| Occupational exposure to dust produced when milling thermally modified wood A Očkajová, M Kučerka, R Kminiak, Ľ Krišťák, R Igaz, R Réh International Journal of Environmental Research and Public Health 17 (5), 1478, 2020 | 58 | 2020 |
| Roughness of surface created by transversal sawing of spruce, beech, and oak wood R Kminiak, M Gaff BioResources 10 (2), 2873-2887, 2015 | 52 | 2015 |
| Effect of number of saw blade teeth on noise level and wear of blade edges during cutting of wood M Kvietková, M Gaff, M Gašparík, R Kminiak, A Kriš BioResources 10 (1), 1657-1666, 2015 | 45 | 2015 |
| The influence of cutting speed and feed speed on surface quality at plane milling of poplar wood Š Barcík, E Pivolusková, R Kminiak, G Wieloch Wood research 54 (2), 109-115, 2009 | 33 | 2009 |
| Methodology of temperature monitoring in the process of CNC machining of solid wood R Igaz, R Kminiak, Ľ Krišťák, M Němec, T Gergeľ Sustainability 11 (1), 95, 2018 | 31 | 2018 |
| Effect of thermal treatment of birch wood by saturated water vapor on granulometric composition of chips from sawing and milling processes from the point of view of its … R Kminiak, KA Orlowski, L Dzurenda, D Chuchala, A Banski Applied Sciences 10 (21), 7545, 2020 | 29 | 2020 |
| Effect of technological parameters and wood properties on cutting power in plane milling of juvenile poplar wood Š Barcík, E Pivolusková, R Kminiak Drvna industrija 59 (3), 107-112, 2008 | 28 | 2008 |
| Fine dust creation during hardwood machine sanding M Pędzik, T Rogoziński, J Majka, K Stuper-Szablewska, P Antov, L Kristak, ... Applied Sciences 11 (14), 6602, 2021 | 26 | 2021 |
| The dependence of surface quality on tool wear of circular saw blades during transversal sawing of beech wood R Kminiak, M Gašparík, M Kvietková BioResources 10 (4), 7123-7135, 2015 | 26 | 2015 |
| Medium-density fiberboard (MDF) and edge-glued panels (EGP) after edge milling-surface roughness after machining with different parameters M Sedlecký, MS Kvietková, R Kminiak BioResources 13 (1), 2005-2021, 2018 | 25 | 2018 |
| The influence of selected factors on energy requirements for plain milling of beech wood. Š Barcík, R Kminiak, T Řehák, M Kvietková | 25 | 2010 |
| Cutting power during cross-cutting of selected wood species with a circular saw R Kminiak, J Kubš BioResources 11 (4), 10528-10539, 2016 | 23 | 2016 |
| Granulometric characterization of wood dust emission from CNC machining of natural wood and medium density fiberboard R Kminiak, M Kučerka, L Kristak, R Reh, P Antov, A Očkajová, ... Forests 12 (8), 1039, 2021 | 17 | 2021 |
| Granulometric composition of chips and dust produced from the process of working thermally modified wood A Očkajová, M Kučerka, R Kminiak, T Rogoziński Acta Facultatis Xylologiae Zvolen res Publica Slovaca 62 (1), 103-111, 2020 | 16 | 2020 |
| Impact of sycamore maple thermal treatment on a granulometric composition of chips obtained due to processing on a CNC machining mentre R Kminiak, L Dzurenda Sustainability 11 (3), 718, 2019 | 14 | 2019 |
| Delenie a obrábanie dreva M Siklienka, R Kminiak, J Šustek, A Jankech Vysokoškolská učebnica, Technická univerzita vo Zvolene, Zvolen, 2017 | 14 | 2017 |
| Impact of tool wear on the quality of the surface in routing of MDF boards by milling machines with reversible blades R Kminiak, M Siklienka, J Sustek Acta Facultatis Xylologiae Zvolen res Publica Slovaca 58 (2), 89, 2016 | 13 | 2016 |
| Indentation hardness and elastic recovery of some hardwood species M Sydor, G Pinkowski, M Kučerka, R Kminiak, P Antov, T Rogoziński Applied Sciences 12 (10), 5049, 2022 | 12 | 2022 |
| Fabrication of structural joinery items of solid wood by the mean of abrasive water jet method R Kminiak, M Gaff Wood research 59 (3), 499-508, 2014 | 12 | 2014 |
| Optimization of cutting process of medium density fibreboards by the abrasive water-jet Š Barcík, M Kvietková, R Kminiak, P Aláč Drvna Industrija 62 (4), 263-268, 2011 | 12 | 2011 |
