| Transcritical or supercritical CO2 cycles using both low-and high-temperature heat sources YM Kim, CG Kim, D Favrat Energy 43 (1), 402-415, 2012 | 274 | 2012 |
| Energy and exergy analysis of a micro-compressed air energy storage and air cycle heating and cooling system YM Kim, D Favrat Energy 35 (1), 213-220, 2010 | 238 | 2010 |
| Potential and evolution of compressed air energy storage: energy and exergy analyses YM Kim, JH Lee, SJ Kim, D Favrat Entropy 14 (8), 1501-1521, 2012 | 226 | 2012 |
| Effective grain size and charpy impact properties of high-toughness X70 pipeline steels B Hwang, YG Kim, S Lee, YM Kim, NJ Kim, JY Yoo Metallurgical and materials transactions A 36, 2107-2114, 2005 | 226 | 2005 |
| Operating characteristics of constant-pressure compressed air energy storage (CAES) system combined with pumped hydro storage based on energy and exergy analysis YM Kim, DG Shin, D Favrat Energy 36 (10), 6220-6233, 2011 | 188 | 2011 |
| Supercritical CO2 Rankine cycles for waste heat recovery from gas turbine YM Kim, JL Sohn, ES Yoon Energy 118, 893-905, 2017 | 183 | 2017 |
| Transformation behavior and microstructural characteristics of acicular ferrite in linepipe steels YM Kim, H Lee, NJ Kim Materials Science and Engineering: A 478 (1-2), 361-370, 2008 | 183 | 2008 |
| Effects of cerium addition on the microstructure, mechanical properties and hot workability of ZK60 alloy H Yu, YM Kim, BS You, HS Yu, SH Park Materials Science and Engineering: A 559, 798-807, 2013 | 177 | 2013 |
| Key factor influencing the ignition resistance of magnesium alloys at elevated temperatures YM Kim, CD Yim, HS Kim, BS You Scripta Materialia 65 (11), 958-961, 2011 | 145 | 2011 |
| Grain refining mechanism in Mg–Al base alloys with carbon addition YM Kim, CD Yim, BS You Scripta Materialia 57 (8), 691-694, 2007 | 131 | 2007 |
| Thermodynamic analysis of a dual loop heat recovery system with trilateral cycle applied to exhaust gases of internal combustion engine for propulsion of the 6800 TEU container … BC Choi, YM Kim Energy 58, 404-416, 2013 | 126 | 2013 |
| Improved mechanical properties of Mg–7.6 Al–0.4 Zn alloy through aging prior to extrusion JG Jung, SH Park, H Yu, YM Kim, YK Lee, BS You Scripta Materialia 93, 8-11, 2014 | 116 | 2014 |
| Analysis of abnormal fracture occurring during drop-weight tear test of high-toughness line-pipe steel B Hwang, S Lee, YM Kim, NJ Kim, JY Yoo, CS Woo Materials Science and Engineering: A 368 (1-2), 18-27, 2004 | 111 | 2004 |
| Effects of extrusion speed on the microstructure and mechanical properties of ZK60 alloys with and without 1 wt% cerium addition H Yu, SH Park, BS You, YM Kim, HS Yu, SS Park Materials Science and Engineering: A 583, 25-35, 2013 | 105 | 2013 |
| Isothermal transcritical CO2 cycles with TES (thermal energy storage) for electricity storage YM Kim, DG Shin, SY Lee, D Favrat Energy 49, 484-501, 2013 | 105 | 2013 |
| Single-loop organic Rankine cycles for engine waste heat recovery using both low-and high-temperature heat sources YM Kim, DG Shin, CG Kim, GB Cho Energy 96, 482-494, 2016 | 103 | 2016 |
| Effects of molybdenum and vanadium addition on tensile and charpy impact properties of API X70 linepipe steels YM Kim, SY Shin, H Lee, B Hwang, S Lee, NJ Kim Metallurgical and Materials Transactions A 38, 1731-1742, 2007 | 94 | 2007 |
| Correlation of microstructure and fracture properties of API X70 pipeline steels B Hwang, YM Kim, S Lee, NJ Kim, SS Ahn Metallurgical and Materials Transactions A 36, 725-739, 2005 | 94 | 2005 |
| Identification of a Novel Dioxygenase Involved in Metabolism of o-Xylene, Toluene, and Ethylbenzene by Rhodococcus sp. Strain DK17 D Kim, JC Chae, GJ Zylstra, YS Kim, SK Kim, MH Nam, YM Kim, E Kim Applied and Environmental Microbiology 70 (12), 7086-7092, 2004 | 91 | 2004 |
| A new high-strength extruded Mg-8Al-4Sn-2Zn alloy SH Park, JG Jung, YM Kim, BS You Materials Letters 139, 35-38, 2015 | 83 | 2015 |
