| Experimental determination of friction characteristics at the trabecular bone/porous‐coated metal interface in cementless implants A Shirazi‐Adl, M Dammak, G Paiement Journal of biomedical materials research 27 (2), 167-175, 1993 | 294 | 1993 |
| Mechanical and tribological response of ABS polymer matrix filled with graphite powder BB Difallah, M Kharrat, M Dammak, G Monteil Materials & Design 34, 782-787, 2012 | 156 | 2012 |
| Friction properties at the bone‐metal interface: comparison of four different porous metal surfaces M Dammak, A Shirazi‐Adl, M Schwartz Jr, L Gustavson Journal of Biomedical Materials Research: An Official Journal of The Society …, 1997 | 77 | 1997 |
| Analysis of cementless implants using interface nonlinear friction—experimental and finite element studies M Dammak, A Shirazi-Adl, DJ Zukor Journal of biomechanics 30 (2), 121-129, 1997 | 59 | 1997 |
| Fixation pull-out response measurement of bone screws and porous-surfaced posts A Shirazi-Adl, M Dammak, DJ Zukor Journal of biomechanics 27 (10), 1249-1258, 1994 | 56 | 1994 |
| Bidirectional friction study of cancellous bone‐porous coated metal interface A Hashemi, A Shirazi‐Adl, M Dammak Journal of Biomedical Materials Research: An Official Journal of The Society …, 1996 | 30 | 1996 |
| Wear and friction analysis of polyester coatings with solid lubricant M Zouari, M Kharrat, M Dammak Surface and Coatings Technology 204 (16-17), 2593-2599, 2010 | 28 | 2010 |
| Improvement in the tribological performance of polycarbonate via the incorporation of molybdenum disulfide particles B Ben Difallah, M Kharrat, M Dammak, G Monteil Tribology Transactions 57 (5), 806-813, 2014 | 23 | 2014 |
| A comparative investigation of the tribological behavior and scratch response of polyester powder coatings filled with different solid lubricants M Zouari, M Kharrat, M Dammak, M Barletta Progress in Organic Coatings 77 (9), 1408-1417, 2014 | 22 | 2014 |
| Scratch resistance and tribological performance of thermosetting composite powder coatings system: A comparative evaluation M Zouari, M Kharrat, M Dammak, M Barletta Surface and Coatings Technology 263, 27-35, 2015 | 20 | 2015 |
| Eco-friendly nanocomposites between carboxylated acrylonitrile–butadiene rubber (XNBR) and graphene oxide or graphene at low content with enhanced mechanical properties I Smaoui, A Domatti, M Kharrat, M Dammak, G Monteil Fullerenes, Nanotubes and Carbon Nanostructures 24 (12), 769-778, 2016 | 19 | 2016 |
| Experimental simulation of the friction, temperature, and wear distributions for polyamide–steel gear contact using twin-disc setup M Mbarek, S Rhaiem, M Kharrat, M Dammak Proceedings of the Institution of Mechanical Engineers, Part J: Journal of …, 2016 | 17 | 2016 |
| A comparative study of tapped and untapped pilot holes for bicortical orthopedic screws–3D finite element analysis with an experimental test H Ketata, F Affes, M Kharrat, M Dammak Biomedical Engineering/Biomedizinische Technik 64 (5), 563-570, 2019 | 15 | 2019 |
| Experimental and finite element comparison of various fixation designs in combined loads A Shirazi-Adl, O Patenaude, M Dammak, D Zukor J. Biomech. Eng. 123 (5), 391-395, 2001 | 15 | 2001 |
| Tribological behaviors of PTFE-based composites filled with bronze microparticles A Charfi, S Neili, M Kharrat, M Dammak Journal of Thermoplastic Composite Materials 34 (12), 1639-1653, 2021 | 13 | 2021 |
| On the Friction and Wear Behaviors of PTFE Based Composites Filled with MoS2 and/or Bronze Particles M Trabelsi, M Kharrat, M Dammak Transactions of the Indian Institute of Metals 69, 1119-1128, 2016 | 13 | 2016 |
| Friction behavior of high density polyethylene (hdpe) against 304l steel: An experimental investigation of the effects of sliding direction, sliding history and sliding speed S Dhouibi, M Boujelbene, M Kharrat, M Dammak, A Maalej Journal of Surfaces and Interfaces of Materials 1 (1), 71-76, 2013 | 13 | 2013 |
| Modeling of biomedical interfaces with nonlinear friction properties W Mesfar, A Shirazi‐Adl, M Dammak Bio-medical materials and engineering 13 (1), 91-101, 2003 | 13 | 2003 |
| How a pilot hole size affects osteosynthesis at the screw–bone interface under immediate loading F Affes, H Ketata, M Kharrat, M Dammak Medical Engineering & Physics 60, 14-22, 2018 | 12 | 2018 |
| Mechanical characterisation of interface for steel/polymer composite using pull-out test: shear-lag and frictional analysis M Kharrat, M Dammak, A Charfi Journal of Materials Science and Technology 22 (4), 552-558, 2006 | 12 | 2006 |
