Nanocomposites on the basis of thermoplastics and montmorillonite modified by polyvinylpyrrolidone V Krasinskyi, O Suberlyak, Ľ Dulebová, V Antoniuk Key Engineering Materials 756, 3-10, 2017 | 28 | 2017 |
Microstructure, wear behavior and corrosion resistance of WC-FeCrAl and WC-WB-Co coatings J Brezinová, M Landová, A Guzanová, Ľ Dulebová, D Draganovská Metals 8 (6), 399, 2018 | 21 | 2018 |
Possibility of increasing the mechanical strength of carbon/epoxy composites by addition of carbon nanotubes B Duleba, F Greškovič, Ľ Dulebová, T Jachowicz Materials Science Forum 818, 299-302, 2015 | 20 | 2015 |
Simulation and evaluation of carbon/epoxy composite systems using FEM and tensile test B Duleba, Ľ Dulebová, E Spišák Procedia Engineering 96, 70-74, 2014 | 20 | 2014 |
Research into kinetic patterns of chemical metallization of powder-like polyvinylchloride V Moravskyi, I Dziaman, S Suberliak, М Kuznetsova, Т Tsimbalista, ... Восточно-Европейский журнал передовых технологий, 50-57, 2017 | 18 | 2017 |
Sorption capable film coatings with variable conductivity O Grytsenko, E Spišák, Ľ Dulebová, V Moravskii, O Suberlyak Materials Science Forum 818, 97-100, 2015 | 17 | 2015 |
Analysis of the mechanical properties change of PA6/MMT nanocomposite system after ageing Ľ Dulebová, F Greškovič, JW Sikora, V Krasinskyi Key Engineering Materials 756, 52-59, 2017 | 16 | 2017 |
Influence of regrind on properties of plastics produced by injection moulding L Dulebová, F Greškovič Materials Engineering 18, 44-48, 2011 | 16 | 2011 |
The influence of automated machining strategy on geometric deviations of machined surfaces J Varga, T Tóth, P Frankovský, Ľ Dulebová, E Spišák, I Zajačko, J Živčák Applied sciences 11 (5), 2353, 2021 | 15 | 2021 |
Studying the effect of concentration factors on the process of chemical metallization of powdered polyvinylchloride V Moravskyi, А Kucherenko, М Kuznetsova, I Dziaman, О Grytsenko, ... Восточно-Европейский журнал передовых технологий, 40-47, 2018 | 15 | 2018 |
Features of Structure and Properties of pHEMA-gr-PVP Block Copolymers, Obtained in the Presence of Fe2+ O Grytsenko, L Dulebova, O Suberlyak, V Skorokhoda, E Spišák, I Gajdoš Materials 13 (20), 4580, 2020 | 14 | 2020 |
The effect of particulate fillers on hardness of polymer composite L Dulebova, T Garbacz Advances in Science and Technology. Research Journal 11 (3), 66-71, 2017 | 14 | 2017 |
Effectiveness of cellular injection molding process T Garbacz, L Dulebova, V Krasinskyi Advances in Science and Technology Research Journal 7 (18), 74--80, 2013 | 14 | 2013 |
Optimization of contents of two-component polydispersed filler by applying the mathematical design of experiment in forming composites for transport repairing MV Brailo, АV Buketov, SV Yakushchenko, ОО Sapronov, L Dulebova Bulletin of the Karaganda University. Mathematics series 89 (1), 93-104, 2018 | 13 | 2018 |
Optimization of the technological parameters of the graft copolymerization of 2-hydroxyethyl methacrylate with polyvinylpyrrolidone for nickel deposition from salts OM Grytsenko, OP Naumenko, OV Suberlyak, L Dulebova, BV Berezhnyy Vopr. Khimii Khimicheskoi Tekhnologii 1, 25-32, 2020 | 12 | 2020 |
INVESTIGATING EFFECTS OF PRODEGRADANT CONTENT ON SELECTED PROPERTIES OF POLYMER COMPOSITE MATERIALS. T Jachowicz, JW Sikora, Ľ Dulebová Environmental Engineering & Management Journal (EEMJ) 16 (12), 2017 | 12 | 2017 |
The influence of modifying HDPE on properties of the surface Ľ Dulebová, T Garbacz, V Krasinskyi, B Duleba Materials Science Forum 818, 101-104, 2015 | 11 | 2015 |
Porophors used in the extrusion process T Garbacz, L Dulebova Lviv Polytechnic Publishing House, 2013 | 10 | 2013 |
Utilization of polypropylene in the production of metal-filled polymer composites: Development and characteristics V Moravskyi, A Kucherenko, M Kuznetsova, L Dulebova, E Spišák, ... Materials 13 (12), 2856, 2020 | 9 | 2020 |
Regularities of obtaining metal-filled polymer composites AN Kucherenko, VS Moravskyi, MY Kuznetsova, ON Grytsenko, ... Nanomaterials in Biomedical Application and Biosensors (NAP-2019), 59-66, 2020 | 9 | 2020 |