| The effect of air preheating in a biomass CFB gasifier using ASPEN Plus simulation W Doherty, A Reynolds, D Kennedy Biomass and bioenergy 33 (9), 1158-1167, 2009 | 369 | 2009 |
| Computer simulation of a biomass gasification-solid oxide fuel cell power system using Aspen Plus W Doherty, A Reynolds, D Kennedy Energy 35 (12), 4545-4555, 2010 | 195 | 2010 |
| Aspen plus simulation of biomass gasification in a steam blown dual fluidised bed W Doherty, A Reynolds, D Kennedy Technological University Dublin, 2013 | 172 | 2013 |
| Methods of wear testing for advanced surface coatings and bulk materials DM Kennedy, MSJ Hashmi Journal of Materials Processing Technology 77 (1-3), 246-253, 1998 | 155 | 1998 |
| Corrosive effects of salt hydrate phase change materials used with aluminium and copper AJ Farrell, B Norton, DM Kennedy Journal of materials processing technology 175 (1-3), 198-205, 2006 | 132 | 2006 |
| Micro shot blasting of machine tools for improving surface finish and reducing cutting forces in manufacturing DM Kennedy, J Vahey, D Hanney Materials & design 26 (3), 203-208, 2005 | 70 | 2005 |
| Improving the electromechanical performance of dielectric elastomers using silicone rubber and dopamine coated barium titanate L Jiang, A Betts, D Kennedy, S Jerrams Materials & Design 85, 733-742, 2015 | 69 | 2015 |
| Process simulation of biomass gasification integrated with a solid oxide fuel cell stack W Doherty, A Reynolds, D Kennedy Journal of Power Sources 277, 292-303, 2015 | 65 | 2015 |
| Simulation of a circulating fluidised bed biomass gasifier using ASPEN Plus: a performance analysis W Doherty, A Reynolds, D Kennedy Technological University Dublin, 2008 | 54 | 2008 |
| Design of dynamic test equipment for the testing of dental implants M Barry, D Kennedy, K Keating, Z Schauperl Materials & design 26 (3), 209-216, 2005 | 44 | 2005 |
| Eliminating electromechanical instability in dielectric elastomers by employing pre-stretch L Jiang, A Betts, D Kennedy, S Jerrams Journal of Physics D: Applied Physics 49 (26), 265401, 2016 | 39 | 2016 |
| A structured review and classification of demolding issues and proven solutions KD Delaney, G Bissacco, D Kennedy International Polymer Processing 27 (1), 77-90, 2012 | 38 | 2012 |
| Current and future applications of surface engineering D Kennedy, Y Xue, E Mihaylova Technological University Dublin, 2005 | 37 | 2005 |
| The fabrication of dielectric elastomers from silicone rubber and barium titanate: employing equi-biaxial pre-stretch to achieve large deformations L Jiang, A Betts, D Kennedy, S Jerrams Journal of materials science 50, 7930-7938, 2015 | 36 | 2015 |
| Experimental analysis of a scaled, multi-aperture, light-pipe, daylighting system DM Kennedy, F O’Rourke Solar Energy 122, 181-190, 2015 | 35 | 2015 |
| Investigation into the electromechanical properties of dielectric elastomers subjected to pre-stressing L Jiang, A Betts, D Kennedy, S Jerrams Materials Science and Engineering: C 49, 754-760, 2015 | 27 | 2015 |
| Impact of intermetallic precipitates on the tribological and/or corrosion performance of cast aluminium alloys: a short review D Culliton, AJ Betts, D Kennedy International Journal of Cast Metals Research 26 (2), 65-71, 2013 | 26 | 2013 |
| Hydrodynamic performance prediction of a tidal current turbine operating in non-uniform inflow conditions F O'Rourke, F Boyle, A Reynolds, DM Kennedy Energy 93, 2483-2496, 2015 | 25 | 2015 |
| Simulation of a tubular solid oxide fuel cell stack operating on biomass syngas using aspen plus W Doherty, A Reynolds, D Kennedy Journal of the Electrochemical Society 157 (7), B975, 2010 | 22 | 2010 |
| Analysis of wear models for advanced coated materials S Montgomery, D Kennedy, N O'Dowd Technological University Dublin, 2009 | 20 | 2009 |
Wayne DohertyLecturer/Researcher in Mechanical Engineering, Dundalk Institute of TechnologyVerified email at dkit.ie
