Efektifitas Penggunaan Media Digital dalam Proses Belajar Mengajar K Anam, S Mulasi, S Rohana Genderang Asa: Journal of Primary Education 2 (2), 76-87, 2021 | 47 | 2021 |
Tensile strength and fatigue crack growth behaviour of natural fibre metal laminates A Purnowidodo, DBD Sutedja, K Anam Journal of Engineering science and Technology 15 (4), 2809-2822, 2020 | 14 | 2020 |
Thermal stress intensity factors of crack in solid oxide fuel cells K Anam, CK Lin Applied Mechanics and Materials 493, 331-336, 2014 | 7 | 2014 |
Effect of filler volume fraction on mechanical strength and failure mode of aluminium bonded with epoxy-based adhesive K Anam, A Purnowidodo AIP Conference Proceedings 1983 (1), 2018 | 6 | 2018 |
Pengaruh Waktu Tempa dan Tekanan Tempa Terhadap Sifat Mekanik Aisi 1045 Pada Proses Friction Welding K Anam, A Syuhri, H Sutjahjono STATOR: Jurnal Ilmiah Teknik Mesin 1 (1), 95-99, 2018 | 6 | 2018 |
Effect of Fillers Content on Mechanical Strength and Failure Mode of Aluminium Bonded with Epoxy-Based Adhesive K Anam, A Purnowidodo, DF Smaradhana Journal of Engineering and Applied Sciences 11 (4), 2746-2750, 2016 | 6* | 2016 |
Pengaruh Temperatur Pirolisis terhadap Kualitas dan Kinetic Rate Char Hasil Pirolisis Serbuk Kayu Mahoni HR Muhdhor, W Wijayanti, K Anam | 6 | 2014 |
The Effect of Hot Dip Galvanizing Temperature to Corrosion Rate of Steel as the Material for Chopper Machine F Gapsari, PH Setyarini, K Anam, S Azizah, R Yuliati Solid State Phenomena 291, 148-154, 2019 | 5 | 2019 |
The Effect of Fluid Temperature and Crack Size toward Stress Intensity Factor on Geothermal Pipe Installations K Anam, A Purnowidodo, H Wijaya Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 54 (1 …, 2019 | 5 | 2019 |
Pengaruh Woven Angle dan Proses Penekanan terhadap Tegangan Tarik pada Natural Fiber Laminate Composite K Anam, A Purnowidodo, SA Setyabudi Jurnal Rekayasa Mesin 9 (3), 155-162, 2018 | 5 | 2018 |
Pengaruh Jenis Perekat Alam Terhadap Karakteristik Mekanik Sambungan Kayu Balsa dan Kayu Pinus MS Ma’arif, K Anam, RT Putri, M Fadlurahman Proceeding of the Seminar Nasional Tahunan Teknik Mesin (SNTTM), 57-62, 2018 | 4 | 2018 |
Pengaruh Variasi Fraksi Volume Serat Daun Nanas dan Ukuran Cetakan terhadap Prosentase Penyusutan Komposit Matriks Polyester dengan Cetakan Silikon K Anam, A Purnowidodo, A Octaridwan Yudhanto | 4 | 2015 |
The effect of fiber orientation and stress ratio on the crack growth behavior of fiber metal laminates (FMLs) A Purnowidodo, K Anam, DB Darmadi, A Wahjudi Int J Technol 9, 1039-1048, 2018 | 3 | 2018 |
PERFORMA MICROFRAMEWORK PHP PADA REST API MENGGUNAKAN METODE LOAD TESTING I Yatini, FW Nurwiyati, K Anam Jurnal Informatika Komputer, Bisnis dan Manajemen 19 (2), 12-20, 2021 | 2 | 2021 |
Evaluation of Rubber Seed Oil As Cutting Fluid Using Minimum Quantity Lubrication in the Turning Process of AA6061 PH Setyarini, K Anam, FHP Purnomo International Journal of Engineering Trends and Technology 69 (1), 198-204, 2021 | 2 | 2021 |
Produksi Brown’s Gas Pada Eletrolizer Tipe Drycell Dengan Material Elektroda Berbeda MT Afif, K Anam SAINTEK II Tahun 2017, 165-175, 2017 | 2 | 2017 |
Perbandingan Kinerja Purifikasi Biogas Menggunakan Absorben NaOH dan Ca (OH) 2 LB Wicahyo, D Widhiyanuriyawan, K Anam SAINTEK II Tahun 27, 128-136, 2017 | 2 | 2017 |
Karakteristik Tanah Spodosol dari Kalimantan Timur K Anam Bogor Agricutural University (IPB), 2016 | 2 | 2016 |
The Effect of Residual Stress State in the Notch Root Region Caused by the Hold Period of the Overload to the Fatigue Life A Purnowidodo, A Wahyudi, R Soenoko, K Anam | 2 | 2016 |
Pengaruh Penambahan Serbuk Logam/Non-Logam terhadap Kekuatan dan Perilaku Rambat Retak pada Sambungan Lem Epoxy K Anam Journal of Enviromental Engineering and Sustainable Technology 2 (2), 67-71, 2015 | 2 | 2015 |