| A review on potential toxicity of dental material and screening their biocompatibility S Shahi, M Özcan, S Maleki Dizaj, S Sharifi, N Al-Haj Husain, A Eftekhari, ... Toxicology mechanisms and methods 29 (5), 368-377, 2019 | 98 | 2019 |
| Flexural strength and Weibull characteristics of stereolithography additive manufactured versus milled zirconia M Revilla-León, NAH Husain, L Ceballos, M Özcan The Journal of prosthetic dentistry 125 (4), 685-690, 2021 | 66 | 2021 |
| Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis NAH Husain, J Camilleri, M Özcan Journal of the mechanical behavior of biomedical materials 64, 104-112, 2016 | 58 | 2016 |
| Evaluation of mechanical and adhesion properties of glass ionomer cement incorporating nano-sized hydroxyapatite particles M Kheur, N Kantharia, T Iakha, S Kheur, NAH Husain, M Özcan Odontology 108 (1), 66-73, 2020 | 42 | 2020 |
| Clinical performance of partial and full-coverage fixed dental restorations fabricated from hybrid polymer and ceramic CAD/CAM materials: a systematic review and meta-analysis N Al-Haj Husain, M Özcan, P Molinero-Mourelle, T Joda Journal of clinical medicine 9 (7), 2107, 2020 | 33 | 2020 |
| Effect of polishing procedures and hydrothermal aging on wear characteristics and phase transformation of zirconium dioxide D Bartolo, G Cassar, NAH Husain, M Özcan, J Camilleri The Journal of prosthetic dentistry 117 (4), 545-551, 2017 | 33 | 2017 |
| A digital cast-free clinical workflow for oral rehabilitation with removable partial dentures: A dental technique NAH Husain, M Özcan, M Schimmel, S Abou-Ayash The Journal of prosthetic dentistry 123 (5), 680-685, 2020 | 32 | 2020 |
| Chemical composition, surface roughness, and ceramic bond strength of additively manufactured cobalt-chromium dental alloys M Revilla-León, NAH Husain, MM Methani, M Özcan The Journal of Prosthetic Dentistry 125 (5), 825-831, 2021 | 29 | 2021 |
| Fracture resistance of Zirconia-reinforced lithium silicate ceramic crowns cemented with conventional or adhesive systems: An in vitro study G D’Addazio, M Santilli, ML Rollo, P Cardelli, I Rexhepi, G Murmura, ... Materials 13 (9), 2012, 2020 | 28 | 2020 |
| A study on topographical properties and surface wettability of monolithic zirconia after use of diverse polishing instruments with different surface coatings N Al‐Haj Husain, M Özcan Journal of Prosthodontics 27 (5), 429-442, 2018 | 27 | 2018 |
| Marginal and internal fit of pre-sintered Co-Cr and zirconia 3-unit fixed dental prostheses as measured using microcomputed tomography EE Daou, H Ounsi, M Özcan, NAH Husain, Z Salameh The Journal of prosthetic dentistry 120 (3), 409-414, 2018 | 25 | 2018 |
| Clinical outcomes and costs of conventional and digital complete dentures in a university clinic: A retrospective study I Arakawa, NAH Husain, M Srinivasan, S Maniewicz, S Abou-Ayash, ... The Journal of Prosthetic Dentistry 128 (3), 390-395, 2022 | 24 | 2022 |
| Chemical composition and flexural strength discrepancies between milled and lithography‐based additively manufactured zirconia M Revilla‐León, N Al‐Haj Husain, AB Barmak, J Pérez‐López, ... Journal of Prosthodontics 31 (9), 778-783, 2022 | 22 | 2022 |
| Mechanical stability of dental CAD-CAM restoration materials made of monolithic zirconia, lithium disilicate, and lithium disilicate–strengthened aluminosilicate glass-ceramic … NAH Husain, T Dürr, M Özcan, U Brägger, T Joda The journal of prosthetic dentistry 128 (1), 73-78, 2022 | 22 | 2022 |
| Wear analysis and topographical properties of monolithic zirconia and CoCr against human enamel after polishing and glazing procedures A Fontolliet, NAH Husain, M Özcan journal of the mechanical behavior of biomedical materials 105, 103712, 2020 | 18 | 2020 |
| Effect of hydrothermal aging on the microhardness of high-and low-viscosity conventional and additively manufactured polymers NAH Husain, AJ Feilzer, CJ Kleverlaan, S Abou-Ayash, M Özcan The journal of prosthetic dentistry 128 (4), 822. e1-822. e9, 2022 | 17 | 2022 |
| Retention forces between primary and secondary CAD/CAM manufactured telescopic crowns: an in vitro comparison of common material combinations M Schimmel, M Walther, N Al-Haj Husain, K Igarashi, J Wittneben, ... Clinical oral investigations, 1-11, 2021 | 17 | 2021 |
| Effect of additional reference objects on accuracy of five intraoral scanners in partially and completely edentulous jaws: An in vitro study V Rutkūnas, A Gedrimienė, NAH Husain, J Pletkus, D Barauskis, ... The Journal of Prosthetic Dentistry 130 (1), 111-118, 2023 | 16 | 2023 |
| Evaluation of adhesion protocol for titanium base abutments to different ceramic and hybrid materials GS Dhesi, S Sidhu, NAH Husain, M Ozcan EUROPEAN JOURNAL OF PROSTHODONTICS AND RESTORATIVE DENTISTRY, 2021 | 14 | 2021 |
| Repair of bulk-fill and nanohybrid resin composites: effect of surface conditioning, adhesive promoters, and long-term aging M Ugurlu, N Al-Haj Husain, M Özcan Materials 15 (13), 4688, 2022 | 13 | 2022 |
