| The effect of cross linking density on the mechanical properties and structure of the epoxy polymers: molecular dynamics simulation A Shokuhfar, B Arab Journal of molecular modeling 19, 3719-3731, 2013 | 214 | 2013 |
| Synthesis of iron oxide nanoparticles via sonochemical method and their characterization A Hassanjani-Roshan, MR Vaezi, A Shokuhfar, Z Rajabali Particuology 9 (1), 95-99, 2011 | 186 | 2011 |
| Preparation and rheological characterization of asphalt binders reinforced with layered silicate nanoparticles A Zare-Shahabadi, A Shokuhfar, S Ebrahimi-Nejad Construction and Building Materials 24 (7), 1239-1244, 2010 | 184 | 2010 |
| The effect of commercial polyacrylonitrile fibers characterizations on the produced carbon fibers properties A Sedghi, RE Farsani, A Shokuhfar Journal of Materials Processing Technology 198 (1-3), 60-67, 2008 | 129 | 2008 |
| Synthesis and characterization of bismuth oxide nanoparticles via sol-gel method M Mallahi, A Shokuhfar, MR Vaezi, A Esmaeilirad, V Mazinani AJER 3 (4), 162-165, 2014 | 121 | 2014 |
| Experimental study of the influence of adhesive reinforcement in lap joints for composite structures subjected to mechanical loads SMR Khalili, A Shokuhfar, SD Hoseini, M Bidkhori, S Khalili, RK Mittal International Journal of Adhesion and Adhesives 28 (8), 436-444, 2008 | 105 | 2008 |
| Two step synthesis, electromagnetic and microwave absorbing properties of FeCo@ C core–shell nanostructure SSS Afghahi, A Shokuhfar Journal of Magnetism and Magnetic Materials 370, 37-44, 2014 | 100 | 2014 |
| FT-IR study of stabilized PAN fibers for fabrication of carbon fibers RE Farsani, S Raissi, A Shokuhfar, A Sedghi International Journal of Mechanical and Mechatronics Engineering 3 (2), 161-164, 2009 | 93 | 2009 |
| Prediction of hot deformation behaviour of 10Cr–10Ni–5Mo–2Cu steel SM Abbasi, A Shokuhfar Materials Letters 61 (11-12), 2523-2526, 2007 | 88 | 2007 |
| The effect of changing chemical composition on dissimilar Mg/Al friction stir welded butt joints using zinc interlayer A Abdollahzadeh, A Shokuhfar, JM Cabrera, AP Zhilyaev, H Omidvar Journal of Manufacturing Processes 34, 18-30, 2018 | 86 | 2018 |
| In-situ nanocomposite in friction stir welding of 6061-T6 aluminum alloy to AZ31 magnesium alloy A Abdollahzadeh, A Shokuhfar, JM Cabrera, AP Zhilyaev, H Omidvar Journal of Materials Processing Technology 263, 296-307, 2019 | 81 | 2019 |
| Low-velocity impact response of active thin-walled hybrid composite structures embedded with SMA wires SMR Khalili, A Shokuhfar, K Malekzadeh, FA Ghasemi Thin-walled structures 45 (9), 799-808, 2007 | 81 | 2007 |
| Analysis and optimization of smart hybrid composite plates subjected to low-velocity impact using the response surface methodology (RSM) A Shokuhfar, SMR Khalili, FA Ghasemi, K Malekzadeh, S Raissi Thin-Walled Structures 46 (11), 1204-1212, 2008 | 79 | 2008 |
| Predictive modeling of creep in polymer/layered silicate nanocomposites A Shokuhfar, A Zare-Shahabadi, AA Atai, S Ebrahimi-Nejad, M Termeh Polymer Testing 31 (2), 345-354, 2012 | 76 | 2012 |
| Mechanically alloyed Al7075–TiC nanocomposite: Powder processing, consolidation and mechanical strength A Azimi, A Shokuhfar, O Nejadseyfi Materials & Design (1980-2015) 66, 137-141, 2015 | 72 | 2015 |
| Facile synthesis of a SnO2@ rGO nanohybrid and optimization of its methane-sensing parameters S Navazani, A Shokuhfar, M Hassanisadi, M Askarieh, A Di Carlo, ... Talanta 181, 422-430, 2018 | 68 | 2018 |
| Nanostructured Al–Zn–Mg–Cu–Zr alloy prepared by mechanical alloying followed by hot pressing A Azimi, A Shokuhfar, A Zolriasatein Materials Science and Engineering: A 595, 124-130, 2014 | 62 | 2014 |
| Influence of chemical composition and manufacturing conditions on properties of NiTi shape memory alloys K Mehrabi, H Bahmanpour, A Shokuhfar, A Kneißl Materials Science and Engineering: A 481, 693-696, 2008 | 62 | 2008 |
| A comparison of the effects of severe plastic deformation and heat treatment on the tensile properties and impact toughness of aluminum alloy 6061 A Shokuhfar, O Nejadseyfi Materials Science and Engineering: A 594, 140-148, 2014 | 60 | 2014 |
| Influence of catalyst on structural and morphological properties of TiO2 nanostructured films prepared by sol–gel on glass M Alzamani, A Shokuhfar, E Eghdam, S Mastali Progress in Natural Science: Materials International 23 (1), 77-84, 2013 | 60 | 2013 |
