Hot rolling behaviour of stir-cast Al 6061 and Al 6082 alloys–SiC fine particulates reinforced composites A El-Sabbagh, M Soliman, M Taha, H Palkowski Journal of Materials Processing Technology 212 (2), 497-508, 2012 | 83 | 2012 |
Effect of rolling and heat treatment on tensile behaviour of wrought Al-SiCp composites prepared by stir-casting AM El-Sabbagh, M Soliman, MA Taha, H Palkowski Journal of Materials Processing Technology 213 (10), 1669-1681, 2013 | 72 | 2013 |
Low temperature bainite in steel with 0.26 wt% C M Soliman, H Mostafa, AS El-Sabbagh, H Palkowski Materials science and engineering: A 527 (29-30), 7706-7713, 2010 | 71 | 2010 |
Development of the low temperature bainite M Soliman, H Palkowski Archives of Civil and Mechanical Engineering 16 (3), 403-412, 2016 | 70 | 2016 |
Ultra-fine bainite structure in hypo-eutectoid steels M Soliman, H Palkowski ISIJ international 47 (12), 1703-1710, 2007 | 70 | 2007 |
Tensile properties and bake hardening response of dual phase steels with varied martensite volume fraction M Soliman, H Palkowski Materials Science and Engineering: A 777, 139044, 2020 | 54 | 2020 |
Fingerinput: Capturing expressive single-hand thumb-to-finger microgestures M Soliman, F Mueller, L Hegemann, JS Roo, C Theobalt, J Steimle Proceedings of the 2018 ACM International Conference on Interactive Surfaces …, 2018 | 52 | 2018 |
A mixed-integer formulation for back-off under constrained predictive control M Soliman, CLE Swartz, R Baker Computers & Chemical Engineering 32 (10), 2409-2419, 2008 | 31 | 2008 |
On factors affecting the phase transformation and mechanical properties of cold-rolled transformation-induced-plasticity–aided steel M Soliman, H Palkowski Metallurgical and Materials Transactions A 39, 2513-2527, 2008 | 30 | 2008 |
Influence of hot working parameters on microstructure evolution, tensile behavior and strain aging potential of bainitic pipeline steel M Soliman, H Palkowski Materials & Design 88, 759-773, 2015 | 28 | 2015 |
Microstructure development and mechanical properties of medium carbon carbide-free bainite steels M Soliman, H Palkowski Procedia Engineering 81, 1306-1311, 2014 | 23 | 2014 |
Alloy and process design of thermo-mechanically processed multiphase ductile iron M Soliman, A Nofal, H Palkowski Materials & Design 87, 450-465, 2015 | 22 | 2015 |
Hot deformation behavior of 6061 and 7108 Al-SiCp composites M Soliman, A El-Sabbagh, M Taha, H Palkowski Journal of materials engineering and performance 22, 1331-1340, 2013 | 18 | 2013 |
Metallurgical phenomena during processing of cold rolled TRIP steel M Soliman, B Weidenfeller, H Palkowski steel research international 80 (1), 57-65, 2009 | 13 | 2009 |
Effect of thermo-mechanical processing on structure and properties of dual-phase matrix ADI with different Si-contents M Soliman, A Nofal, H Palkowski International Journal of Metalcasting 14, 853-860, 2020 | 12 | 2020 |
Thermo-mechanically processed dual matrix ductile iron produced by continuous cooling transformation M Soliman, H Ibrahim, A Nofal, H Palkowski Journal of Materials Processing Technology 227, 1-10, 2016 | 12 | 2016 |
Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual‐Phase Steels YV Shan, M Soliman, H Palkowski, E Kozeschnik steel research international 92 (1), 2000307, 2021 | 11 | 2021 |
Phase transformations and mechanical properties of new austenite-stabilised bainite steels MA Soliman Pieper, 2008 | 11 | 2008 |
Effect of niobium on the microstructure and mechanical properties of alloyed ductile irons and austempered ductile irons M Ahmed, M Soliman, M Youssef, R Bähr, A Nofal Metals 11 (5), 703, 2021 | 10 | 2021 |
Strain Hardening Dependence on the Structure in Dual‐Phase Steels M Soliman, H Palkowski steel research international 92 (4), 2000518, 2021 | 9 | 2021 |