| An experimental investigation into size effects in quasi-isotropic carbon/epoxy laminates with sharp and blunt notches X Xu, MR Wisnom, Y Mahadik, SR Hallett Composites Science and Technology 100, 220-227, 2014 | 80 | 2014 |
| A numerical investigation into size effects in centre-notched quasi-isotropic carbon/epoxy laminates X Xu, MR Wisnom, X Li, SR Hallett Composites Science and Technology 111, 32-39, 2015 | 72 | 2015 |
| Deducing the R-curve for trans-laminar fracture from a virtual Over-height Compact Tension (OCT) test X Xu, MR Wisnom, SR Hallett Composites Part A: Applied Science and Manufacturing 118, 162-170, 2019 | 34 | 2019 |
| Scaling of fracture response in over-height compact tension tests X Xu, MR Wisnom, Y Mahadik, SR Hallett Composites Part A: Applied Science and Manufacturing 69, 40-48, 2015 | 34 | 2015 |
| Effect of out-of-plane wrinkles in curved multi-directional carbon/epoxy laminates X Xu, MI Jones, H Ali, MR Wisnom, SR Hallett Composites Science and Technology 197, 108282, 2020 | 32 | 2020 |
| In situ characterization of trans-laminar fracture toughness using X-ray Computed Tomography X Sun, S Takeda, MR Wisnom, X Xu Composites Communications 21, 100408, 2020 | 24 | 2020 |
| Unification of strength scaling between unidirectional, quasi-isotropic, and notched carbon/epoxy laminates X Xu, MR Wisnom, K Chang, SR Hallett Composites Part A: Applied Science and Manufacturing 90, 296-305, 2016 | 24 | 2016 |
| Predicting notched tensile strength of full-scale composite structures from small coupons using fracture mechanics X Xu, S Takeda, Y Aoki, SR Hallett, MR Wisnom Composite Structures 180, 386-394, 2017 | 23 | 2017 |
| Virtual characterization of nonlocal continuum damage model parameters using a high fidelity finite element model J Reiner, X Xu, N Zobeiry, R Vaziri, SR Hallett, MR Wisnom Composite Structures 256, 113073, 2021 | 21 | 2021 |
| Experimental investigation of high velocity oblique impact and residual tensile strength of carbon/epoxy laminates AR Kristnama, X Xu, D Nowell, MR Wisnom, SR Hallett Composites Science and Technology 182, 107772, 2019 | 19 | 2019 |
| Delamination suppression in tapered unidirectional laminates with multiple ply drops using a tape scarfing technique T Gordon, X Xu, L Kawashita, MR Wisnom, SR Hallett, BC Kim Composites Part A: Applied Science and Manufacturing 150, 106627, 2021 | 15 | 2021 |
| Stacking sequence effects in over-height compact tension tests of quasi-isotropic laminates X Xu, MR Wisnom, SR Hallett, N Zobeiry, S Leslie, A Poursartip, R Vaziri 19th International Conference on Composite Materials. Montreal, 2013 | 15 | 2013 |
| Initial R-curves for trans-laminar fracture of quasi-isotropic carbon/epoxy laminates from specimens with increasing size X Xu, X Sun, MR Wisnom Composites Science and Technology 216, 109077, 2021 | 14 | 2021 |
| Experimental determination of Through-Thickness Compression (TTC) enhancement factor for Mode II fracture energy X Xu, MR Wisnom, X Sun, SR Hallett Composites Science and Technology 165, 66-73, 2018 | 13 | 2018 |
| Novel tape termination method for automated fibre placement: Cutting characteristics and delamination suppression T Gordon, X Xu, MR Wisnom, BC Kim Composites Part A: Applied Science and Manufacturing 137, 106023, 2020 | 12 | 2020 |
| The effect of transverse compressive stresses on tensile failure of carbon fibre/epoxy composites T Rev, MR Wisnom, X Xu, G Czél Composites Part A: Applied Science and Manufacturing, 106894, 2022 | 11 | 2022 |
| An experimental study of scaling effects in notched quasi-isotropic carbon/epoxy laminates under compressive loads X Xu, A Paul, X Sun, MR Wisnom Composites Part A: Applied Science and Manufacturing 137, 106029, 2020 | 11 | 2020 |
| Thickness effect on Mode I trans-laminar fracture toughness of quasi-isotropic carbon/epoxy laminates X Xu, A Paul, MR Wisnom Composite Structures 210, 145-151, 2019 | 10 | 2019 |
| An experimental and numerical investigation of the interaction between splits and edge delaminations in [+ 20m/-20m] ns carbon/epoxy laminates X Xu, MR Wisnom 15th European Conference on Composite Materials. Venice, 2012 | 9 | 2012 |
| Investigation of Fracture Process Zone Development in Quasi-isotropic Carbon/Epoxy Laminates using in situ and ex situ X-ray Computed Tomography X Xu, S Takeda, MR Wisnom Composites Part A: Applied Science and Manufacturing, 107395, 2022 | 6 | 2022 |
Stephen HallettUniversity of BristolVerified email at bristol.ac.uk
