| Additively manufactured scaffolds for bone tissue engineering and the prediction of their mechanical behavior: A review XY Zhang, G Fang, J Zhou Materials 10 (1), 50, 2017 | 233 | 2017 |
| Topological design, permeability and mechanical behavior of additively manufactured functionally graded porous metallic biomaterials XY Zhang, G Fang, S Leeflang, AA Zadpoor, J Zhou Acta biomaterialia 84, 437-452, 2019 | 229 | 2019 |
| Effect of subtransus heat treatment on the microstructure and mechanical properties of additively manufactured Ti-6Al-4V alloy XY Zhang, G Fang, S Leeflang, AJ Böttger, A Zadpoor, J Zhou Journal of Alloys and Compounds 735, 1562-1575, 2018 | 198 | 2018 |
| Finite element simulation of the effect of clearance on the forming quality in the blanking process G Fang, P Zeng, L Lou Journal of Materials Processing Technology 122 (2-3), 249-254, 2002 | 142 | 2002 |
| Biomechanical influence of structural variation strategies on functionally graded scaffolds constructed with triply periodic minimal surface XY Zhang, XC Yan, G Fang, M Liu Additive Manufacturing 32, 101015, 2020 | 119 | 2020 |
| Effect of porosity variation strategy on the performance of functionally graded Ti-6Al-4V scaffolds for bone tissue engineering XY Zhang, G Fang, LL Xing, W Liu, J Zhou Materials & Design 157, 523-538, 2018 | 115 | 2018 |
| Computational and experimental investigation into mechanical performances of Poly-L-Lactide Acid (PLLA) coronary stents Qian Wang,Gang Fang,Yinghong Zhao,Guohui Wang,Tao Cai Journal of Mechanical Behavior of Biomedical Materials 65, 415-427, 2017 | 92 | 2017 |
| Three-dimensional thermo–elastic–plastic coupled FEM simulations for metal oblique cutting processes G Fang, P Zeng Journal of Materials Processing Technology 168 (1), 42-48, 2005 | 88 | 2005 |
| Three-dimensional rigid–plastic finite element simulation for the two-roll cross-wedge rolling process G Fang, LP Lei, P Zeng Journal of Materials Processing Technology 129 (1-3), 245-249, 2002 | 86 | 2002 |
| Extrusion of 7075 aluminium alloy through double-pocket dies to manufacture a complex profile G Fang, J Zhou, J Duszczyk Journal of Materials Processing Technology 209 (6), 3050-3059, 2009 | 85 | 2009 |
| 金属材料冲裁过程的有限元模拟 方刚， 曾攀 金属学报 37 (6), 653-657, 2001 | 84 | 2001 |
| A new ray tracing heat source model for mesoscale CFD simulation of selective laser melting (SLM) B Liu, G Fang, L Lei, W Liu Applied Mathematical Modelling 79, 506-520, 2020 | 79 | 2020 |
| FEM simulation of aluminium extrusion through two-hole multi-step pocket dies G Fang, J Zhou, J Duszczyk Journal of Materials Processing Technology 209 (4), 1891-1900, 2009 | 78 | 2009 |
| Effect of pocket design on metal flow through single-bearing extrusion dies to produce a thin-walled aluminium profile G Fang, J Zhou, J Duszczyk Journal of Materials Processing Technology 199 (1-3), 91-101, 2008 | 78 | 2008 |
| Elastocaloric cooling of shape memory alloys: A review J Chen, L Lei, G Fang Materials Today Communications 28, 102706, 2021 | 77 | 2021 |
| 切削加工过程数值模拟的研究进展 方刚， 曾攀 力学进展 31 (3), 394-404, 2001 | 77 | 2001 |
| 基于 ANSYS 平台有限元分析手册: 结构的建模与分析 曾攀， 雷丽萍， 方刚 机械工业出版社, 2011 | 72 | 2011 |
| Multipass cold drawing of magnesium alloy minitubes for biodegradable vascular stents G Fang, W Ai, S Leeflang, J Duszczyk, J Zhou Materials Science and Engineering: C 33 (6), 3481-3488, 2013 | 65 | 2013 |
| An analytical model for rapid predicting molten pool geometry of selective laser melting (SLM) B Liu, G Fang, L Lei Applied Mathematical Modelling 92, 505-524, 2021 | 61 | 2021 |
| Modeling of Dynamic Recrystallization of Magnesium Alloy using Cellular Automata Considering Initial Topology of Grains L Wang, G Fang, L Qian Materials Science and Engineering: A 711, 268–283, 2018 | 61 | 2018 |
Jie ZhouDelft University of Technology, Department of Biomechanical Engineering在 tudelft.nl 的电子邮件经过验证
