ANALYZING THE EFFECT OF NOZZLE DIAMETER IN FUSED DEPOSITION MODELING FOR EXTRUDING POLYLACTIC ACID USING OPEN SOURCE 3D PRINTING MISI Nor Aiman Sukindar, Mohd Khairol Anuar Mohd Ariffin, B.T Hang Tuah ... | 92* | 2016 |
ANALYSIS ON THE IMPACT PROCESS PARAMETERS ON TENSILE STRENGTH USING 3D PRINTER REPETIER-HOST SOFTWARE CNABJMISBI Nor Aiman Bin Sukindar, Mohd Khairol Anuar Bin Mohd Ariffin, B. T ... Journal of Engineering and Applied Sciences 12 (10), 3341-3346, 2017 | 36* | 2017 |
Optimization of the Parameters for Surface Quality of the Open-source 3D Printing MISI Nor Aiman Sukindar, Mohd Khairol Anuar Mohd Ariffin, B.T Hang Tuah ... Journal of Mechanical Engineering 3 (1), 33-43,, 2017 | 24* | 2017 |
Slicer method comparison using open-source 3D printer MKAM Ariffin, NA Sukindar, BTHT Baharudin, CNA Jaafar, MIS Ismail IOP Conference Series: Earth and Environmental Science 114 (1), 012018, 2018 | 21 | 2018 |
Analysis on temperature setting for extruding polylactic acid using open-source 3D printer NA Sukindar, MKA Mohd Ariffin, BT Baharuddin, CNA Jaafar, MIS Ismail Asian Research Publishing Network (ARPN), 2017 | 16 | 2017 |
Effects of nozzle die angle on extruding polymethylmethacrylate in open-source 3D printing NA Sukindar, MKAM Ariffin, BT Baharudin, CNA Jaafar, MIS Ismail Journal of Computational and Theoretical Nanoscience 15 (2), 663-665, 2018 | 11 | 2018 |
Comparison on dimensional accuracy using a newly developed nozzle for open-source 3D printer NA Sukindar, MKA Mohd Ariffin, BTHT bin Baharudin, CNA Jaafar, ... Applied Mechanics and Materials 859, 15-19, 2017 | 11 | 2017 |
An analysis on finding the optimum die angle of polylactic acid in fused deposition modelling NA Sukindar, MKA Mohd Ariffin Applied Mechanics and Materials 835, 254-259, 2016 | 8 | 2016 |
Influence of nanocomposites in extrusion-based 3D printing: a review YA Alli, H Anuar, MR Manshor, OM Bankole, NA Abd Rahman, ... Hybrid Advances, 100069, 2023 | 7 | 2023 |
Application of house of quality in the conceptual design of batik wax extruder and printer AMA HAMID, N SHAFFIAR, NORA SUKINDAR, SIS SHAHARUDDIN, ... IIUM Engineering Journal 23 (1), 310-328, 2022 | 4 | 2022 |
Friction and wear behaviours of hard-coated/uncoated bearing steels under nano-additive oil lubrication MH Sulaiman, NH Nordin, NA Sukindar, AN Dahnel, S Kamaruddin Proceedings of the Malaysian International Tribology Conference, 65-68, 2020 | 4 | 2020 |
The effects of printing parameters on the surface quality of metal composite by using fused deposition modeling NA Sukindar, MAM Azhar, NFH Abd Halim, S Kamaruddin, MH Sulaiman Solid State Technology 63 (5), 866-874, 2020 | 4 | 2020 |
The effect of process parameters in extruding scaffold design using synthetic biomaterials MKAM Ariffin, NA Sukindar, BTHTB Baharudin, AB Jaafar, MISB Ismail Int. J. Mod. Manuf. Technol 11 (3), 9-20, 2019 | 4 | 2019 |
Analysis of mechanical properties of polylactic acid using a new 3D printer nozzle NA Sukindar, MKAM Ariffin, BT Baharudin, CNA Jaafar, MIS Ismail Journal of Computational and Theoretical Nanoscience 15 (2), 666-675, 2018 | 4 | 2018 |
Slicer Method Comparison Using Open-source 3D Printer. IOP Conf MKA Mohd Ariffin, NA Sukindar, B Baharudin, CNA Jaafar, MIS Ismail Ser. Earth Environ. Sci 114, 012018, 2018 | 4 | 2018 |
Evaluation of the surface roughness and dimensional accuracy of low-cost 3D-printed parts made of PLA–aluminum NA Sukindar, ASHM Yasir, MD Azhar, MAM Azhar, NFH Abd Halim, ... Heliyon 10 (4), 2024 | 2 | 2024 |
The effects of FDM printing parameters on the compression properties of polymethylmethacrylate (PMMA) using finite element analysis NA Sukindar, NM Samsudin, SIS Shaharuddin, S Kamaruddin International Journal of Integrated Engineering 14 (2), 86-92, 2022 | 2 | 2022 |
The Effect of Printing Parameters on Scaffold Structure Using Low-cost 3D Printer NA Sukindar, AAA Dahan, N Halim, S Kamaruddin, MH Sulaiman, ... Test Eng. Manag 82, 8255-8263, 2020 | 2 | 2020 |
COMPARISON STUDY ON MECHANICAL PROPERTIES OF 3D PRINTED PLA AND PLA/ALUMINIUM COMPOSITES USING FUSED DEPOSITION MODELING TECHNIQUE NA Sukindar, SIS Shaharuddin, S Kamruddin, AZA Azhar, CC Yang Malaysian Journal of Microscopy 18 (1), 2022 | 1 | 2022 |
A REVIEW STUDY ON THE EFFECT OF PRINTING PARAMETERS OF FUSED DEPOSITION MODELLING (FDM) METAL POLYMER COMPOSITE PARTS ON MECHANICAL PROPERTIES AND SURFACE ROUGHNESS NA Sukindar, MAM Azhar, SIS Shaharuddin, S Kamruddin, AZA Azhar, ... Malaysian Journal of Microscopy 18 (1), 2022 | 1 | 2022 |