| Effects of time and temperature on the creep forming of 7075 aluminum alloy: Springback and mechanical properties RA Jeshvaghani, M Emami, HR Shahverdi, SMM Hadavi Materials Science and Engineering: A 528 (29-30), 8795-8799, 2011 | 67 | 2011 |
| Improvement of the corrosion behavior of low carbon steel by laser surface alloying B Abdolahi, HR Shahverdi, MJ Torkamany, M Emami Applied Surface Science 257 (23), 9921-9924, 2011 | 42 | 2011 |
| Galvanic corrosion behavior of dental alloys H Zohdi, M Emami, HR Shahverdi Environmental and industrial corrosion-practical and theoretical aspects …, 2012 | 28 | 2012 |
| Optimization of spring-back in creep age forming process of 7075 Al-Alclad alloy using D-optimal design of experiment method ME Khamneh, M Askari-Paykani, H Shahverdi, SMM Hadavi, M Emami Measurement 88, 278-286, 2016 | 23 | 2016 |
| High temperature tribological behaviour of 31CrMoV9 gas nitrided steel M Emami, HM Ghasemi, J Rassizadehghani Surface engineering 26 (3), 168-172, 2010 | 22 | 2010 |
| Study on formation and characterization of iron aluminide coatings on 9Cr–1Mo steel substrate RA Jeshvaghani, M Emami, O Shafiee, HR Shahverdi Surface and Coatings Technology 240, 365-372, 2014 | 15 | 2014 |
| A combined hot dip aluminizing/laser alloying treatment to produce iron-rich aluminides on alloy steel M Emami, HR Shahverdi, S Hayashi, MJ Torkamany Metallurgical and Materials Transactions A 44, 3176-3184, 2013 | 15 | 2013 |
| Development of New Third-Generation Medium Manganese Advanced High-Strength Steels Elaborating Hot-Rolling and Intercritical Annealing M Emami, M Askari-Paykani, E Farabi, H Beladi, HR Shahverdi Metallurgical and Materials Transactions A 50 (9), 4261-4274, 2019 | 13 | 2019 |
| High temperature performance of an FeAl laser coated 9Cr1Mo steel M Emami, SMM Hadavi, S Hayashi, HR Shahverdi Oxidation of metals 80, 437-451, 2013 | 9 | 2013 |
| Analysis of microstructure, kinetics of isothermal solidification and mechanical properties of IN718/MBF-20/SS316L TLP joints M Emami, B Binesh, JM Heydarzadeh Philosophical Magazine 101 (15), 1726-1749, 2021 | 5 | 2021 |
| Enhancing mechanical properties of medium Mn advanced high-strength steel by inter-critical annealing: elimination of austenizing and quenching steps M Zabihi-Gargari, HR Shahverdi, M Emami, M Askari-Paykani Ironmaking & Steelmaking 47 (10), 1148-1160, 2020 | 5 | 2020 |
| A New Method for the Experimental Evaluation of High-Temperature Erosion-Corrosion in Fluidized Bed Waste Incineration Conditions (in Persian) M Emami, S Hayashi Journal of Advanced Materials in Engineering 38 (3), 101-113, 2019 | 5 | 2019 |
| Effect of Cu addition on microstructure and corrosion behavior of Al–15Mg2Si composite L Hesami, R Taghiabadi, MH Ghoncheh, M Emami, M Saghafi Yazdi Materials Testing 65 (10), 1498-1507, 2023 | 3 | 2023 |
| Correlation between Microstructural Characteristics and Corrosion Properties of Mg-RE Alloys in Ringer’s Solution M Emami, M Bozorg, B Binesh, HRJ Nodooshan Journal of the Electrochemical Society 167 (16), 161511, 2020 | 3 | 2020 |
| High temperature erosion-oxidation behavior of nickel-based alloys containing Mo in fluidized bed waste incineration M Emami, S Hayashi Journal of Advanced Materials in Engineering (Esteghlal) 39 (3), 41-54, 2022 | 2 | 2022 |
| Effects of Testing Temperature and Sliding Speed on the Wear Behavior of a Low Alloy Gas Nitrided Steel M Emami, HM Ghasemi, J Rassizadehghani Advanced Materials Research 264, 1982-1987, 2011 | 2 | 2011 |
| Effect of intercritical annealing temperature and time on the microstructure and mechanical properties of medium Mn advanced high strength steel حمید رضا شاهوردی, امیر سالار دهقانی, محمد ذبیحی, محمد امامی مجله علمی پژوهشی مهندسی ساخت و تولید ایران 8 (11), 16-34, 2022 | 1 | 2022 |
| Effects of Silicon on High Temperature Oxidation and Erosion-Oxidation Behaviors of Nickel Alloys (in Persian) M Emami, S Hayashi Journal of Corrosion Sciences and Engineering 24, 7-19, 2020 | 1* | 2020 |
| Influence of boron addition on microstructure and mechanical properties of medium-Mn advanced high-strength steel M Zabihi-Gargari, M Emami, HR Shahverdi, M Askari-Paykani Journal of Materials Research and Technology 29, 5317-5329, 2024 | | 2024 |
| Effect of solidification cooling rate on corrosion behavior of Al-15Mg2Si composites E Safary, R Taghiabadi, MH Ghoncheh, M Emami, MS Yazdi Materials Today Communications 38, 107948, 2024 | | 2024 |
Hamid Reza ShahverdiTarbiat Modares UniversityVerified email at modares.ac.ir
