| Investigations on tunneling and kissing bond defects in FSW joints for dissimilar aluminum alloys SKS Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan Journal of Alloys and Compounds, Journal of Alloys and Compounds 648, 360-367, 2015 | 190* | 2015 |
| RSM based study of cutting temperature during hard turning with multilayer coated carbide insert SK Shihab, ZA Khan, A Mohammad, AN Siddiqueed Procedia materials science 6, 1233-1242, 2014 | 80 | 2014 |
| A review of turning of hard steels used in bearing and automotive applications SK Shihab, ZA Khan, A Mohammad, AN Siddiquee Production & Manufacturing Research 2 (1), 24-49, 2014 | 69 | 2014 |
| Optimization of surface integrity in dry hard turning using RSM SK Shihab, ZA Khan, AAS Mohammad, AN Siddiquee Sadhana 39, 1035-1053, 2014 | 52 | 2014 |
| Optimization of WEDM process parameters for machining of friction-stir-welded 5754 aluminum alloy using Box–Behnken design of RSM SK Shihab Arabian Journal for Science and Engineering 43 (9), 5017-5027, 2018 | 46 | 2018 |
| Application of MOORA method for multi optimization of GMAW process parameters in stainless steel cladding ANS Suha K. Shihab, Noor Zaman Khan, Pratyush Myla, Sanjay Upadhyay, Zahid A ... Management Science Letters 8 (4), 241–246, 2018 | 25 | 2018 |
| Experimental investigation of surface integrity and multi-objective optimization of end milling for hybrid Al7075 matrix composites SK Shihab, J Gattmah, HM Kadhim Silicon 13 (5), 1403-1419, 2021 | 22 | 2021 |
| Effect of process parameters on microstructure and electrical conductivity during FSW of Al-6101 and pure copper N Sharma, ZA Khan, AN Siddiquee, SK Shihab, MA Wahid Materials Research Express 5 (4), 046519, 2018 | 21 | 2018 |
| Prioritization of lower back pain risk factors among industrial workers using the best–worst method NZ Khan, SK Shihab, R Attri, AN Siddiquee, ZA Khan International Journal of Occupational Safety and Ergonomics, 2019 | 14 | 2019 |
| Investigation of surface integrity during wet turning of hard alloy steel AMANS Suha K. Shihab, Zahid A. Khan Int. J. Machining and Machinability of Materials 16 (1), 22-37, 2014 | 14 | 2014 |
| A Finite Element Analysis of Orthogonal Machining Using Different Tool Edge Geometries SKS Maan Aabid Tawfiq Eng. & Technology 25 (4), 569-583, 2007 | 14* | 2007 |
| Optimization of Process Parameters in Cladding of Stainless Steel over Mild Steel SK Shihab, RH Mohamed, EM Mubarek Materials Today: Proceedings 16, 816–823, 2019 | 13 | 2019 |
| Analysis of chip morphology in dry hard turning of AISI 52100 alloy steel using RSM ZA Khan, SK Shihab, AN Siddiquee International Journal of Machining and Machinability of Materials 17 (6 …, 2015 | 11 | 2015 |
| Application of Grey Relational Analysis Along with Principal Component Analysis for Multi-Response Optimization of Hard Turning ANS Suha K. Shihab, Zahid A. Khan International Journal of Engineering Trends and Technology 38 (5), 238-245, 2016 | 10 | 2016 |
| Effect of Cutting Parameters on Cutting Forces and MRR During Turning Hard Alloy Steel With and Without Coolant ANS Suha K. Shihab, Zahid A. Khan, Aas Mohammad International Journal of Engineering and Advanced Technology (IJEAT) 3 (1 …, 2013 | 10* | 2013 |
| MULTI RESPONSE OPTIMIZATION OF MILLING PROCESS PARAMETERS USING MOORA METHOD AKC Suha K. Shihab International Journal of Mechanical And Production Engineering 3 (4), 2015 | 9 | 2015 |
| Mechanical and physical characteristics of hybrid particles/fibers-polymer composites: A review NH Ali, SK Shihab, MT Mohamed Materials Today: Proceedings 62, 178-183, 2022 | 7 | 2022 |
| Effects of increasing mass scaling in 3D explicit finite element analysis on the wire drawing process J Gattmah, SK Shihab, MT Mohamed, AL Abbas Iop Conference Series: Materials Science and Engineering 1076 (1), 012072, 2021 | 7 | 2021 |
| Evaluation of Surface Roughness and Material Removal Rate in End Milling of Complex Shape EMMM Suha K. Shihab Universal Journal of Mechanical Engineering 4 (3), 69-73, 2016 | 7 | 2016 |
| Application of Response Surface Methodology for Determining Cutting Forces in Hard Turning Using Castrol Coolant ANS Suha K. Shihab, Zahid A . Khan, Aasmohammad Advanced Materials Manufacturing & Characterization 3 (1), 27-35, 2013 | 5* | 2013 |
Arshad Noor Siddiquee, PhD(IITD)Professor, Department of Mechanical Engineering, Jamia Millia Islamia (A central university), INDIAVerified email at jmi.ac.in
