Follow
Cristóbal Cortés
Title
Cited by
Cited by
Year
Modeling the gas and particle flow inside cyclone separators
C Cortes, A Gil
Progress in energy and combustion Science 33 (5), 409-452, 2007
5402007
Numerical investigation of NOx emissions from a tangentially-fired utility boiler under conventional and overfire air operation
LI Díez, C Cortés, J Pallarés
Fuel 87 (7), 1259-1269, 2008
2392008
Monitoring and prediction of fouling in coal-fired utility boilers using neural networks
E Teruel, C Cortés, LI Diez, I Arauzo
Chemical Engineering Science 60 (18), 5035-5048, 2005
1332005
Optimization of boiler cold-end and integration with the steam cycle in supercritical units
S Espatolero, C Cortés, LM Romeo
Applied Energy 87 (5), 1651-1660, 2010
1222010
Ash fouling in coal-fired utility boilers. Monitoring and optimization of on-load cleaning
A Valero, C Cortes
Progress in Energy and Combustion Science 22 (2), 189-200, 1996
1071996
Modelling of pulverized coal boilers: review and validation of on-line simulation techniques
LI Díez, C Cortés, A Campo
Applied Thermal Engineering 25 (10), 1516-1533, 2005
1052005
Numerical study of co-firing coal and Cynara cardunculus in a 350 MWe utility boiler
J Pallarés, A Gil, C Cortés, C Herce
Fuel Processing Technology 90 (10), 1207-1213, 2009
962009
Efficiency improvement strategies for the feedwater heaters network designing in supercritical coal-fired power plants
S Espatolero, LM Romeo, C Cortés
Applied Thermal Engineering 73 (1), 449-460, 2014
662014
Gas-particle flow inside cyclone diplegs with pneumatic extraction
A Gil, C Cortes, LM Romeo, J Velilla
Powder Technology 128 (1), 78-91, 2002
612002
Thermal radiation and the second law
A Agudelo, C Cortés
Energy 35 (2), 679-691, 2010
582010
Effect of the solid loading on a PFBC cyclone with pneumatic extraction of solids
A Gil, LM Romeo, C Cortes
Chemical engineering & technology 25 (4), 407-415, 2002
432002
Combustion and heat transfer monitoring in large utility boilers
LI Dı́ez, C Cortés, I Arauzo, A Valero
International journal of thermal sciences 40 (5), 489-496, 2001
422001
Numerical simulation of a bubbling fluidized bed reactor for sorption-enhanced steam methane reforming under industrially relevant conditions: Effect of sorbent (dolomite and …
C Herce, C Cortés, S Stendardo
Fuel processing technology 186, 137-148, 2019
412019
Computationally efficient CFD model for scale-up of bubbling fluidized bed reactors applied to sorption-enhanced steam methane reforming
C Herce, C Cortés, S Stendardo
Fuel Processing Technology 167, 747-761, 2017
382017
Increasing CO< sub> 2</sub> Carrying Capacity of Dolomite by Means of Thermal Stabilization by Triggered Calcination
C Herce, S Stendardo, C Cortés
Chemical Engineering Journal 262, 18-28, 2015
342015
Reflections on lumped models of unsteady heat conduction in simple bodies
C Cortés, A Campo, I Arauzo
International Journal of Thermal Sciences 42 (10), 921-930, 2003
302003
Efficiency of composite fins of variable thickness
C Cortés, LI Díez, A Campo
International journal of heat and mass transfer 51 (9-10), 2153-2166, 2008
292008
Numerical simulation of a secondary aluminum melting furnace heated by a plasma torch
M Carmona, C Cortés
Journal of Materials Processing Technology 214 (2), 334-346, 2014
282014
Evaluation of retrofitting of an industrial steam cracking furnace by means of CFD simulations
JG Rebordinos, C Herce, A González-Espinosa, M Gil, C Cortés, F Brunet, ...
Applied Thermal Engineering 162, 114206, 2019
252019
Thermal analysis of rough micro-fins of variable cross-section by the power series method
LI Díez, S Espatolero, C Cortés, A Campo
International journal of thermal sciences 49 (1), 23-35, 2010
242010
The system can't perform the operation now. Try again later.
Articles 1–20