| Tip clearance noise of axial flow fans operating at design and off-design condition T Fukano, CM Jang Journal of sound and vibration 275 (3-5), 1027-1050, 2004 | 221 | 2004 |
| Analysis of vortical flow field in a propeller fan by LDV measurements and LES—part I: three-dimensional vortical flow structures CM Jang, M Furukawa, M Inoue J. Fluids Eng. 123 (4), 748-754, 2001 | 185* | 2001 |
| Statistical analysis of wind characteristics using Weibull and Rayleigh distributions in Deokjeok-do Island–Incheon, South Korea S Ali, SM Lee, CM Jang Renewable energy 123, 652-663, 2018 | 91 | 2018 |
| Optimization of a stator blade using response surface method in a single-stage transonic axial compressor CM Jang, KY Kim Proceedings of the Institution of Mechanical Engineers, Part A: Journal of …, 2005 | 84 | 2005 |
| Optimal design of swept, leaned and skewed blades in a transonic axial compressor CM Jang, A Samad, KY Kim Turbo Expo: Power for Land, Sea, and Air 4241, 1279-1288, 2006 | 61 | 2006 |
| Effects of the tip clearance on vortical flow and its relation to noise in an axial flow fan CM Jang, T Fukano, M Furukawa JSME International Journal Series B Fluids and Thermal Engineering 46 (3 …, 2003 | 57 | 2003 |
| Optimum design of hybrid renewable energy system for sustainable energy supply to a remote island S Ali, CM Jang Sustainability 12 (3), 1280, 2020 | 50 | 2020 |
| Determination of the most optimal on-shore wind farm site location using a GIS-MCDM methodology: Evaluating the case of south korea S Ali, SM Lee, CM Jang Energies 10 (12), 2072, 2017 | 50 | 2017 |
| Optimization of blade sweep in a transonic axial compressor rotor CM Jang, P Li, KY Kim JSME International Journal Series B Fluids and Thermal Engineering 48 (4 …, 2005 | 50 | 2005 |
| Experimental analysis on tip leakage and wake flow in an axial flow fan according to flow rates CM Jang, D Sato, T Fukano | 49 | 2005 |
| Techno-economic assessment of wind energy potential at three locations in South Korea using long-term measured wind data S Ali, SM Lee, CM Jang Energies 10 (9), 1442, 2017 | 46 | 2017 |
| Noise reduction by controlling tip vortex in a propeller fan CM Jang, M Furukawa, M Inoue JSME International Journal Series B Fluids and Thermal Engineering 44 (4 …, 2001 | 41 | 2001 |
| Performance characteristics of turbo blower in a refuse collecting system according to operation conditions CM Jang, DW Kim, SY Lee Journal of Mechanical Science and Technology 22, 1896-1901, 2008 | 34 | 2008 |
| Frequency characteristics of fluctuating pressure on rotor blade in a propeller fan CM Jang, M Furukawa, M Inoue JSME International Journal Series B Fluids and Thermal Engineering 46 (1 …, 2003 | 33 | 2003 |
| Numerical investigation on aerodynamic performance of a centrifugal fan with splitter blades JH Kim, KH Cha, KY Kim, CM Jang International Journal of Fluid Machinery and Systems 5 (4), 168-173, 2012 | 32 | 2012 |
| Bubble size and bubble concentration of a microbubble pump with respect to operating conditions SY Jeon, JY Yoon, CM Jang Energies 11 (7), 1864, 2018 | 29 | 2018 |
| Effects of instantaneous tangential velocity on the aerodynamic performance of an H-Darrieus wind turbine S Ali, SM Lee, CM Jang Energy Conversion and Management 171, 1322-1338, 2018 | 26 | 2018 |
| Performance enhancement of a pump impeller using optimal design method SY Jeon, CK Kim, SM Lee, JY Yoon, CM Jang Journal of Thermal Science 26, 119-124, 2017 | 20 | 2017 |
| Enhancement of performance by blade optimization in two-stage ring blower CM Jang, GY Han Journal of Thermal Science 19, 383-389, 2010 | 20 | 2010 |
| Selection of Best-suited wind turbines for new wind farm sites using techno-economic and GIS analysis in South Korea S Ali, CM Jang Energies 12 (16), 3140, 2019 | 19 | 2019 |
Sang-Moon LeeKICTkict.re.kr의 이메일 확인됨
