| Analysis of the evolution of the Built-Up Edge and Built-Up Layer formation mechanisms in the dry turning of aeronautical aluminium alloys A Gómez-Parra, M Álvarez-Alcón, J Salguero, M Batista, M Marcos Wear 302 (1-2), 1209-1218, 2013 | 193 | 2013 |
| Characterization and Defect Analysis of Machined Regions in Al-SiC metal matrix composites using an abrasive water jet machining process PF Mayuet Ares, L Rodriguez-Parada, A Gomez-Parra, M Batista Ponce Applied Sciences 10 (4), 1512, 2020 | 25 | 2020 |
| Processing and quality evaluation of additive manufacturing monolayer specimens C Wendt, SR Fernández-Vidal, Á Gómez-Parra, M Batista, M Marcos Advances in Materials Science and Engineering 2016, 2016 | 22 | 2016 |
| Study of the tool wear process in the dry turning of Al–Cu alloy M Batista, I Del Sol, A Gomez-Parra, M Ramirez-Peña, J Salguero Metals 9 (10), 1094, 2019 | 16 | 2019 |
| SOM-SEM-EDS identification of tool wear mechanisms in the dry-machining of aerospace titanium alloys M Álvarez, Á Gómez-Parra, J Salguero, M Batista, MM Huerta, ... Advanced Materials Research 107, 77-82, 2010 | 16 | 2010 |
| Identification, analysis and evolution of the mechanisms of wear for secondary adhesion for dry turning processes of Al-Cu alloys M Batista, J Salguero, Á Gómez-Parra, MS Carrilero, M Álvarez, ... Advanced Materials Research 107, 141-146, 2010 | 16 | 2010 |
| Preliminary study of the influence of manufacturing parameters in fused deposition modeling AP Valerga, M Batista, SR Fernandez, A Gomez-Parra, M Barcena Proceedings of the 26th DAAAM International Symposium, 1004-1008, 2016 | 13 | 2016 |
| SOM based methodology for evaluating shrinkage parameter of the chip developed in titanium dry turning process M Batista, J Salguero, A Gomez-Parra, S Fernández-Vidal, M Marcos Procedia CIRP 8, 534-539, 2013 | 13 | 2013 |
| Study of the influence of cutting parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 alloy dry turned bars A Gómez-Parra, FJ Puerta, EI Rosales, JM González-Madrigal, M Marcos Procedia Engineering 63, 796-803, 2013 | 12 | 2013 |
| Cutting speed-feed based parametric model for macro-geometrical deviations in the dry turning of UNS A92024 Al-Cu alloys JM Sánchez-Sola, M Batista, J Salguero Gómez, Á Gómez-Parra, ... Key Engineering Materials 504, 1311-1316, 2012 | 12 | 2012 |
| 3D-FEM based methodology for analysing contour milling processes of Ti Alloys M Batista, A Morales, A Gómez-Parra, J Salguero, FJ Puerta, M Marcos Procedia Engineering 132, 1136-1143, 2015 | 9 | 2015 |
| Evaluation of the functional performance in turned workpieces: Methodology and application to UNS A92024-T3 Á Gómez-Parra, A Sanz, AJ Gámez Materials 11 (8), 1264, 2018 | 8 | 2018 |
| Experimental methodology for evaluating workpieces surface integrity in dry turning of aerospace alloys JM Clares, JM Vazquez-Martinez, A Gomez-Parra, FJ Puerta, M Marcos Proceedings of the 26th DAAAM International Symposium, 0849-0855, 2016 | 8 | 2016 |
| Tribological wear analysis of laser surface treated Ti6Al4V based on volume lost evaluation JM Vazquez Martinez, J Salguero Gómez, FJ Botana, Á Gómez-Parra, ... Key Engineering Materials 615, 82-87, 2014 | 7 | 2014 |
| Influence of the dry turning parameters on the Ultimate Tensile Strength (UTS) of UNS A92024 samples Á Gómez-Parra, FJ Puerta-Morales, EI Rosales, D García-Jurado, ... Materials Science Forum 797, 65-70, 2014 | 7 | 2014 |
| Estudio de la influencia del mecanizado en el rendimiento funcional de aleaciones de aluminio de uso estratégico en la industria aeronáutica Á Gómez Parra Estudio de la influencia del mecanizado en el rendimiento funcional de …, 2016 | 5 | 2016 |
| An analysis of the influence of cutting parameters on the turning process on the fatigue life of aluminum alloy UNS A92024-T351 Á Gómez-Parra, A Sanz, M Marcos Bárcena Advanced Materials Research 498, 19-24, 2012 | 5 | 2012 |
| 1. Supply chain 4.0 in shipbuilding industry M Ramirez-Peña, AJ Sánchez Sotano, V Pérez-Fernandez, J Salguero, ... Manufacturing in Digital Industries, 1-22, 2020 | 4 | 2020 |
| An analysis of geometrical models for evaluating the influence of feed rate on the roughness of dry turned UNS A92050 (Al-Cu-Li) alloy J Salguero, FJ Puerta, A Gomez-Parra, FJ Trujillo, L Sevilla, M Marcos Advances in Materials and Processing Technologies 2 (4), 578-589, 2016 | 4 | 2016 |
| Taylor’s model based analysis of turning inserts tool-life in the dry turning of UNS R56400 alloy M Batista, P Davim, J Salguero, A Gomez-Parra, M Marcos ASME International Mechanical Engineering Congress and Exposition 46421 …, 2014 | 4 | 2014 |
