Follow
Luciano Paolinelli
Luciano Paolinelli
Senior Corrosion Engineer, Aker Solutions
Verified email at akersolutions.com
Title
Cited by
Cited by
Year
The effect of pre-corrosion and steel microstructure on inhibitor performance in CO2 corrosion
LD Paolinelli, T Pérez, SN Simison
Corrosion Science 50 (9), 2456-2464, 2008
1722008
The incidence of chromium-rich corrosion products on the efficiency of an imidazoline-based inhibitor used for CO2 corrosion prevention
LD Paolinelli, T Pérez, SN Simison
Materials Chemistry and Physics 126 (3), 938-947, 2011
542011
Study of water wetting and water layer thickness in oil-water flow in horizontal pipes with different wettability
LD Paolinelli, A Rashedi, J Yao, M Singer
Chemical Engineering Science 183, 200-214, 2018
292018
Inhibition of CO2 corrosion of carbon steel with 1% Cr
LD Paolinelli, B Brown, SN Simison, S Nesic
Materials Chemistry and Physics 136 (2-3), 1092-1102, 2012
262012
Characterization of droplet sizes in large scale oil–water flow downstream from a globe valve
LD Paolinelli, A Rashedi, J Yao
International Journal of Multiphase Flow 99, 132-150, 2018
232018
Flow patterns and water wetting in gas-oil-water three-phase flow–A flow loop study
KE Kee, M Babic, S Richter, L Paolinelli, W Li, S Nesic
NACE CORROSION, NACE-2015-6113, 2015
182015
The influence of steel microstructure, chemical composition and precorrosion on CO2 corrosion inhibitor efficiency
LD Paolinelli, SN Simison, T Perez
NACE CORROSION, NACE-07311, 2007
162007
Calculation of mass transfer coefficients for corrosion prediction in two-phase gas-liquid pipe flow
LD Paolinelli, S Nesic
International Journal of Heat and Mass Transfer 165 (Part A), 120689, 2020
142020
Calculation of mass transfer coefficients for corrosion prediction in two-phase gas-liquid pipe flow
LD Paolinelli, S Nesic
Eurocorr 2019, 2019
142019
Phase wetting detection and water layer thickness characterization in two-phase oil-water flow using high frequency impedance measurements
LD Paolinelli, J Yao, A Rashedi
Journal of Petroleum Science and Engineering 157, 671-679, 2017
132017
Hydrodynamic and phase wetting criteria to assess corrosion risk in two-phase oil-water pipe flow
LD Paolinelli, S Nesic
NACE CORROSION, NACE-2016-7408, 2016
122016
Mechanical integrity of corrosion product films on rotating cylinder specimens
LD Paolinelli, GE Carr
Corrosion Science 92, 155-161, 2015
102015
The influence of Cr content on the efficiency of inhibitor of C-Mn steel CO2 corrosion
LD Paolinelli, SN Simison, TE Perez
NACE CORROSION, NACE-06369, 2006
102006
Study of Phase Wetting in Three-Phase Oil-Water-Gas Horizontal Pipe Flow–Recommendations for Corrosion Risk Assessment
LD Paolinelli
NACE CORROSION, NACE-2018-11213, 2018
82018
A comprehensive model for stability of dispersed oil-water flow in horizontal and inclined pipes
LD Paolinelli
Chemical Engineering Science 211, 115325, 2020
72020
Fracture toughness analysis of a ductile steel by means of 3D surface displacements
LD Paolinelli, GE Carr, N Gubeljak, J Predan, MD Chapetti
Engineering Fracture Mechanics 98, 109-121, 2013
52013
Study of water wetting in oil-water flow in a small-scale annular flume
T Gardner, LD Paolinelli, S Nesic
Experimental Thermal and Fluid Science 102, 506-516, 2019
42019
Effect of H2S on CO2 Corrosion of Mild Steel in HPHT Conditions
YS Choi, F Farelas, L Paolinelli, S Nesic, AZB Abas, AM Nor, MF Suhor
NACE CORROSION, D121S051R002, 2021
12021
Influencia del contenido de Cr y de la presencia de cementita en la eficiencia de inhibidores de corrosión en medios salinos con CO2
L Paolinelli, T Pérez, SN Simison
SAM/CONAMET, 2007
12007
TENSIONES RESIDUALES Y DEFORMACIÓN PLÁSTICA EN SUPERFICIES MECANIZADAS DE FUNDICIÓN DE HIERRO ESFEROIDAL DE DISTINTO CONTEO NODULAR
LD Paolinelli, MD Echeverría, N Míngolo, OJ Moncada
SAM-CONAMET 03, 2003
12003
The system can't perform the operation now. Try again later.
Articles 1–20