 | | 2024 |
Determinating optimum combination of ageing and manufacturing parameters for laminated composites using response surface methodology R Öztürk, H Taş, IF Soykok Journal of Reinforced Plastics and Composites, 07316844231219314, 2023 | | 2023 |
Hemp Fibers as Reinforcement Material in Polymer Matrix Composites: Effects of Surface Treatment and Fabric Design on Mechanical Properties İF SOYKÖK Multidisciplinary Insights: Geothermal Wells, Preservation, Engineering, And …, 2023 | | 2023 |